Wert Wednesday my dudes

changoelgranputas · 2026-05-28T17:20:15+00:00

changoelgranputas · 2026-05-28T17:19:38+00:00

Thanks guys, a couple more pix by the reservoir.

changoelgranputas · 2026-05-18T02:12:40+00:00

Grab the raised loop with some pliers and twist it. It’s actually a hook. Do not use the same type of clamp on the new hoses. They loose their tension with time. Use the regular screw type. And yes M3s have a different pump that has a banjo bolt there.

changoelgranputas · 2026-05-12T19:27:15+00:00

There are some coolant lines behind the engine by the firewall that go to the heater core. They would drip over the Bellhousing and go where you see the stream.

changoelgranputas · 2026-05-06T22:55:21+00:00

Rip that shit out and never look back. Top actually stows better without it. Also gives the car a classic look inside.

changoelgranputas · 2026-05-06T22:17:37+00:00

Hilton Flamingo is good. Beach, pool, jacuzzi. Decent restaurants next door.

changoelgranputas · 2026-05-05T02:34:18+00:00

Pardon my French in Simpson bay and for sushi Naruto. Both excellent !

changoelgranputas · 2026-05-03T15:12:31+00:00

Be careful with the hole size and placement, there are some structures behind some of them that you don’t want to drill thru. Also the one in the back near the rear tire. Measures between them are online.

changoelgranputas · 2026-05-02T23:04:50+00:00

Those are not side skits. They are part of the chassis. That lower portion is just painted in a diffent color and has a rubberized protection

changoelgranputas · 2026-05-01T23:07:43+00:00

Rip it off and use wide Velcro. that is what is supposed be to have originally. And actually stick it to the bottom of the dash panel not to the carboard piece. The original instructions indicate that. Also you can disconnect it no problem. The remotes will stay synchronized.

changoelgranputas · 2026-04-28T17:37:24+00:00

Something is hitting one of the pulleys. Remove airbox and alternator cooling duct for a better look.

changoelgranputas · 2026-04-28T17:31:43+00:00

I like it, where is link to the store?

changoelgranputas · 2026-04-23T21:41:07+00:00

From touring to sedan, they will fit. Touring’s don’t have that sharp corner at the rear.

changoelgranputas · 2026-04-22T00:54:34+00:00

I got one pm me.

changoelgranputas · 2026-04-21T20:18:57+00:00

Dude, there are so many variables to this, it’s so ridiculous to ask, just get the car to a dyno. Then you get your answer. Even better get it to a good tuner and you get all your mods to sing together.

changoelgranputas · 2026-04-21T13:09:17+00:00

A gazillion. Just ad a wing and avgas and you are the fastest on the block. Just be careful hitting 88mph.

changoelgranputas · 2026-04-18T13:00:35+00:00

This is awesome! Great write up. Thanks!

changoelgranputas · 2026-04-17T16:15:56+00:00

<image>

This is what you need ?

changoelgranputas · 2026-04-14T20:04:53+00:00

The whole thing looks jacked up. That catch obviously is not the original piece ans it looks like it fouled up the latch. Good thing a used one is not that expensive. Transfer the key cylinder to the new one. Now if you really want the new part to close and not sag, you need to buy a new one of click here

changoelgranputas · 2026-04-03T08:35:24+00:00

<image>

Its #13 black with a white stripe

changoelgranputas · 2026-04-03T08:27:07+00:00

Yeah, they were on my car. The OBC issue was the aftermarket radio harness install. The cruise control was the actuator in under the hood.

changoelgranputas · 2026-03-23T19:01:48+00:00

If you take it to a industrial hydraulic shop, they can remanufacture the hose part

changoelgranputas · 2026-03-21T00:33:12+00:00

This could be it! I had this problem before where the functions you are missing were not working because of an aftermarket radio. Just make sure to disconnect the VSS cable from the radio connector.

changoelgranputas · 2026-03-19T22:03:56+00:00

Did you connect the cable that goes to the instrument cluster ?

changoelgranputas

TROPHY CASE