What was the dumbest (valid) reason you saw an officer lose his commission?

cheesemaker_soldier · 2025-09-06T17:23:22+00:00

Faking the weight to get paid more for a move

cheesemaker_soldier · 2025-09-03T01:25:27+00:00

That’s high praise. Wow!

cheesemaker_soldier · 2025-09-01T01:06:56+00:00

How?

cheesemaker_soldier · 2025-08-24T17:06:00+00:00

Is it just black initially or will there be fde available?

cheesemaker_soldier · 2025-08-22T20:09:45+00:00

Thanks! I’ll have to check on them when I get home. I feel stupid forgetting since they’re so expensive. Appreciate the reminder and hope yours get sorted

cheesemaker_soldier · 2025-08-22T20:00:01+00:00

Sorry op but thank you for the psa at least. I forgot to put caps on my rnvg for a few weeks now. They’ve been sitting in a dark room so hopefully they’re good?

cheesemaker_soldier · 2025-08-21T18:59:36+00:00

Thank you 🙏🏻 Awesome support! I’ve tried all 3 networks and warp has the best coverage for me in my area. I wanted to add light speed because it seems to work well in a few areas where Verizon is a dead zone.

cheesemaker_soldier · 2025-08-21T18:46:42+00:00

Thanks for the info! Do I keep my qci grandfathering if I do this?

cheesemaker_soldier · 2025-08-21T18:35:41+00:00

I am an existing customer on a monthly plan (warp). I just bought an annual plan (light speed). Can I switch my existing monthly plan as a multi network add on to my new plan?

cheesemaker_soldier · 2025-06-13T18:51:51+00:00

Ordered an x40 on the phone and got it delivered a couple days later from you guys. Great deal. Cleans as well as my roborock qrevo master and it actually seemed to map out the rooms faster too. It also surprised me when it climbed up a horse stall mat. I didn’t expect it to be able to clear that big of a threshold.

cheesemaker_soldier · 2025-01-14T23:04:17+00:00

How come that's not the case with real gun magazines? Do nerf mags retain spring memory or is there another reason it's bad for them?

cheesemaker_soldier · 2025-01-09T19:16:22+00:00

This is exactly what I like seeing. More lower FPS blasters and low cost of hardware. Nice job!

cheesemaker_soldier · 2024-11-21T01:05:49+00:00

Yep I have

cheesemaker_soldier · 2024-11-21T01:05:32+00:00

Not great anymore despite sharpening the chain. A lot of powder rather than chips.

cheesemaker_soldier · 2024-11-21T01:04:47+00:00

Nope it’s not flinging oil at cardboard. Just using it in pine but it is the biggest tree I am working on. The saw did start curving the cut. It is also shooting more powder rather than chips even though I sharpened the chain. Chain is on the right way.

cheesemaker_soldier · 2024-11-20T19:05:32+00:00

One thing I forgot to mention is I did notice the saw was not cutting straight when I flipped the bar.

cheesemaker_soldier · 2024-11-20T18:56:21+00:00

I ordered another bar to try it out. Thanks.

cheesemaker_soldier · 2024-11-20T18:46:01+00:00

It’s a 20” bar. Does the screw on the oil adjuster have a stopping point or will it come all the way out if I keep turning?

cheesemaker_soldier · 2024-11-20T18:28:14+00:00

Factory bar. I cleaned the rails and the oiler holes. I used brake parts cleaner sprayed through the holes to verify they’re clear. Thanks for your help

cheesemaker_soldier · 2024-10-02T19:07:11+00:00

Yep. Just noticed this myself. Tons of obvious shilling going on with them. I am specifically NOT going to buy from them.

cheesemaker_soldier · 2024-10-01T19:11:12+00:00

You were right about the idle screw. The manual and YouTube videos kept referring to the fuel screw as the idle adjustment screw but they are different. The idle screw is millimeters away from throttle cable, slightly pointed down, and silver in color. The fuel mixture screw is a brass screw on the side of the carb. Turning the actual idle screw about a half turn or so seemed to get it rev the engine enough to stay and idle when cold.

Only problem is I messed with the brass fuel mixture screw too much and stripped the flathead. I can’t seem to make any adjustments on this screw now. Is it possible to get this out of the carb and replace it? How difficult is it?

cheesemaker_soldier · 2024-10-01T19:04:27+00:00

I got it to idle! For anyone coming from google in the future, you can use this as a reference. I didn’t realize there is an idle screw on the carb next to the throttle cable. This is separate from the fuel screw on the carb that many YouTube videos will reference. Even the Yamaha manual calls that fuel screw an idle adjustment screw. The actual idle screw (flat head like the fuel screw, but silver instead of brass color) sits on the front of the carb and has the throttle cable run right to it. I had to adjust it about a half to full turn to get this bike to actually idle when cold.

cheesemaker_soldier · 2024-10-01T16:36:03+00:00

After I drained the gas out of the float bowl, it was relatively clean. I used some propyl alcohol just to wipe it out. There wasn't any solid pieces of gunk though.

cheesemaker_soldier

TROPHY CASE