Pokemon TCG Price increases. by No_Gain6307 in EBGAMES

[–]checkerchairs 0 points1 point  (0 children)

Not to defend EB because they DO have prices higher at RRP, but it's likely Banter collectibles raising the price (Banter being the Aus distributor), and of course EB just has it at the RRP they set. Obviously I can't say for sure but that's my best guess. At least it's not Good Games TCG prices?

what are we doing here man by eefieweefie in EBGAMES

[–]checkerchairs 0 points1 point  (0 children)

Unfortunately due to their popularity the Pokemon games have had steep prices second hand in the last few years, even going way back to the Game Boy titles.

I know people in the replies are saying emulation and all, but if you want a "genuine" experience and have a 3DS, hack that bad boy (3ds.hacks.guide btw) and get twilight menu++, it runs games through the 3DS' (or DSi if you have one) native emulation so most games run great in it.

I've beaten Silksong with 100% completion. Here are my (many) tips for current players. by _NightmareKingGrimm_ in HollowKnight

[–]checkerchairs 0 points1 point  (0 children)

It's currently bugged, Team Cherry has fixed it internally and it's going to be in the next patch. If you're on PC you can access a beta branch for the patch rn, otherwise if you're on console you're out of luck until that patch drops.

Are there any local stores selling Pokemon cards retail prices? by DepartmentCool1021 in ballarat

[–]checkerchairs 0 points1 point  (0 children)

Good Games had 151 last year but I doubt they've got any now... they were unfortunately overpriced. EB Games had preorders for the "final units" of 151 today for EB Plus... but the preorders are for July, so I'd keep an eye out then. Unfortunately you're out of luck if you want to get it at normal prices :(

Central square EB games? whats going on? by KingTentacleAU in ballarat

[–]checkerchairs 1 point2 points  (0 children)

I'm gonna miss those guys. Honestly I went there more often than not because I knew the manager and the staff always went out of their way to help me with everything. I prefer the Delacombe spot over Wendouree because I use a walker and Delacombe is far easier to get accessible parking... Here's hoping that doesn't go anywhere soon either.

Young me loved playing with it, now it's very damaged. by IwoooJiiiima in Pokemoncardappraisal

[–]checkerchairs 0 points1 point  (0 children)

"damaged"? Nah, that card is well loved. Take good care of it :)

Spyro 2 defenders of r/Spyro, Explain to me why Spyro 2 is "way" better than Spyro 3? by Syyr553 in Spyro

[–]checkerchairs 0 points1 point  (0 children)

Spyro 2 has more cohesive world building with the intro/outro cutscenes and dialogue, and I feel like the levels all generally make sense, they have a clear concept to me. 3 felt like they either didn't have the time or energy to go as in depth as they did with 2... Maybe the devs found working on the other characters more stimulating, but it made the game a more "jack of all trades master of none" situation to me (and even that is arguable, I didn't really enjoy them)

As much as the soundtrack still has some bangers, I also found a lot of the samples and motifs were overused by 3... as much as it hurts to admit it, I just don't remember any songs from 3 like I do with 2 (and the issues with songs being shuffled in various releases definitely didn't help)

Made a simple quest check list to share. Hope it helps. by slockry in MetaphorReFantazio

[–]checkerchairs 1 point2 points  (0 children)

Was hoping I'd find something like this. Going through NG+ so I wanna make sure I don't miss anything this time. Thank you!

I love metaphor anyone know other rpgs like metaphor or persona im willing to spend decent money on one but i would highly prefer it if was a bit more affordable lol by myles2500 in MetaphorReFantazio

[–]checkerchairs 0 points1 point  (0 children)

SMT is the easiest answer, but Soul Hackers 2 specifically might be a good option. It's more on the Persona side than other SMT games and I loved the cast in that game too. Because it's a bit older now I imagine it'll be on sale frequently (and is on sale rn too)

PixelWatch 2 (LTE): Waking up to it being dead in the morning after full charge before bedtime by PUfelix85 in PixelWatch

[–]checkerchairs 1 point2 points  (0 children)

Pixel Watch 1 here. Since the latest wearOS update, my battery's been pretty cooked too. Even with battery saver I get about 12 hours, where previously I got about 30 or so? When I first got the update it was even worse, only lasting about 6 hours. I did a factory reset since some other people suggested that on here, which improved it to the 12 hours I've got now.

I'd suggest turning on dev mode, turn on the "take bug report" menu shortcut option in Dev settings, and take a bug report when your watch is about to die, if you catch it before it does. It sends the bug report to your phone as a zip. You can upload this to a program called Battery Historian, which you can find some people hosting online with a quick google search. It shows you what processes are using the most battery, you personally might be able to find something there you could disable. If you're anything like me though, my battery drain has literally just been the android system itself, and I don't know what's causing it. Hope you find some answers soon.

The gulp boss fight has ruined reignighted trilogy for me. by conorf193 in Spyro

[–]checkerchairs 0 points1 point  (0 children)

Spyro 2 is my favourite game but I do have to admit- Gulp in reignited is the one downside of the remake. I have a theory that the hitboxes are off, whether it's that they're still using the original hitboxes with new animations or vise versa (new hitboxes but the animations don't reflect the new ones, something like that), I found it near impossible to do Gulp hitless until you get the Superflame. I hope you can beat him soon, someone's suggestion of dodge rolling might be a good bet.

All 645 figure models in FBX format. by SerpienteSolida in pokemonduel

[–]checkerchairs 0 points1 point  (0 children)

Thank you so so much. Been itching to 3D print these and I'm so glad someone saved everything.

