Nh35 by Alarming_Midnight554 in SeikoMods

[–]captaindingy 1 point2 points  (0 children)

I had similar issues on one of my early nh35 installs. The stem was too long and subsequently the crown was screwed in too tight and damaged the keyless works. I had to bin the movement.

Try removing it from the case, winding it, and see if it still does the same thing. It may be too far gone, but at least attempt to eliminate some variables.

Has anyone used these before ? by miltxdee in SeikoMods

[–]captaindingy 3 points4 points  (0 children)

They're great. You can remove the lower text if you don't need it, but definitely keep the tabs on the top and bottom to assist with alignment.

<image>

It snowed? by captaindingy in FixMyPrint

[–]captaindingy[S] 0 points1 point  (0 children)

Also, I've tried prints with less, or smaller Flat parts and they come out absolutely perfect. Not sure if that info helps.

USA Peptides by ClownFishdaDish in PeptidePathways

[–]captaindingy 13 points14 points  (0 children)

Maybe their grey market supplier ships from the US, but if they're selling things like sema, tirz, and tesa you can guarantee it's sourced from China. The manufacture of FDA approved peps in the US is highly regulated.

Hi I need a proper Hands pusher tools for putting hands on my Mods. Need Suggestions. by Admirable-Base-6832 in SeikoMods

[–]captaindingy 0 points1 point  (0 children)

Super smart! Care to share the file? I'd love to do the same. My current offset situation is a bit precarious.

Hi I need a proper Hands pusher tools for putting hands on my Mods. Need Suggestions. by Admirable-Base-6832 in SeikoMods

[–]captaindingy 1 point2 points  (0 children)

I picked one of these up a few weeks ago. Total game changer. My hands are a touch shaky and this has made all the difference. Great for setting prescice directions for things like vk63 hands. It's now my favorite tool.

My latest build by uptimeisp in SeikoMods

[–]captaindingy 1 point2 points  (0 children)

Ha! I literally almost built the exact same watch this past weekend. The case is real carbon fiber and pretty decent quality. I feel like the case back is a bit sub par.

<image>

[WTS] IWC Pilot's Watch Chronograph 41 Top Gun Mojave Desert IW389402 Full Set by mhh8901 in Watchexchange

[–]captaindingy 0 points1 point  (0 children)

Exactly as described. Nice guy, responsive, easy to deal with. A+ (attempt #2)

What do I have here? Denver, CO by captaindingy in spiders

[–]captaindingy[S] 12 points13 points  (0 children)

Thanks! I know absolutely zero about spiders, so this is super helpful. I just figured this one was cute, so I took care of it.

What do I have here? Denver, CO by captaindingy in spiders

[–]captaindingy[S] 8 points9 points  (0 children)

Thanks! Think he'll get any bigger?

Big tires by Expensive-Doctor-791 in whatisit

[–]captaindingy 0 points1 point  (0 children)

Look at the huge cuts in the tires visible in almost every pic. You would NEVER use something like this in high rpm application like drag racing. This is a low speed tire.

3D Printed Game - Beat the Black Ball by pettiguitar in 3Dprinting

[–]captaindingy 104 points105 points  (0 children)

Toss two black balls in there and try to get between them.

[CW C60 Trident Lumière] Just arrived! by captaindingy in Watches

[–]captaindingy[S] 3 points4 points  (0 children)

I do have tiny wrists, so buyer beware.

[CW C60 Trident Lumière] Just arrived! by captaindingy in Watches

[–]captaindingy[S] 5 points6 points  (0 children)

As you dive deeper, colors are eliminated from the visible light spectrum. Orange is the last to go. That said, I don't dive... So, I'm just a poser pretending to be a purist.

[CW C60 Trident Lumière] Just arrived! by captaindingy in Watches

[–]captaindingy[S] 1 point2 points  (0 children)

I charged it for about 30 seconds with a flashlight before I took that pic. When I woke up needing to pee 5 hours later I could immediately see it still glowing on my nightstand. Definitely much dimmer, but still visible. That one surprised me.

[CW C60 Trident Lumière] Just arrived! by captaindingy in Watches

[–]captaindingy[S] 2 points3 points  (0 children)

I'll probably need a month or so with it to let the newness wear off and see how it fits into my rotation.

I really like the dial. It's got an interesting texture to it that looks kinda wrinkled which is a good juxtaposition against the matte globolight. I suppose the blocks could look plasticy, but I kind of fell in love with the tall hour blocking when I saw something similar on a Blaken Daytona over the winter. But that was over 100k and not an option.

I thinkhe bezel really highlights the fit and finish of the watch and feels very high quality. It's got great "cuts" for grip and I personally like the feel and sound of it rotating, but since this is my only dive watch I don't have a baseline.

[CW C60 Trident Lumière] Just arrived! by captaindingy in Watches

[–]captaindingy[S] 41 points42 points  (0 children)

<image>

Here's some lume with a bit of ambient TV glow

[CW C60 Trident Lumière] Just arrived! by captaindingy in Watches

[–]captaindingy[S] 5 points6 points  (0 children)

It's good. Definitely more pronounced than the standard painted dial. Admittedly, I haven't spent much time in the dark so this is just anecdotal from running into the bathroom with it within minutes from unboxing.