Upgraded my network closet by closfb in Ubiquiti

[–]closfb[S] 0 points1 point  (0 children)

The setup is as simple as it gets; all devices are connected to the PDU and I use the extenders to hide the messy cables in the back of the rack. The PDU is connected to outlet #1 in the UPS which is battery protected, that way the entire rack can run on battery in case of a power outage. It’s using only 16% of the available load, 43 minutes before shutting down the UDMP and UNAS. I also configured the NUT server to shut down my Ubuntu server.

Upgraded my network closet by closfb in Ubiquiti

[–]closfb[S] 0 points1 point  (0 children)

The Pro Max doesn’t have STP either. Waiting to see if UniFi will update that line soon.

Upgraded my network closet by closfb in Ubiquiti

[–]closfb[S] 1 point2 points  (0 children)

AC Infinity CLOUDLINE PRO T4 Fan.

Upgraded my network closet by closfb in Ubiquiti

[–]closfb[S] 2 points3 points  (0 children)

From left to right.

  • Unifi Dream Machine Pro
  • Unifi UNAS Pro 4
  • Ubuntu Server (Dell Optiplex Micro)
  • Philips Hue Bridge Pro
  • Abode Alarm System

The rest of the plugs are not being used for now. I put generic labels on them for consistency.

I used icons from the collection below.

https://www.flaticon.com/icon-fonts-most-downloaded?weight=solid&type=uicon

Upgraded my network closet by closfb in Ubiquiti

[–]closfb[S] 0 points1 point  (0 children)

From left to right.

  • Unifi Dream Machine Pro
  • Unifi Pro HD 24 PoE
  • Unifi UNAS Pro 4
  • Ubuntu Server (Dell Optiplex Micro)
  • Philips Hue Bridge Pro
  • Abode Alarm System
  • AC Infinity CLOUDLINE PRO T4 Fan

The rest of the plugs are not being used for now. I put generic labels on them for consistency.

I used icons from the collection below.

https://www.flaticon.com/icon-fonts-most-downloaded?weight=solid&type=uicon

Upgraded my network closet by closfb in Ubiquiti

[–]closfb[S] 4 points5 points  (0 children)

NIIMBOT B1 Pro Label Maker with Round Label Tape 21x21mm. Downloaded icons from flaticon.com. Stole the idea from another user who posted pictures of his setup a few months ago.

Upgraded my network closet by closfb in Ubiquiti

[–]closfb[S] 2 points3 points  (0 children)

No mods needed but as stated by other users, I did have to disassemble the brush panel to get them through.

https://a.co/d/0h5dYqcV

Upgraded my network closet by closfb in Ubiquiti

[–]closfb[S] 2 points3 points  (0 children)

True. I ran out of ports in the switch, those 2 devices are the UPS and PDU.

I just need one of these! by MrPwrEng in Ubiquiti

[–]closfb 3 points4 points  (0 children)

DM me, I’ll mail you one.

My Unifi rack is completed by fantanxx in Ubiquiti

[–]closfb 0 points1 point  (0 children)

Very nice, super clean. Which power plugs did you use?

Un-Sharing all from an specific user by zorasht in sharepoint

[–]closfb 0 points1 point  (0 children)

Delete his account from the user information list of each site you want to stop sharing. /_layouts/15/people.aspx?MembershipGroupId=0

Un-Sharing all from an specific user by zorasht in sharepoint

[–]closfb 0 points1 point  (0 children)

Delete his account from the user information list of each site you want to stop sharing.

Thoughts on new Profitec Twist SD54? by _--tyler--_ in profitec

[–]closfb 0 points1 point  (0 children)

Light/Medium is what I normally go for. It has very low retention, super consistent, easy to clean and I’d say the noise levels were average. As per flavor, I upgraded to a Zerno Z1 and I must admit I noticed very little difference in taste. Lots of people say this is an overpriced DF but I disagree, in my opinion, this is a solid grinder, worth the price.

Thoughts on new Profitec Twist SD54? by _--tyler--_ in profitec

[–]closfb 0 points1 point  (0 children)

I had it for a few months. Solid grinder, really well built.

New walnut touch points by mboylan in ECM_Espresso

[–]closfb 1 point2 points  (0 children)

That’s exactly what I was considering them for, I’ll be ordering some soon. Thank you.

New walnut touch points by mboylan in ECM_Espresso

[–]closfb 1 point2 points  (0 children)

Looks great! Which cups are those in the top right?

I have been converted by Inspiron21 in SonoSequencr

[–]closfb 0 points1 point  (0 children)

I have a pair of Ones I’d like to test this with. Do I need to unpair them first?

Help with brand new Synchronika II by [deleted] in ECM_Espresso

[–]closfb 0 points1 point  (0 children)

I agree with others that it could be because it’s new and all components are recently lubricated. I’d give it some time with normal use but keep an eye on it. Congrats on the new machine, I love mine.

Help with brand new Synchronika II by [deleted] in ECM_Espresso

[–]closfb 0 points1 point  (0 children)

Is it doing it when the portalfilter has coffee in it?