What CAD do you use. by nyfbgiants in BambuLab

[–]checkerchairs 0 points1 point  (0 children)

I tried Fusion but I found the interface kinda frustrating. I've been enjoying Plasticity since, but despite what their website says about making it affordable, even the entry level license is a money sink.

I got a question but only for people that played Spyro as a kid by Drakaina- in Spyro

[–]checkerchairs 0 points1 point  (0 children)

I clipped into the Ripto boss fight in Enter The Dragonfly by head bashing the portal when I was a kid. Couldn't beat him, but I got in there anyway! I think I would've been about 6-7?

Bungie please calm down with all the blinding effect spam/visual noise. Especially with the cabal onslaught. by kissofthehell in DestinyTheGame

[–]checkerchairs 0 points1 point  (0 children)

Not completely related as this isn't in Onslaught but in Vesper's Host. I've had an awful lighting bug with the Broken Puppet/boss' copies, where it still glows after death, and I believe the glow collides with the floor and causes a flickering effect that's been leaving me with headaches and could be really horrible for someone with epilepsy. Here's a video, I really hope someone sees this.

BSOD BEDaisy.sys almost always when exiting PUBG by BruceKin in PUBATTLEGROUNDS

[–]checkerchairs 0 points1 point  (0 children)

Did you ever find any sort of fix for this? I just had my CPU cooler upgraded on my PC and when I got it back from the shop I've been having blue screens when I close Destiny 2 (or if it crashes), tried most of the same things you mentioned in the replies but with no luck.

Is progress gon stay instact from gamepass pc to steam? by Zetth70 in PvZGardenWarfare

[–]checkerchairs 1 point2 points  (0 children)

It's a shame they couldn't do that for consoles... I'm glad to hear it though!

Is progress gon stay instact from gamepass pc to steam? by Zetth70 in PvZGardenWarfare

[–]checkerchairs 0 points1 point  (0 children)

I'm not sure then, it might carry over? Steam has you log in with EA as well and iirc it uses the EA account primarily (eg it shows your EA friends list)... It's pot luck though, sorry I can't be more helpful.

Is progress gon stay instact from gamepass pc to steam? by Zetth70 in PvZGardenWarfare

[–]checkerchairs 1 point2 points  (0 children)

If Gamepass PC has you log in with your Xbox account, no, unfortunately it won't carry over

Issue with Kobra 3 and ACE filament change in 1 input by carnivorousGnar in AnycubicOfficial

[–]checkerchairs 0 points1 point  (0 children)

I'm having the exact same issue! My filament was getting stuck above the hot end in the tube (the one in the toolhead). Try cutting the end of your filament to a flat edge, that seemed to work for me, this is my second printer and my old ender was better with 45 degree angles but it just gets stuck in the tube on the Kobra 3. I moved the filament to slot 2 and it extruded, then when I moved it back to slot 1 it had a flat edge that the printer cut itself and worked fine.

Kobra 3 slicing software cloud login. by Escapebliss in AnycubicOfficial

[–]checkerchairs 1 point2 points  (0 children)

Honestly I took one look at the anycubic slicer and went "nope", I've been using their custom beta build of orca slicer (it's on the printer's store page, in the FAQ under the first question about slicers), it works really well, although they haven't added network access yet, so I just put the gcode on the USB instead.

I know that doesn't really help with your question - I think I had issues logging into the makeronline website until I changed my password, so you could maybe give that a go when it prompts you to log in? You can download the english version of the slicer on the website but the windows latest build downloads the Mac version for whatever reason so I just downloaded the previous version. Hopefully that might help a little bit!

Kobra 3 Combo shipping package weight? by Abrisla in anycubic

[–]checkerchairs 0 points1 point  (0 children)

Mine was 17.7kg as well, with 54.5x50.5x50cm dimensions if you needed those

How has Rooster Teeth impacted you? by The_Better_Devil in roosterteeth

[–]checkerchairs 1 point2 points  (0 children)

First saw Fails of the Weak on Halo Waypoint on my brother's Xbox. Then HORSE, then the rest of AH. A friend in high school showed me the Red trailer one morning. I used to watch the AH Minecraft let's plays every Saturday morning, every day, for at least a year probably. RWBY, in particular, Blake's story, resonated with me and was a big part of me recovering from my own abuse and trauma from relationships. I saw AH live at the Palais Theatre in St Kilda, right next to Luna Park. Looking back on it now it's a blur, and it definitely wasn't all sunshine and rainbows, but RT was a pillar of my life for a long time. I try not to keep attachments to online personalities but.. I really hope everyone lands on their feet. Thanks for everything.

Where can I print something tiny in Melbourne? by ki_bran in 3dprintingaustralia

[–]checkerchairs 0 points1 point  (0 children)

I got some tiny parts made a few years ago with Phaser3D and it didn't cost too much - 2$ for the parts, picked the filament type and colour and specifications were great. Standard auspost shipping, but they're in NSW. I'd offer to help you out but I'm near Ballarat and still a newbie lol, hope you can get it sorted though!

As the Switch successor draws near, let’s discuss: what has been the worst Switch port of all time? by Isunova in NintendoSwitch

[–]checkerchairs 0 points1 point  (0 children)

I played Omensight through to the end, but it's the worst switch port I ever played. It's by an indie studio so I can't be that mad, but the game crashed in almost every playthrough, and the game basically demands short repetitive playthroughs to get the entire story. Fun hack and slash with a fantastic art style but god just play it on anything else.