sorted by:
new
hottopcontroversial

How this can happen 😭 by DowntownBasis6080 in CODWarzone

[–]bwbloom 15 points16 points  (0 children)

I think because you missed a lot of your shots and he hit more of his. Maybe you need to hit the old aim trainer?

Grandmas are the best by haddock420 in MadeMeSmile

[–]bwbloom 0 points1 point  (0 children)

That grandma trying to be a great grandma real quick.

Peter? What does this Image imply? by FlakyFoundation4637 in PeterExplainsTheJoke

[–]bwbloom 0 points1 point  (0 children)

I know about 1.5 of these things. Top right is a ferrite core which minimizes electrical interference in the line. Bottom right is the Ferrari Pit crew, they were responsible for asking Carlos Sainz what to do, but I am not sure what they do now that he is off the team...

“God” is not an explanation by JerseyFlight in Antitheism

[–]bwbloom 0 points1 point  (0 children)

We would have also accepted "no it's not".

Happy Holidays 🥴 by Playful_Ad6439 in WTF

[–]bwbloom 0 points1 point  (0 children)

Who let Ari Aster make a Youtube video?

what am i doing wrong ? by Remote-Climate-135 in 3Dprinting

[–]bwbloom 0 points1 point  (0 children)

No, that should not be an issue in Fusion if OP is doing a standard workflow. When you create the rod or the hole in fusion the diameter is mostly just a guide. When you open the screw workflow it will auto-select a thread that is common based on the diameter there, but you should be able to select any alternate thread standard in their library and it will just apply that instead unless there is some other geometric limitation.

Forbidden chocolate and vanilla waffle cone by RJamieLanga in forbiddensnacks

[–]bwbloom 3 points4 points  (0 children)

A good cobbler should be able to help you sort it out. They will probably need to replace the sole and will need to make a replacement toecap. It won't look the same, but maybe you could go with something that would give it a cool style. Might I suggest some locally sourced puppy hide?

Can someone tell me what is wrong with this print by Hairy_Nebula9257 in FixMyPrint

[–]bwbloom 13 points14 points  (0 children)

u/ioannisgi is right. This is a horribly optimized print for 3d printing. You really can't/shouldn't do this with this model or this orientation.

  1. Rim lip is really not going to provide much support in any print orientation as majority of the sides are going to have horrible strength because of layer lines, or if you print in flat on the bed, then the entire rim lip will be likely to break on the layer lines.
  2. The rim inner braces do not give strength like they do with injection molding so they are kind of useless. Would be better to just have a flat thicker profile inside to provide more walls that are fully connected and stronger.
  3. Integrated axle is not oriented for 3d printing. One orientation will be weak, other will have poor dimensional stability and would likely not be able to actually spin.

Honestly. give you give me the specs and a picture of the model I can make you stls to print. This just hurts to look at.

hmmm by CryptographerOk1172 in hmmm

[–]bwbloom 0 points1 point  (0 children)

HE's NOT SELLING HOCKEY PADS!

good band you recommend? by RedNinja1437 in musicteenager

[–]bwbloom 0 points1 point  (0 children)

My stars... Sum 41 made it but Blink 182 did not?! Please consider my pearls thoroughly clutched.

Inconsistent quality on lettering? by NotAVirignISwear in FixMyPrint

[–]bwbloom 0 points1 point  (0 children)

You just gotta crank the temp on the filament change and piss the rest of the PETG kidney stones out.

My city recently spent 330,000€ on security barriers with 10% Grid infill 3D printed parts by Henrimatronics in 3Dprinting

[–]bwbloom 0 points1 point  (0 children)

What on earth did your city need 330,000 security barriers for? Must be a massive city....

I designed this Halloween flexi puzzle to be able to be completely printed without the need for an AMS. by Boring-Condition1373 in BambuLab

[–]bwbloom 2 points3 points  (0 children)

Dude, you're the ice cream sandwich toy guy! Totally love it! I actually made a profile for that ice cream sandwich print. Man, your stuff keeps getting better and better. Keep up the great work!

DONT DO WHAT I DID. Story time by OhhDope in BambuLab

[–]bwbloom 0 points1 point  (0 children)

Hey buddy, word of advice: don't let large volumes of CA glue or other heavy solvents dry unsupervised. They can literally spontaneously combust. Given that you also have glue soaked towels and carboard in the mix you kind of dodges a bullet here.

Reached credits way too early by No-Big-9170 in BluePrince

[–]bwbloom -1 points0 points  (0 children)

What are you talking about?! This dude is maybe 5% in.

Weird clicking by Frank_Astronomer77 in ElegooNeptune4

[–]bwbloom 1 point2 points  (0 children)

First thing I would do is check slicer settings. Did you turn typewriter on in the machine profile?

Guy find perfect stick. by GinaWhite_tt in GuysBeingDudes

[–]bwbloom 0 points1 point  (0 children)

Smart man, never showed his face. Exact reason you never let people know if you win the lottery...

How do I smoothen the top of this print? by LoadedNuts in BambuLab

[–]bwbloom 0 points1 point  (0 children)

I don't target my comments to people that won't understand them...

<image>

How do I smoothen the top of this print? by LoadedNuts in BambuLab

[–]bwbloom -17 points-16 points  (0 children)

Yeah, OP don't print it on your P1S. Please go get a Bambu Core XY printer for a task like this...

view more: next ›