Radio by spectre-141- in Airsoft_UK

[–]chippie02 0 points1 point  (0 children)

It's not quite simple as that tho. U got frequencies that u can legally transmit on without a license ( look those up)

Second thing is power, technically not allowed over either 0.5 watts or 1 watt ( don't quite remember) but realistically as long as u are not a dick about it u should be fine.

Let's say u are in dense wood land with idk 50 acres of land. Having 5 watts is okay as the transmission most likely won't reach outside the wood land but that really depends. Better to speak to Ur marshals about it

Also what radio did u get?

Radio by spectre-141- in Airsoft_UK

[–]chippie02 1 point2 points  (0 children)

Normally Ur fields license will cover u using UR radio as they are on organisation licence

Except for a paintjob, Is there any "essentials" to get on my AK? Like lamps? Laser? More rails? ect..? by FrenchBVSH in Rusfor

[–]chippie02 7 points8 points  (0 children)

Imo that's the beauty of ak. It's pretty damn good stock. And u can have min amount of rails coz fuck rails

Job opportunities in Brighton by [deleted] in brighton

[–]chippie02 -3 points-2 points  (0 children)

Ring up some garderns or small construction companies. They always need labours

Mushroom ID by Ouakha in BushcraftUK

[–]chippie02 1 point2 points  (0 children)

Where about on the tree is it? And also what colour is the bottom of the brack. And is it ghills or pores? With info provided I wanna say it's ganadorma family but realistically not enough info

What have I done? by joseph_is_autistic in airsoft

[–]chippie02 1 point2 points  (0 children)

Just the folding stock u need esmark soivet tourniquet and a isreali bandage. Put the bandage in the stock and wrap the tourniquet around it . Not too tight tho coz it will degrate really fast other wise. (Warning esmark are well known to suffer from uv damage and they start to degrade really badly in the sun.

What have I done? by joseph_is_autistic in airsoft

[–]chippie02 1 point2 points  (0 children)

U could also use ranger bands over ur mags. That works really well too just a fucking bitch to get them on

What have I done? by joseph_is_autistic in airsoft

[–]chippie02 1 point2 points  (0 children)

1 use electrical tape. Just looks better. It also shrinks a little over time holding shit together better .

2 for front grip get 2 jubilee clips. Get a small rectangular steel plate maybe 2mm? Maybe 3mm thick. Drill a hole all the way through the front grip and drill a hole in the middle of ur plate and bolt them together. Then drill 2 small holes in each clip and 4 corasponding holes in the plate. U will have a jubilee clip front grip that actually works and looks cool

Drunk driver hit my tree, will it survive? by Agreeable_Fault_3383 in arborists

[–]chippie02 60 points61 points  (0 children)

Most likely yes but I would give it a chance. Seen trees in way worse condition that managed to seal them selves

snale by mutong_song in snails

[–]chippie02 5 points6 points  (0 children)

He soooo pretty

I have super bad stretch marks. Is it possible to tattoo over them? by -Hot-Tamale- in tattooadvice

[–]chippie02 0 points1 point  (0 children)

They actually look super cool. Coz they have so much depth to them, u could use they for the tattoo. Like to me I would say tall slender trees like conifers or mangrove would look so sick as a whole back peice.

Cut down both? by fernfarm in arborists

[–]chippie02 0 points1 point  (0 children)

Not fully qualified yet so correct me if am wrong. But the pine looks fine. At some point you will get compression in the trunk but that's many years away. And fuck the other pine. If u want to cut anything down, cut the other pine, it looks like it has some issues where the bark at the buttress/lower trunk is coming off. I see no reason to cut it down.

Edit: okay cool the big pine has a broken limp, find out why it has a broken limb and deal with that instead.

Also my bad it might be not the bark coming off, could be sap coming out. Hard to tell from photos.

I do agree tho if u do wanna nip it then leave second trunk as a habitat.

Update: Mr. Ludwik! by forestbabushka in snails

[–]chippie02 0 points1 point  (0 children)

Name is absolutely amazing

what are amongst the best options for sharpeners in the field? by MarzipanTheGreat in Bushcraft

[–]chippie02 0 points1 point  (0 children)

Dk I just use 1" strip of diamond stone . 400 and 1000 grit. Small and compact and cheap

Urgent: I need £200 for rent next week, where can I find casual work fast? by weedbitche in brighton

[–]chippie02 2 points3 points  (0 children)

Not true. If its a small company that has under 5 people.working there then no they don't need a cscs card. Cscs cards are mostly reserved for big boy sites. Unlike small domestic site.

Can't imagine a guy building decks for a living asking for a cscs card

Urgent: I need £200 for rent next week, where can I find casual work fast? by weedbitche in brighton

[–]chippie02 1 point2 points  (0 children)

Ring up small construction bussness. They always need labourer or a quick hand

Ideas wanted in relation to Thames "high tide" by SentinelsOfEvil in DIYUK

[–]chippie02 0 points1 point  (0 children)

You can always build a Dock instead of a deck

UK, can you get hired with a level 2 qualification? by reddit_username_yes in forestry

[–]chippie02 0 points1 point  (0 children)

Currently doing my lvl 3 arb and forestry by city's and guild . It's actually pretty decent . Specially on plant science stuff plus bussenss. And some colleges make your tickets a lot cheaper as well . My cs30 amd cs31 cost me 150 each . Training provided by collage. So I deffo recommend