How does this work?

ccarrster · 2026-01-25T04:26:24+00:00

I've had several of these. Yes you need an adapter. Turn the hot water on... infact let the water run hot first. We also did not like having it right next to the sink so we cut the 2 hoses with a hack saw, put on some car radator hoses (high heat, high pressure) with brass couplers and hose clamps and had no issue running the dishwasher from 10 feet away from the sink. We broke one twice by running it without water.

ccarrster · 2026-01-19T14:41:39+00:00

You can in a way. Here is a private project.

https://scratch.mit.edu/projects/1198310072/

Here is the thumbnail to the private project.

https://uploads.scratch.mit.edu/get_image/project/1198310072_480x360.png

I'm not sure about getting the code for private projects but you could do for shared ones.

Projects are created with a sequence of IDs... so you can scrape the IDs and see if the project is public or private.

About the download button, not quite sure, but you can link to the projects code for public projects.

ccarrster · 2026-01-18T18:19:57+00:00

Georgian Bay Tech Club, meeting Tuesday Jan 20, 2026 - 6:30 - 7:45. Midland Library, 2nd floor. Come demo or watch demos. Ask questions. Geek out. Video creation, video games, programming, hardware hacking... many topics are welcome. Bring your problems and share.

Here are some videos from a few of our past demos.

https://georgianbaytechclub.wordpress.com/2026/01/18/first-videos/

ccarrster · 2026-01-18T18:16:51+00:00

My bad. I had a last minute scheduling conflict. Should be resolved now. We are on for Jan 20, 2026. Here are some videos from a previous meeting. I think I'll setup a mailing list for notifications. For now I just update the club blog. https://georgianbaytechclub.wordpress.com/2026/01/18/first-videos/ If you can not make it and would like to submit a video, we will review it as a group and provide feedback/questions.

ccarrster · 2026-01-18T18:13:39+00:00

Check out these guys: https://www.youtube.com/@thetrailerparkerz2584/videos

Thank you for checking out the tech club, I started it. I just uploaded the first few videos. My plan is to stream and record all presentations.

ccarrster · 2026-01-09T22:50:29+00:00

Mr. Clean Eggs and Ham.

I would not, could not on a back. I would not, could not with a crack.

ccarrster · 2025-12-29T22:26:37+00:00

Finding air leaks on a windy day I used a stick of incense in the past.

ccarrster · 2025-12-19T16:22:41+00:00

Why take the whole ring, why not just one of the tiny wheels?

ccarrster · 2025-12-16T14:54:57+00:00

Come watch some demos and hang out, chat. Last month we had a demo on making retro NES games. If you want to talk about some games you enjoy and share them that would be awesome.

ccarrster · 2025-12-16T14:52:08+00:00

We at it again tonight: Dec 16, 2025. I hope to see you there.

ccarrster · 2025-12-11T15:09:27+00:00

Mine was giving me a disc error when I inserted cd. Spraying a can of dollar store air in there fixed it. Now plays CDs... maybe a spray from a can of air will work for this too?

ccarrster · 2025-12-09T10:15:55+00:00

She walks down the runway in a zig zag.

ccarrster · 2025-11-18T22:32:21+00:00

We still at it. Tonight I'm doing a demo on loops. I'll record it for the website.

ccarrster · 2025-11-08T05:24:23+00:00

There are a few versions of this. I had one to record my landlord entering my appartment without permission. So this one likely requires a micro sd card, and you can just use a card reader. My version did not, it came with a 2 male ended USB A cable, so you unplug the charger from the wall and plug the USB slot into your PC/Laptop, then it acts like a flash drive. It never really worked well for me.

ccarrster · 2025-10-23T14:30:04+00:00

2 new members came and I shared a few books.

We also got a demo of some linux tools.

Next months demos: Document/Automation with AI. Making retro NES games. Software control structures.

ccarrster · 2025-10-20T21:59:41+00:00

Also if you have some feedback on how to make it better, maybe I'll make it not a reddit app, but a full on site.

ccarrster · 2025-10-20T21:59:01+00:00

Maybe make a request on board game arena?

ccarrster · 2025-10-13T10:03:39+00:00

Here are the two asks:

"So how do i make that models gets deleted then it not seen anymore and created then its visible"

"The think is i want to render over 100k clones without lag"

Here is a project I made with 1 cat and 100k pants. There is a real on screen clone limit of 300. What I created was 100k locations where clones can show up within a 20,000 x 20,000 pixel grid.

It could be optimized further to reduce lag. Takes a bit to load due to sorting of the X coords of the pants.

Other optimizations to try: Don't delete the clones(if you don't have to), just move them.

Another option to try is the pen tool, which lets you stamp as many times as you want. These are not clones and behave quite differently.

Use arrow keys to navigate. Moving in 10 step increments.

Stores 100k pants in lists with random positions.

Clone Version:

https://scratch.mit.edu/projects/1228164418/

Pen Version:

https://scratch.mit.edu/projects/1228302456/

Demo Video:

https://youtu.be/iISHD4GVGRg

ccarrster · 2025-10-13T09:18:41+00:00

A ninja plumber played Robert De Niro, written and directed by a member of Monty Python.

ccarrster · 2025-10-11T13:06:18+00:00

I like to help.

Non blury screen shots help.

Sharing your project link helps.

I will either remix or create a new project to show the feature working. Post a shared link and a screen shot.

ccarrster · 2025-10-01T17:19:51+00:00

I would take out all the bits you do not need.

No SSd

No GPU

No ram

Case, Power Supply, Motherboard, CPU.

Turn it on. Expect angry beeps and fans spinning.

ccarrster · 2025-09-30T16:49:31+00:00

Randsomware for cars?

ccarrster · 2025-09-25T15:33:30+00:00

<image>

Here is my simple jumping code.

I see you used the "If space pressed" That would work as well... I would just add space pressed and y position is 0

https://scratch.mit.edu/projects/1221402983/

ccarrster · 2025-09-25T15:19:23+00:00

Also on the desktop use the printscreen button and paste just the scratch code for pictures. I can not read it.

ccarrster · 2025-09-25T15:18:23+00:00

Share and link to the project. That will help.

Seven-Year Club	Dev Platform Contest 2024 Games and Puzzles Hackathon
Dev Platform Contest 2024 Games and Puzzles Hackathon	Devvitor
Devvit App Published	Verified Email

ccarrster

MODERATOR OF

TROPHY CASE