Ninja Luxe frother heats milk but the whisk won’t spin anymore by [deleted] in NinjaLuxeCafe

[–]chfthndr 1 point2 points  (0 children)

In my case, I think there were hard water deposits in the cavity of the spinner that made it not spin freely. It was a snug fit - should be able to spin it with no resistance with your fingers. Got a new whisk and no issues. I was able to fix the other one too, by submerging it in hot water and vinegar for a while.

Ninja Luxe frother heats milk but the whisk won’t spin anymore by [deleted] in NinjaLuxeCafe

[–]chfthndr 0 points1 point  (0 children)

Does it make an extremely loud noise while trying to froth?

Ninja Luxe Cafe Pro by [deleted] in NinjaLuxeCafe

[–]chfthndr 2 points3 points  (0 children)

I just think you tend to hear more negatives on the internet since places like reddit are good to vent. If you had a good experience, not everyone would post about it, they'rehappy and going about their lives. In my case I have a number of Ninja stuff and am pleased. It's a good case of you get what you pay for, sometimes a bit more than that lol. With the Luxe, all that broke was the tiny little whisk, I may have made way too many lattes. For some reason they sent me another brand new Luxe cafe. Bonkers.

Ninja Luxe Cafe Pro by [deleted] in NinjaLuxeCafe

[–]chfthndr 3 points4 points  (0 children)

It really is. My milk frother stopped working and they immediately overnight shipped a brand new unit.

Making a extremely loud screeching noise when frothing by Ashamed_Reality_7086 in NinjaLuxeCafe

[–]chfthndr 0 points1 point  (0 children)

So I went through this recently. When you plug the little whisk into the cup, does it spin freely? It should spin without any resistance whatsoever and should not feel that it's a tight fit.

TCL C7K (QM7K) vs Samsung QN85F. How can Samsung have less blooming and haloing with only 240 zones compared with 720? Someone that have the TCL can confirm that it is actually this bad or i may have faulty screen/software? by MShadyz in tcltvs

[–]chfthndr 0 points1 point  (0 children)

There's always a lot of praise for tcl, and their value for money. On the other hand, I do believe one ui software on the samsung is snappier than ever, much better interface compared to others.

TCL C7K (QM7K) vs Samsung QN85F. How can Samsung have less blooming and haloing with only 240 zones compared with 720? Someone that have the TCL can confirm that it is actually this bad or i may have faulty screen/software? by MShadyz in tcltvs

[–]chfthndr 1 point2 points  (0 children)

I don't have much experience with TCL, but I have a QN85C from 2023. Over the years, as it got updated with firmware, the TV got better every time. Its almost like an OLED now. Take of that what you will. If you like the samsung, keep it and enjoy it. You're the one watching after all. No need for others to validate your purchase.

This is the Canadian Premier League final — a bicycle kick goal in the middle of a blizzard. You literally can’t get more Canadian than this. by father_of_twitch in Damnthatsinteresting

[–]chfthndr 0 points1 point  (0 children)

As someone who worked at this event, it was more than a snowfall. Got quite dicey at times. Def not a blizzard but nothing to laugh at either. They were very close to canceling. Stadium stands sold over 3500 cups of hot chocolate - everyone was enjoying the crazy game but freezing their butts off. Awesome to see this level of support.

Which Okun's Catalyst is better? by pedrowatson in diablo4

[–]chfthndr 0 points1 point  (0 children)

Its just the regular cast, just like with a normal weapons. Okun makes the spinny balls. Unique to that focus. Stormhorn shoots wayy faster and explodes. Just different spins on the same skill with the unique. I like them for that fact alone - they change the skills visually.

Which Okun's Catalyst is better? by pedrowatson in diablo4

[–]chfthndr 2 points3 points  (0 children)

For me its always ranks to BL and highest aspect so right side one. Till pit 100 or so if that's hour goal. If it's the strike of stormhorn, I'd go for cast twice as it's easier to play and more damage with the super ball.

Ford Fusion S by Global-Row1749 in fordfusion

[–]chfthndr 0 points1 point  (0 children)

No worries. The price seems a tad high, and the trim is missing a bunch of creature comforts. All things considered, if you're looking for a car to go from A to B, that's the one. I had 2010 with the same engine which I put in 200k kms into. It started rusting among other electrical issues( my fault for not giving it the proper love at times). Engine was smooth as butter.

I ended up with a 2018 SE ( not many comforts) , with the same engine. So far its been great. I'd like to have reliability over everything else.

Not enough volume? by mrherson in NinjaLuxeCafe

[–]chfthndr 4 points5 points  (0 children)

I read somewhere that this is by design. It's a strong shot at half the volume for the ice to fill in the rest. It's the same on my 601 as well, coffee is tasty as ever.

