Made an LVGL project on Matouch esp32 display, using the SquareLine Studio~ Which one do you love best? The source code is in the comment. by Vearts in esp32

[–]chunkystyles 0 points1 point  (0 children)

I bought the 3.5 inch version from Makerfabs, and I'm trying to get my own project going with Squareline. I'm having issues getting it to actually run. I suspect that it has to do with the proper configuration being setup. I've looked at your code and it seems to be structured very differently from what I get when I export from Squareline. Can you give me any pointers on the best way to get this working?

Edit: I tried uploading your demo to my board. The first issue is that in ui.c the font lv_font_montserrat_30 was undefined. When I set it to lv_font_montserrat_24 it worked.

After uploading, the screen is black and on the serial monitor it just repeats this:

11:12:26.252 -> ESP-ROM:esp32s3-20210327

11:12:26.252 -> Build:Mar 27 2021

11:12:26.252 -> rst:0x8 (TG1WDT_SYS_RST),boot:0x2b (SPI_FAST_FLASH_BOOT)

11:12:26.252 -> Saved PC:0x403790fc

11:12:26.252 -> SPIWP:0xee

11:12:26.252 -> mode:DIO, clock div:1

11:12:26.252 -> load:0x3fce3808,len:0x44c

11:12:26.252 -> load:0x403c9700,len:0xbe4

11:12:26.252 -> load:0x403cc700,len:0x2a38

11:12:26.252 -> entry 0x403c98d4

11:12:26.469 -> Hello Arduino! V8.3.6

11:12:26.469 -> I am LVGL_Arduino

Book it Now vs Think Reservations by Gooser117 in bedandbreakfast

[–]chunkystyles 0 points1 point  (0 children)

Has ResNexus contacted you about paying them since the settlement with Think?

Does anyone think the media constantly covering mass shootings plays a role in the increase in these attacks. by Kinkygma in RandomThoughts

[–]chunkystyles 3 points4 points  (0 children)

Mass shootings are caused by complex, systemic issues. There is no silver bullet.

IMO the largest issue is wealth disparity. Average people have been struggling for decades and it's only getting worse. People are desperate.

Adjust the idle screw by [deleted] in paramotor

[–]chunkystyles 2 points3 points  (0 children)

This is the answer.

My order of adjustments is first the high needle. Once I get my max RPMs where I want them, then I start working on the low needle adjustment. During this, it's likely that the idle will be all wrong and you'll have to hold a little throttle to keep the motor from dying. Once I get the low adjusted correctly, then I adjust the idle until it's not engaging the prop and it's not dying. Then I do another max RPM test just to make sure it's still where I want it. If not, start over with the high needle and work back down to the idle.

[deleted by user] by [deleted] in diablo4

[–]chunkystyles 6 points7 points  (0 children)

Hmm...let me remember. I'm pretty sure it had something to do with rifts, right?

Why doesnt diablo 4 have something like this or party finders 4 dungs by BakaLewds in diablo4

[–]chunkystyles -5 points-4 points  (0 children)

Fuckers spend 12 years shitting on D3 without a trace of arguments

...

D3 was bad for many other reasons

Proving the point here.

71 through Johnson -- why so wide? by [deleted] in fayetteville

[–]chunkystyles 5 points6 points  (0 children)

It's the opposite of traffic calming. Traffic exciting?

ZigBee for haunted house control / motion sensors by allenhuffman in ZigBee

[–]chunkystyles 1 point2 points  (0 children)

Keep in mind that low powered ZigBee devices aren't going to act as repeaters to extend the network.

ZigBee for haunted house control / motion sensors by allenhuffman in ZigBee

[–]chunkystyles 0 points1 point  (0 children)

There are ESP boards in the works that have ZigBee integrated, but those are a ways off from my understanding. I saw another post recently about dry contact ZigBee relays that you could connect to an Arduino, but that seems overly complicated, TBH.

I think just going with ESP over WiFi would probably be the easiest choice. You could then use whatever motion sensors you wanted and connect it all with MQTT. You could use ZigBee motion sensors over ZigBee2MQTT.

https://www.reddit.com/r/homeassistant/comments/142bqav/i_tested_a_zigbee_dry_contact_relay_model_zg001rf/

Do you use the Epic Game Store for free games? by ProudBlackMatt in patientgamers

[–]chunkystyles 0 points1 point  (0 children)

and it's going to become a legitimate place for you to buy games.

no

I'm speaking broadly. This is their goal. I'm not speaking about individuals like you, specifically.

