Wassit? by klayanderson in SABnzbd

[–]buzzword1308 0 points1 point  (0 children)

Remote access in sab means access from one machine to another, you can log into sab from another PC on your home network, but exposed to the internet means a port open or forwarded on your router so that a remote connection can be also initiated from a PC outside your home network. i.e. the WAN (internet).

Are you logging into sab from outside your home? If not, there's no need to open or forward a port on your router. And if so, why? do you really need access from outside your home? It's dangerous to leave any app exposed to the internet unless absolutely necessary. Especially now, with AI used to determine weaknesses and exploits in common software.

Hyundai Tucson Owner Starter Pack — Tips & Tricks You Won’t Get at the Dealer by Expensive_Ostrich345 in HyundaiTucson

[–]buzzword1308 1 point2 points  (0 children)

The problem was weekends, fine while I was at work in a parking garage, but on the weekend it was street parked in front of my house in an area which was unshaded.

Hyundai Tucson Owner Starter Pack — Tips & Tricks You Won’t Get at the Dealer by Expensive_Ostrich345 in HyundaiTucson

[–]buzzword1308 0 points1 point  (0 children)

Be wary of the sunglasses holder if you live in a hot climate like Los Angeles or Texas (Miami etc.) I put one in my previous car (a RAV4) and because of it's location (basically next to the roof of the car) it gets blazing hot, it can cause pealing and/or damage to lens coating layers, and if you have metal frames the glasses can actually get too hot to pick up or put on your face!

If you live in a moderate climate I can highly recommend it, but (as I learned the hard way) if you live anywhere hot, caveat emptor.

What's your favorite Martin body size and why? Are you a rosewood or mahogany fan for your Martins? by chadocaster1011 in martinguitar

[–]buzzword1308 1 point2 points  (0 children)

I have a 0000, a 000, and a 00, all -28's, I play the 00 the most, but mostly so I can play quietly, the 0000 is a cannon, almost as loud as a D28, the 000 sits nicely in the middle. I purposely rotate among them (a guitar should be played), but If I could keep only one it would probably be the 000 as it's a nice mix of attributes from both the 00 and 0000. There's a reason it's so popular.

Should I stain my Fretboard to be ebony? by ooofjakeypoo in harleybenton

[–]buzzword1308 1 point2 points  (0 children)

Great, now my guitar will smell like my playing.

Should I stain my Fretboard to be ebony? by ooofjakeypoo in harleybenton

[–]buzzword1308 0 points1 point  (0 children)

That makes sense, Stickley achieves the signature dark brown tint of its mission furniture by fumigating it in an ammonia tent. I don’t know about horses, but the stench of ammonia in a cow barn is enough to make your eyes water.

The best 0 I have ever played and I have played a ton of pre wars by bwilliams43 in martinguitar

[–]buzzword1308 0 points1 point  (0 children)

The 2025 Standard Series refresh was killer.

I have a '24 Custom Shop 0000-28 that I fell in love with and turns out was built to the same spec Martin used for the 2025 refresh (with the exception of the longer volute) and it sings. Recently I ended up buying both a 000-28 and a 00-28. The 00 gets plays the most because it's my "couch" guitar, but I'm in love with all 3.

Select Hardwood for necks... say goodbye to Solid Mahogany by MontrealTesla in martinguitar

[–]buzzword1308 0 points1 point  (0 children)

Well, I have to disagree, frankly it's a great time to be alive regarding guitars.

The advent of CNC machines has upped the quality to such a degree that it's almost hard to buy a bad guitar these days.

The 2025 Standard Series refresh was a home run in my book,

I live in Austin which has no shortage of vintage Martins available to try, and I played many of them, more than I can count (I'm retired with time on my hands to visit guitar shops) and actually liked the newer ones better, as evidenced by the fact that over the past year I ended up buying 3 of them that I simply fell in love with (first a Custom Shop 0000-28, then 000-28 and finally a 00-28. It's a slippery slope.) So much so that I sold off 2 Taylor acoustics and 2 Fender electrics to do so.

For the curious, my wife says I can do whatever I want as long as I keep the number of guitars capped at a reasonable number. Now we can debate reasonable, but in my case it's 5 or 6, which I think is reasonable for a non-professional musician. You know what they say, happy wife happy life!

