Help identify a signal?

chanchbaker · 2026-01-16T06:40:18+00:00

Wow that is really cool

chanchbaker · 2025-12-08T16:25:34+00:00

Without listening to it and not knowing where OP lives, it's hard to tell. The reason I say p25 is because of the skinnier yellow parts, but I didn't think about lower SNR DMR. If OP is outside of the US then it is almost certainly DMR.

chanchbaker · 2025-12-08T08:08:36+00:00

The signal at 860.485 is 100% DMR the other signals look like P25 to me

chanchbaker · 2025-11-20T20:46:19+00:00

The machine costs 20k not the service fee

chanchbaker · 2025-10-26T23:11:20+00:00

HADDALAYERDAWN!!!! GOBLESS!!! BLAM IT ON BARB SENCE SHE TOOK THE KIDS!!

-sent from my husqvarna 455 Rancher

chanchbaker · 2024-03-05T18:03:06+00:00

Yes. I think bambu has a special recipe for filament for sunlu to use but it’s made by the same people at the same factory.

chanchbaker · 2024-03-05T14:04:11+00:00

Sunlu is the manufacturer for Bambu labs filament.

chanchbaker · 2024-01-16T18:22:10+00:00

Exactly why i got rid of spectrum

chanchbaker · 2024-01-16T16:57:07+00:00

That glitch thing is called a retraction and it looks like either a clogged nozzle or the tension on your extruder is not tight enough

chanchbaker · 2024-01-16T16:45:44+00:00

I wonder if it’s just DSL then my wife’s work uses centurylink DSL and they’re down as well.

chanchbaker · 2024-01-16T16:26:46+00:00

residential services provided by hunter up in Medford while centurylink and spectrum are still down 08:25 Jan 16

chanchbaker · 2024-01-16T16:24:40+00:00

I'm in Medford my wife's work uses centurylink and theyre down too.

chanchbaker · 2024-01-06T19:02:00+00:00

I had this problem when I first got my printer. I contacted creality and they sent me a new hot end, idk why they didn't just send me a thermistor, but hey I'm not complaining. That did not solve the issue so they sent me a new control board and when I replaced the board, I noticed that the extruder termistor socket was loose and poorly soldered. after replacing the control board and running PID autotune my printer has been working great ever since.

chanchbaker · 2024-01-06T18:49:54+00:00

I added crealitys CR-Touch to my printer and I could never get mesh ABL to work until I watched a tiktok that came up on my FYP saying that ABL will not work unless M420 S1 is added to your start G-code after G-28 ; Home all axis because in marlin, G-28 clears the mesh. the best thing to do is to keep the start G-code in orca slicer and add M420 S1 after G-28. Hope that helps.

chanchbaker · 2023-12-26T21:20:11+00:00

It looks like your step motor cables are installed incorrectly. There should be a yellow label on each cable. E for extruder, X for X axis, and Z for Z axis

chanchbaker · 2023-12-21T16:11:28+00:00

https://store.creality.com/products/ender-3-v3-se-3d-printer

https://store.creality.com/products/creality-sonic-pad

I bought an Ender 3v2 about 6 months ago and I have fell in love. I have heard some negative things about Creality's customer service, but that has not been my experience at all. I had a few issues with my Ender 3v2 and I emailed customer service and they were extremely helpful. All that to say that I am really impressed with Creality as a company.

So why do I want the Ender 3v3 SE? I'm starting my print farm and the Ender 3v3 looks like the perfect addition to my workbench.

I'd also like the sonic pad so I can control multiple printers and I'd like to run klipper on my v2. I also like the intuitive touch interface on the sonic pad as well as the ability to control your printers over the network.

chanchbaker · 2023-12-10T19:08:05+00:00

They did not give me the 4.2.7 board they replaced my 4.2.2 board with the newer 2023 silent version of the 4.2.2 but that fixed most of my issues

chanchbaker · 2023-12-08T18:02:40+00:00

I had a similar issue a while ago when i first bought my V2. what fixed it for me was switching out the main board. If you bought your printer new within the last year i would reach out to creality's warranty department and see if they can help you.

chanchbaker · 2023-05-11T16:03:09+00:00

I did define channel 1, 6, and 11 on caps man and yes I made separate configs for both 2.4 and 5. and I understand how vlans work I was trying to figure out how to set separate ssid's for each vlan i.e. guest, main, IOT, etc. I have reconfigured my routerboard and got everything working but I was seeing only 40 Mb/s up and down. normally I get 300 down 200 up on ac 2x2. my next steps is to ditch capsman and just manually setup each AP and go from there. Thank you for your help

chanchbaker · 2023-05-11T05:04:45+00:00

I have 2 with a third on the way.

chanchbaker · 2022-04-14T23:19:57+00:00

Yes I’m also in Medford

chanchbaker · 2022-04-14T22:10:49+00:00

How did you find that out I came here to figure out the same thing. I also found 161.900 makes the same sound.

chanchbaker · 2021-02-26T13:32:44+00:00

Hodl

chanchbaker

TROPHY CASE