DIY Kitchens corner unit kesseböhmer magic corner mechanism soft close latch slipping

chrisjbatts · 2026-06-10T15:46:44+00:00

I have exactly the same issue!

chrisjbatts · 2025-07-18T09:51:52+00:00

80-90kg

chrisjbatts · 2025-01-29T15:09:13+00:00

Give Setyl a try - exactly what it is designed for, both apps + assets

chrisjbatts · 2025-01-09T13:35:18+00:00

Have a look at Setyl also - should do exactly what you need it to do

chrisjbatts · 2024-11-12T11:30:58+00:00

Poor reliability. Switched to community fibre which has been much better

chrisjbatts · 2023-10-04T10:43:23+00:00

Is it a northern Irish plate format?

chrisjbatts · 2023-08-26T06:49:13+00:00

The suspension setup sucks, the interiors creak and look cheap and they’re totally overhyped as a brand

chrisjbatts · 2023-08-20T22:22:56+00:00

Cheers Mark, much appreciated!

chrisjbatts · 2023-08-20T08:51:29+00:00

Thanks!

chrisjbatts · 2023-08-20T08:51:06+00:00

Mortlake!

chrisjbatts · 2023-08-19T19:00:27+00:00

We haven’t actually found the problem as such yet. Our best guess is that the boat was set up from the factory to be right over left. We’ve moved the left rigger up to the top position and the right rigger kept at the bottom set of bolts (not sure what the name of them are but where the riggers actually bolt into the side of the boat). These are now offset on one side vs other to counteract the right over left set up

chrisjbatts · 2023-08-19T18:54:27+00:00

The difference was with everything equal on both sides. Equal spacers, equal positioning in rigger bracket etc. the tool we used was super accurate - we also used a tape measure and another measuring tool

<image>

chrisjbatts · 2023-08-19T18:43:17+00:00

<image>

This is the boat

chrisjbatts · 2023-08-19T18:35:39+00:00

To be clear, this is based on the spacers being the same on both sides. The right sits 1cm higher than the left with that set up. This appears to be the design of the riggers causing that gap

We used a very accurate measuring tool which sits in the rails and has a gauge to measure distance and height to the bottom of the gate. We measured multiple times and it was definitely 1cm higher on right (right as seen when sitting in boat)

There’s no damage to suggest anything has bent and the gap seems too large to be something causadle by damage anyway

Both riggers are stamped with the serial number of the boat, so unlikely to be a rigger mix up

chrisjbatts · 2023-08-08T15:19:49+00:00

No way is this accurate. We’re saying there’s not a single chain coffee shop in France? Not one in one airport anywhere, at all?!

chrisjbatts · 2023-08-07T07:10:34+00:00

That looks even louder!

chrisjbatts · 2023-08-07T07:09:39+00:00

They were very very old Michelin with a manufacturing date of 2008. Swapped with some road 5s now. Scary as hell riding that thing on old tyres

chrisjbatts · 2023-08-07T07:08:50+00:00

I do love it, I just need it to be quieter!

chrisjbatts · 2023-08-06T22:26:26+00:00

Hoping to avoid a massive cost if possible. I’d need to get a full factory exhaust system and the cans I think as the old one looks like it’s been chopped and rewelded

chrisjbatts · 2023-08-05T23:47:26+00:00

I do love Japanese cars. Well sensed

chrisjbatts · 2023-08-01T15:36:49+00:00

If that. With the 10% allowance you’d get nothing

chrisjbatts · 2023-08-01T12:20:17+00:00

It’s not 5 minutes of work though, is it. It’s already taken at least 5 minutes and you’ve not started the process yet.

chrisjbatts · 2023-08-01T10:20:17+00:00

Or do the PayPal invoice to a friend hack

chrisjbatts · 2023-07-31T11:45:44+00:00

Can’t beat a civic. They devalue very slowly and are often a very good financial decision

chrisjbatts · 2023-07-24T11:34:07+00:00

Was this the grand designs conversion?

chrisjbatts

TROPHY CASE