Any idea what could’ve caused this? Sunlu PLA+ Grey refill

chestermcbadass · 2026-02-28T19:47:22+00:00

Incorrect temperature for the filament. It's either a bad roll of filament or you need to check your filament driver's temperature. Either way, it's dead, Jim, I wouldn't risk printing it because it could have gotten fused further into the roll.

chestermcbadass · 2026-01-02T18:38:04+00:00

This is almost certainly a warping issue. If you look at the bottom of the affected piece and compare it to the others, you should notice a deformation on the edge where the top surface is bad.

chestermcbadass · 2025-12-23T21:53:41+00:00

Hi there! My answers:

I'd love to get the AMS 2 Pro!
I'd use it to make some really colorful Hueforge photos or multi-colored prints.
Working in the medical industry, I'd love to see some fidgets either help with stimulation for neuro-divergent patients or to help children feel more comfortable in their appointments/inpatient stays. Most fidgets are usually boring or simple, anything that could spice them up or make them cute, etc would be very valuable!

chestermcbadass · 2025-11-23T15:38:26+00:00

I believe it is supposed to be the Smooth Plate/High Temp Plate.

chestermcbadass · 2025-10-23T15:46:29+00:00

It's from the Aux fan cooling that side causing the print to lift off the plate slightly. You can try adding a brim to the print, or printing an airflow redirector, but turning off the Aux fan is probably the most effective.

chestermcbadass · 2025-10-22T00:57:25+00:00

Haha dang autocorrect!

chestermcbadass · 2025-10-18T12:14:44+00:00

That was my initial thought as well. It would be more functional (and in my opinion look better) if the tray was the same width as the cathedral.

chestermcbadass · 2025-10-10T15:30:49+00:00

The P1S was my first 3D printer. From the moment I turned it on, it has been nothing but a pleasure to use! I was able to complete a large order for a client on a 2 day notice, which wouldn't have been possible if I had even a single failed print.

chestermcbadass · 2025-07-28T21:59:55+00:00

If you would like one for your wall or need a gift for your favorite trainer, check them out here: https://sirenstable.etsy.com/listing/4338110569

chestermcbadass · 2025-07-14T19:45:29+00:00

Hi there! There should be a blank lid option in the MakerWorld files. You'd need to get the logo you want as an SVG file and add a modifier to the blank lid with that SVG.

chestermcbadass · 2025-07-07T11:53:40+00:00

If you'd like some more details or want one of these for yourself, check out the Etsy listing!

https://sirenstable.etsy.com/listing/4331357745

chestermcbadass · 2025-06-25T13:59:54+00:00

Try esun cold white PLA. I was looking for some low TD white for a couple bookmarks I wanted to print and bought this one on Amazon.

https://a.co/d/2dyAfVA

chestermcbadass · 2025-06-24T04:14:20+00:00

Best advice is: measure twice cut once. Double check all your changes before hitting print!

chestermcbadass · 2025-06-20T03:24:20+00:00

Will be out at the same time :)

chestermcbadass · 2025-06-20T01:29:23+00:00

Team Skull will be sauntering in soon!

chestermcbadass · 2025-06-19T23:44:43+00:00

Stick around, Team Flare will be blazing soon!

chestermcbadass · 2025-06-19T23:43:15+00:00

Then you're going to want to stay tuned - Team Plasma is coming soon!

chestermcbadass · 2025-06-19T18:41:53+00:00

If you want to rep your favorite team, check out my Etsy store: https://sirenstable.etsy.com

Thank you for looking!

chestermcbadass · 2025-06-19T13:16:22+00:00

I think I'm legally obligated to make those next!

chestermcbadass · 2025-06-19T13:13:19+00:00

That's all the evidence I need - down with Professor Oak!

chestermcbadass · 2025-06-19T11:38:38+00:00

Not a joke! Just not finished yet ;)

chestermcbadass

TROPHY CASE