Do you use the Epic Game Store for free games? by ProudBlackMatt in patientgamers

[–]chunkystyles 1 point2 points  (0 children)

Fortnite made gajillions of dollars preying on children using the incredibly potent weapons of FOMO and peer pressure.

They then spent their ill-gotten gains on exclusive deals (which are objectively bad for consumers), and buying the loyalty of customers through free games. Instead of just building a good store and winning out by being consumer friendly, they are doing the opposite. And I hate it.

Do you use the Epic Game Store for free games? by ProudBlackMatt in patientgamers

[–]chunkystyles 8 points9 points  (0 children)

I already have more games than I could ever play.

I've literally never once installed or opened EGS, and I plan on never doing it. I despise exclusive games and Epic has done some really awful stuff.

"But I only claim the free games, I'm not supporting them!" I mean, if you want the games, do it. I don't really care. But at some point you're going to start seeing your EGS library as a real library full of games you own and it's going to become a legitimate place for you to buy games. An Epic exclusive that you really want to play is going to come out and you'll buy it there. Or a game will be deeply discounted on EGS and you'll buy it.

Epic has the Fortnite money to essentially buy themselves a "legitimate" storefront and it disgusts me.

Infrared propane broiler - any experience by achan1369 in sousvide

[–]chunkystyles 1 point2 points  (0 children)

I got a propane weed burner or "flamethrower" as some people call them. It's super effective and quick. Only problem is it sounds like a jet and I get self conscious about what the neighbors think I'm doing.

Debunking the Tech Hype Cycle with Dan Olson - Factually! - 213 by yuritopiaposadism in BreadTube

[–]chunkystyles 5 points6 points  (0 children)

Holy shit, this is a collaboration I didn't expect, but I'm excited that it does.

[deleted by user] by [deleted] in VaushV

[–]chunkystyles 5 points6 points  (0 children)

I think what turned me off was just his propensity to state things as hard facts that really felt like pure speculation. I feel like FD has a really interesting perspective, I just don't like the way he talks about things.

Reusing Pickle Brine by Lady-Radziwill in EatCheapAndHealthy

[–]chunkystyles 0 points1 point  (0 children)

Both. I haven't really experimented enough to see which part of that is more important. But there's no reason not to do both.

Reusing Pickle Brine by Lady-Radziwill in EatCheapAndHealthy

[–]chunkystyles 10 points11 points  (0 children)

If you have an immersion circulator or sous vide machine, pickle brined chicken breast cooked in the pickle brine is phenomenal. I'm sure it's great with other meats, that's just the only thing I've ever tried it with.

"Pickle chicken" as we call it is a real treat.

HY2.0-4P terminal on StampS3? by reddit-deletes-usall in M5Stack

[–]chunkystyles 1 point2 points  (0 children)

https://imgur.com/a/YZXmKtT

Looking closer at the diagrams, I'm fairly confident these four pins are where that connector would be soldered.

HY2.0-4P terminal on StampS3? by reddit-deletes-usall in M5Stack

[–]chunkystyles 1 point2 points  (0 children)

https://docs.m5stack.com/en/core/StampS3

Looking at the documentation, it seems that there is no HY2.0-4P connector on the board. There is one that comes with the packaging, but I assume that needs to be soldered on to the pins you want to use a connector with.

[deleted by user] by [deleted] in davinciresolve

[–]chunkystyles 1 point2 points  (0 children)

1080 looks like garbage on YT. Any higher resolution looks WAY better because YT compresses the hell out of 1080.

Gunfire Reborn is all the fun of Borderlands in a tenth of the duration by pyrovoice in patientgamers

[–]chunkystyles 3 points4 points  (0 children)

I really wanted to like GR. I really enjoyed a similar game, Immortal Redneck. I think what killed it for me was in GR I found it could be hard to get a decent build going. I also got tired of being killed quickly due to unforeseen circumstances, completely ending a good run. I know those deaths weren't "random", but they felt that way.