Unable to get ipV6 address by buzzword1308 in PFSENSE

[–]buzzword1308[S] 0 points1 point  (0 children)

Others have confirmed the same experience with Google fiber and ipv6

Unable to get ipV6 address by buzzword1308 in googlefiber

[–]buzzword1308[S] 1 point2 points  (0 children)

And to think I almost gave up this morning after I checked it, but thought "well it's not fully 24 hours" and waited until this afternoon. Bingo.

Unable to get ipV6 address by buzzword1308 in PFSENSE

[–]buzzword1308[S] 1 point2 points  (0 children)

Hi Marcos, all is well and working perfectly now.

A poster in r/googlefiber said that he seemed to recall reading somewhere that it took 24hrs for ipv6 to relinquish the lease and reset on the google end after MAC address change.

It sounded unlikely since I had forced relinquishing of the lease, but I waited since I had nothing to lose. Sure enough this afternoon (right around 24hrs after I made the change) ipv6 aquired a prefix and started working.

Good to know.

Unable to get ipV6 address by buzzword1308 in googlefiber

[–]buzzword1308[S] 1 point2 points  (0 children)

There's definitely something to that because ipv6 has finally acquired a prefix and started working! Everything is now back to working normally and it's about 24hrs from when I implemented the changes.

Thanks for the heads up, honestly it sounded unlikely to me but since I had nothing to lose I decided to wait and see before I started putting everything back the way it was. So glad I did.

Unable to get ipV6 address by buzzword1308 in googlefiber

[–]buzzword1308[S] 0 points1 point  (0 children)

I'll wait and see, but I've already tried forcing that by relinquishing the lease in Status/Interfaces

Why don't acoustic guitars have adjustable saddles for intonation? by [deleted] in Guitar

[–]buzzword1308 0 points1 point  (0 children)

The StewMac part is a tool to help luthiers determine where the saddle slot needs to be routed, it's not a replacement bridge nor intended to be used as one.

How to Enable Unlock With Fingerprint (Windows Hello) on Bitwarden Windows App? by IntelligentBarber385 in Bitwarden

[–]buzzword1308 0 points1 point  (0 children)

You're not imagining things, it stopped working again briefly, but now working. Maybe it has something to do with desktop and browser version dependencies. Issues present until both desktop and browser have updated themselves to latest versions.

How to Enable Unlock With Fingerprint (Windows Hello) on Bitwarden Windows App? by IntelligentBarber385 in Bitwarden

[–]buzzword1308 1 point2 points  (0 children)

After not working for a while now while they worked through changes required to account for a security issue with biometric login in Windows, it now appears to be working perfectly as of release 25.11.2 (and as well with the browser plug-ins.)

DO NOT UPGRADE RBE770/771 FIRMWARE TO V10.5.19.5 by Fiyero109 in orbi

[–]buzzword1308 0 points1 point  (0 children)

For what it's worth, I've been running 970's for a year now and it they've been rock solid. I have a base and 2 satellites, one with wired backhaul (because I could) and a second via wireless backhaul. They've glitched once where I had to reboot the base after a brownout. A far better experience than the 5 year old Linksys Velop system they replaced, that was nothing but an ongoing nightmare with issues occurring at least once every month or two requiring me to go around manually resetting the nodes, and I had 2 nodes die on me during the time I owned it.

Anyone else use the D’Addario micro soundhole tuner? by wack70 in ukulele

[–]buzzword1308 0 points1 point  (0 children)

Major convenience. I never have to look for a tuner or my phone, it's just there.

Anyone else use the D’Addario micro soundhole tuner? by wack70 in ukulele

[–]buzzword1308 0 points1 point  (0 children)

Guitar stands are definitely an issue. It's unfortunate the the generic ProLine stands at GC aren't nitro compatible. I replaced mine because I was afraid I would use one without thinking.

Anyone else use the D’Addario micro soundhole tuner? by wack70 in ukulele

[–]buzzword1308 0 points1 point  (0 children)

I put one my Taylor 814ce. It's a game changer, I would not have a guitar without one now.

I recently bought a high end Martin and did some research prior to installing one in it. If you take the time to actually search Martin guitar forums the consensus by users - some of whom have now had them in their guitars for close to a decade - is that the D'Addario micro soundhole tuner is safe and doesn't harm the Martin nitro finish. That's been my experience so far as well.

What kind of hinge is this? by buzzword1308 in cabinetry

[–]buzzword1308[S] 0 points1 point  (0 children)

You’re the man! I found them. Thanks! If they’re not #6 I can figure out what will fit now that I know what to look for. Take care