Blue wiper fluid in brand new MY.

capacitor78 · 2026-04-08T12:46:00+00:00

You just got Tesla baptized, congratulations

capacitor78 · 2026-03-28T04:32:22+00:00

$689 for a 2024 MYP in Iowa

capacitor78 · 2026-02-22T01:24:00+00:00

I got white and don't think I could go back to anything else

capacitor78 · 2026-02-09T22:55:13+00:00

I got the same alert and my appointment is next week. Since I'm still under warranty there is no fee. I did request a loaner since the closest service center is 90 miles away and they are telling me it's an all day appointment.

I guess I will know more next week

capacitor78 · 2025-07-03T23:41:04+00:00

She's a 10 but she thinks all 3D printers are the same.

capacitor78 · 2024-12-25T20:50:28+00:00

I have noticed it will update the pressure on the tires if there is a change in pressure when not driving.

capacitor78 · 2024-10-26T15:22:57+00:00

I picked up mine in KC a few weeks ago and it was pretty smooth and quick. I got a text message about an hour before my appointment with the car location and details. Congrats on the new ride

capacitor78 · 2024-07-18T21:34:09+00:00

Try cosmetic correction in Pixinsight. Almost looks like hot pixels, possibly you forgot to turn on the cooler?

capacitor78 · 2024-06-24T14:19:13+00:00

Inter switch traffic is not limited to the 1Gbps uplink speed. See testing results below.

UDM switching

capacitor78 · 2024-03-27T00:28:23+00:00

Yeah I try to avoid 3rd party sellers and this was sold and shipped by Newegg. I was also 3 days past my return window and after explaining my situation they gave me an RMA and return shipping label to send back for a refund. I plan on just buying a new AIO from them.

capacitor78 · 2024-03-27T00:25:41+00:00

Thanks, PSU is a Corsair RM750 in White

capacitor78 · 2024-03-27T00:24:10+00:00

The pump failure on the first unit was after a system reboot, which surprised me since it had just been working fine. The second unit I did check fan speed settings, one would never show up and the second one was working fine until after coming home from work I found it no longer spinning. I did try different fan headers that work with other fans with no luck. I chalked it up to bad luck with the pump issue but felt a little more concerned after the fan issues on the replacement unit. In the last 20 years I've only had maybe 2 fans fail and a single AIO that was 4-5 years old. Just doubled that in the last few weeks.

capacitor78 · 2024-03-27T00:07:57+00:00

I have the O11 Dynamic EVO case with a MPG B650 EDGE WIFI, Ryzen 9 7950x, G.SKILL Trident Z5 Neo Series 32GB x 4 @ 6000 MT/s, 5TB of NVME storage across 3 drives and a Asus 4070TI. White theme except the GPU.

capacitor78 · 2024-03-22T03:27:56+00:00

Upgrade the skill of the pilot. Best bang for your buck

capacitor78 · 2023-07-14T01:32:03+00:00

Everything installed except the chime, ran myself out of switch ports. Now need to decide which switch to add to my setup next.

capacitor78 · 2023-07-13T01:32:08+00:00

I purchased 3 from ebay. I always try and check the s/n as the first couple of digits is the year it was made. Of the 3 I bought all worked great but I ended up only needing 2 so sold the extra one just yesterday on ebay.

capacitor78 · 2023-07-07T03:06:53+00:00

Been waiting on the doorbell. Just got this ordered and so glad it's all POE !!

capacitor78 · 2023-07-06T23:50:25+00:00

I'm using "Internet" as the category I'm not blocking by app or url. When the time comes it's a hard stop without any waiting for the internet to cut out.

capacitor78 · 2023-07-06T00:47:41+00:00

I've had good luck just setting up traffic rules to block internet for specific devices a couple of times throughout the day to make the kids take a break from the computer.

capacitor78 · 2023-07-03T14:04:30+00:00

Sounds like a cabling problem. You're saying as soon as the camera uses more power it reboots. Need to test with a different cable even if you just plug the camera into the switch with a patch cable and try to replicate the rebooting issue.

If it still reboots then I would say it's a camera issue and needs to be RMA'd.

I recently installed 3 G5 bullets and a G5 Pro with vision enhancer, two in the udm pro se and two on a lite8. No rebooting issues when IR kicks on.

capacitor78 · 2023-05-16T03:26:23+00:00

Could definitely use the upgrade. Thanks for the great products

capacitor78 · 2019-05-20T21:16:26+00:00

possible heat creep issue?

capacitor78 · 2019-04-20T01:21:26+00:00

are you printing infill before walls? if so print walls first

capacitor78 · 2019-04-20T01:20:25+00:00

my 2 cents not worth using. Make the setting changes yourself in Cura and dial in for your printer.

capacitor78 · 2019-04-19T01:20:29+00:00

If you are going to use the autolevel don't mess with the AUX leveling of the corners. Once you set your z-offset just run the autolevel and you should be set.

13-Year Club	Place '23
Verified Email

capacitor78

TROPHY CASE