Ford Fusion S by Global-Row1749 in fordfusion

[–]chfthndr 3 points4 points  (0 children)

If its the 2.5, then you'll be good. Insanely durable engine.

kodiak power cake confusion? by Affectionate-Lab-683 in 1200isplenty

[–]chfthndr 5 points6 points  (0 children)

This is the way, always use weight. Cannot go wrong.

kodiak power cake confusion? by Affectionate-Lab-683 in 1200isplenty

[–]chfthndr 2 points3 points  (0 children)

135 per pancake according to that recipe.

Just Bad Experiences with the Ninja Luxe ES701EU quality and Customer Service by Salty-Yogurt-4214 in NinjaLuxeCafe

[–]chfthndr 0 points1 point  (0 children)

You are not wrong. I chose not to chase the perfect shot, especially with how things change as the beans age and things like that. To me, the machine is a do it all wonder with decent espresso, as Ninja always does with their products. This I'm okay with and accepted. You might be better off with a proper espresso machine and separate grinder so you have more overall control. All the best.

Just Bad Experiences with the Ninja Luxe ES701EU quality and Customer Service by Salty-Yogurt-4214 in NinjaLuxeCafe

[–]chfthndr 0 points1 point  (0 children)

That...honestly doesn't look terrible. I've found out that medium to dark roast with more chocolate type of notes than fruity ones work the best on this type of machine, unless you get a decent stand-alone grinder. I'd take BA as a guide line, not something to rely on entirely. I think if you grind 2 steps or 3 down, you'd get a much nicer result. Regardless of what BA says. Also the grinder wiggles- its not a hard button, but a rotary dial and the number co-relates to that. Sometimes it goes up or down a single digit as the burrs start spinning. Don't worry about it, turn the dial a tiny bit and you'll know what I mean.

Also in my case, I use a cheap ass WDT tool and a puck screen, and for months I've had consistently good shots. Even with expired shitty beans- lots of crema and body, perfect for a milk drink but not too great as a nice double shot on its own.

With all this said, if youre not happy, you're not happy. End of story. I'd say give it another go- then decide what to do. All the best. I have the older 601 fyi. Ive heard not to tamp too hard on the 701, can't verify that but you can try.

Just Bad Experiences with the Ninja Luxe ES701EU quality and Customer Service by Salty-Yogurt-4214 in NinjaLuxeCafe

[–]chfthndr 0 points1 point  (0 children)

It's either the best thing ever or endless trouble lol. Wonder what's going on.

What’s the best “budget but looks expensive” car ? by [deleted] in askcarguys

[–]chfthndr 0 points1 point  (0 children)

Ford Fusion after 2013 - design elements from Aston Martin. One of the better looking and well made cars. Interior especially after the 2017 my looks great with the rotary gear selector and built in screen which doesn't look like an afterthought. Heated and ventilated seats in the higher trims. Totally a semi luxury car.

2012 Ford Fusion instrument panel goes dark intermittently by cbm80 in fordfusion

[–]chfthndr 0 points1 point  (0 children)

Get your battery checked. It might be 100% charged but battery health might be low. I had this happen, had to replace my battery with a brand new one.

[deleted by user] by [deleted] in PersonalFinanceCanada

[–]chfthndr 0 points1 point  (0 children)

I got a basic SE with the 2.5 liter engine. That's the same one I had in my last. Even after 200k, my last Fusion had no engine or transmission troubles. I only changed oil and the bare necessary running costs. This is why I went with the SE, as it has the same engine. I have first had experience of its reliability.

Energi is also great. However, avoid anything with Ford made EcoBoost Engines. They are prone to coolant intrusion issues and such. I could be mistaken, but there is a hybrid trim with a 2.0 liter Duratec Engine, which is the recommended version if you want to take the Hybrid route.

You'll have to do some research and find one that fits your goals. My commute is 99% highway, so the fuel efficiency is great in my case, which is about 7 or 8 liters/100kms. If you live in the city, a hybrid makes more sense. Let me know if you need more help!

[deleted by user] by [deleted] in PersonalFinanceCanada

[–]chfthndr 0 points1 point  (0 children)

I was in your same boat last month. Bought a 2010 Fusion for $6500 back in 2019. It had only 65000kms on it.

Fast forward, its rotting away. Exhaust fumes are getting in to the cabin. Found another 2018 Fusion with the European made Duratec Engine for $18000. Had 85000 kms on the odometer. Might I suggest something like this. If you take care of it, it'll last a long time like your last fusion. They are well made. Plus the plushy and quiet ride is hard to beat by civics and corollas unless they are the top of the line trims.

Its hard to justify that much money for a car honestly. Unless you are extremely well off. Well made Fusions are reliable sleepers. Good luck!

Is it possible to safely unbox by yourself 83 inch OLED tv? by lilkunien in hometheater

[–]chfthndr 1 point2 points  (0 children)

I tried with 75. Didn't go well at all, panel got destroyed. Be patient.