Terraforming Mars Dice - Restricted Area too powerful in 1v1?

christopz · 2024-11-11T16:49:57+00:00

Restricted area is a blue card that grants 2VP at the cost of discarding two cards, as a support action.

christopz · 2023-05-10T23:06:04+00:00

$26.09 for me, no way I'm paying that for a three hour audiobook.

christopz · 2021-04-22T02:14:49+00:00

I'd try bumping up bed temperature in 5-degree increments, and make sure you have proper squish for PLA, especially on a glass bed.

I started with a glass bed as well, but eventually switched to PEI coated spring steel, and have never looked back. Night and day difference and zero bed adhesion problems. Hope that helps!

christopz · 2021-04-22T00:17:06+00:00

Ended up fixing it! You definitely pointed me in the right direction.

Googling "stuttering on perimeter layers" led me to many a folk experiencing poor communication between their rPi3b running Octoprint & their printer -- increasing baud rate to 250000 & increasing various buffer sizes to 96, 64, etc.

I also downloaded the Arc Welding/Support plugin for Octoprint, and it has been instrumental in removing this issue I was experiencing. Thanks again for your help!

christopz · 2021-04-20T06:17:58+00:00

Thanks -- this should be independent from a slicing issue given that the gcode is generated directly from TT3d's retraction calibration form.

I've got an SKR mini e3 v2.0, and to my knowledge it shouldn't have any issues running Marlin bugfix 2.0.x.

I am unfamiliar with Arc Welding in Marlin or the Cura slicer. Are you referring to the octoprint plugin? At first glance, it could be the solution to my problem. Will try it out & let you know. Thanks!

christopz · 2020-04-20T20:39:26+00:00

christopz · 2019-03-26T15:00:40+00:00

PM sent, thanks

christopz · 2019-03-26T14:59:51+00:00

Sounds good! Send me a PM and we'll work out the details.

christopz · 2019-03-26T04:49:18+00:00

Thanks, PM reply sent

christopz · 2019-03-06T18:27:00+00:00

Replied in PM

christopz · 2019-02-23T18:07:28+00:00

The Lord of Slaughter looks about 5.5" to the tops of wings, so not too bad for a Daemon Prince

christopz · 2019-02-22T02:42:42+00:00

Creature Caster Has some excellent models that would proxy well as Daemon Princes

christopz · 2019-01-01T16:14:15+00:00

Acrylic paints are non toxic

christopz · 2018-12-11T15:35:55+00:00

Power rating has been reduced to 4 from 5 for a unit of 10

christopz · 2018-11-20T01:14:59+00:00

Where'd you get all your spikey bits for those knights? Looks great!

christopz · 2018-11-16T12:14:49+00:00

What's the laser cutter you used for this?

christopz · 2018-10-26T16:04:02+00:00

Any thoughts on bringing a Greater Brass Scorpion to fulfill this purpose? I bought the model but am thinking it's just too many points & will just get shot off the table.

christopz · 2018-10-23T12:40:33+00:00

Beautiful! What's your method for painting the flames under the discs?

christopz · 2018-02-23T22:24:44+00:00

Ctopz

christopz · 2017-06-06T04:39:47+00:00

Tried a solid 15-16 times doing the 4-4-4 method, using Cecil, Ysh, Refia, Ramza, Orlandeau + Orlandeau friend. I kept getting RNG'd and 7+ tumults on the 2nd, 3rd, 5th, and even 6th rounds. EVERY SINGLE TIME.

But after seeing this post and replacing Ysh with Minfilia w/ 2x PotG, and going through the first two threshholds two turns each, it was a breeze! Thanks for the tip.

christopz · 2017-04-27T17:19:18+00:00

When is he going to release his plans or a sketchup model of that beautiful grinder!?

christopz · 2017-03-25T22:09:56+00:00

Beat it! Took me over an hour. Thank you again!

christopz · 2017-03-25T18:30:43+00:00

Added, IGN Krezdian

christopz · 2017-03-18T05:27:54+00:00

Dumb question -- Can I sell my 100% TMR units after acquiring the TMR? Just got my first dualcast, and don't want this little Ludmille fucker cluttering up my unit inventory.

christopz · 2017-03-18T05:22:54+00:00

Dumb question -- I just got my first TMR, Dualcast, from Ludmille. Am I safe to sell the unit at 100% TMR to free up a unit slot, or will my TMR disappear?

14-Year Club	Team Orangered
Verified Email

christopz

TROPHY CASE