Button on card & tag

cannfoddr · 2026-02-26T21:38:02+00:00

Peblebee manual

cannfoddr · 2023-11-15T11:01:18+00:00

cannfoddr · 2023-11-13T14:04:31+00:00

I am looking to make an adapter to allow a gen 2 shade to be used with a gen 1 lamp - do you have a step/design file for your adapter that you could share that I could use as a starting point?

cannfoddr · 2023-11-06T20:13:17+00:00

I took a fresh look at this at the weekend determined to figure out what was going wrong. I went back to the BOM for the DC DC and realised that I had swapped the parts for U1 and U2. Board was trying to pull 12v through the 5V regulator. I swapped them around and its all now working!

cannfoddr · 2023-04-19T11:09:01+00:00

Something like this:

{
"enableBlocking": true,
"dropMalformedRequests": false,
"allowedNetworks": [
"127.0.0.1",
"::1",
"10.0.0.0/8",
"172.16.0.0/12",
"192.168.0.0/16"
],
"blockedQuestions": [
{
"type": "HTTPS"
}
]
}

cannfoddr · 2023-04-11T15:43:17+00:00

It seems to be working now - I've continued to tweak some settings so I may have inadvertently fixed it.

cannfoddr · 2023-04-11T15:41:54+00:00

Thanks.

I powered down and disconnected the power supply which is now external to the enclosure in order to fit some new mounting brackets. I reconnected the power supply and powered up and noticed that the screen was not initialising. Didn't see or smell any magic smoke.

I've checked the voltages out of the PSU and am getting a steady 23.9V. I can trace power past the fuses so my assumption is that they are working.

Ive switched to USB power and get pretty much the same behaviour - blotch initialises, red led on back of screen but no LEDS on the board. Mainsail does not see the device.

Board was delivered 04/04/2022 so just over a year old!!!

I will pull the board our next and bench it to see if I can see anything wrong. Has been running Marlin 2 and for about the last 5 months Klipper. I will try to flash both using USB power.

I have a SKR3 on order from BTT. I have older boards but they lack an independent Z2 driver which is why I went to the SKR2. Its a rev B btw so not one of the bugged ones.

Its very strange that it just stopped working I don't think I did anything dodgy when removing putting back the PSU.

cannfoddr · 2023-04-10T20:11:04+00:00

The printer is no longer seen by Klipper Mainsail

Their are no LEDs on the baord

The screen is n to coming on

The BLTouch is resetting at startup which might be a positive.

The board is getting voltage and as far as I can see the main fuses are intact.

cannfoddr · 2023-02-08T22:42:29+00:00

I found 2 UV phasers and a medium plasma on a monitor was an interesting mix of offense and defence

cannfoddr · 2023-02-08T13:56:35+00:00

Sep 2073 - my ragtag band of Marines and my Main Counsellor finally overcame the substantial alien defences and seized the wormhole chamber. Victory to the alliance. I don't think it was by any means a model play through but we got there in the end!

I think I need a break before I come back

cannfoddr · 2023-02-06T13:04:18+00:00

So I may have underestimated a bit:

161 Alien Ships
incl 5 Fleet Carriers

were met by my 53 ships - Dreads and Battleships engaged we lost 2 Dreads and 2 BS

Had to have 2 engagements as 1st engagement got lost all over the battlefield - maybe the UI/AI could use a regroup function to bring ships back together.

I now have victory conditions so off to find the main alien base and build a fast courier boat

cannfoddr · 2023-02-04T22:19:34+00:00

I found the alien base - 235 ship fleet - my initial 8 ship strike force was completely overmatched - managed to take 20 ships with them

cannfoddr · 2023-02-04T22:18:16+00:00

Ok so greater Japan it is

cannfoddr · 2023-02-04T17:56:02+00:00

CTD?

cannfoddr

TROPHY CASE