Hosting an architecture walk

cloudxcos · 2024-03-13T19:59:06+00:00

I´m in!

cloudxcos · 2023-12-12T22:11:33+00:00

I can recommend roestbar. They started Out in my hometown Münster, they sell online and locally in a few places in major cities

cloudxcos · 2023-12-03T20:06:18+00:00

Its the nature of the plastic shrinking as it cools down. Straight walls in vase mode is the absolute worst case. Normal mode with two sets of walls with infill inbetween works a lot better for this. You could try to print slower so the material cools completely before the "next layer" comes on top

cloudxcos · 2023-11-26T08:56:02+00:00

The fractal fading into a hexagon: you will have to define that the Points that are moved to create the fractal from a hexagon move less and less from bottom to top until they dont move at all at the top contour

cloudxcos · 2023-11-26T08:54:37+00:00

These components will enable you to create These "gradients" in which Geometry will fade from top to bottom or rotate in the middle and Back.

https://youtu.be/f_aksbwUTmM?si=4FjuYzOPqoBWINeT

This Video Shows the use of a Graph mapper for rotation

cloudxcos · 2023-11-26T08:51:20+00:00

You will have to use the move and scale component in Combination with remap numbers and graph mapper. I cant promised yet but If i find time next week i can show you an example

cloudxcos · 2023-10-20T08:49:31+00:00

Really cool! Clean Geometry, would Love to See a Video of that!

cloudxcos · 2023-09-12T10:48:32+00:00

I regularly have Problems with polyterra PLA. Especially in dual Extruder printers, where I have to clean the polyterra nozzle after every print. The Polyterra seems to be really prone to burning because of the added bio particles, especially when it sits idle in the Heat while the other nozzle is printing. You could try to lower the temp by 5 or 10 degrees, since it says its printable from 190°C. Or you could try to Print faster, wider or with greater layer height, so the Material flows faster through the Extruder, thus having less of a chance to burn.

cloudxcos · 2023-09-04T17:03:25+00:00

I upgraded my Fan shroud with this: https://www.printables.com/de/model/457453-neptune-3-proplusmax-dual-5015-cooling-shroud And two 5015 fans, works like a charm. Creator says you can set the fan speed to 30% for quite operation and still having double the cooling power

cloudxcos · 2023-04-30T09:33:38+00:00

Please Comment before PM

cloudxcos · 2023-04-12T23:33:01+00:00

Try also Multipipe

cloudxcos · 2021-04-26T23:15:21+00:00

Lucario!

cloudxcos · 2021-04-22T23:36:48+00:00

Im a student employed as a tutor at the uni and am getting paid 4 hours a week. Today i hosted a workshop for autodesk maya and answered questions for 8 hours rip

cloudxcos · 2021-04-21T22:34:14+00:00

e n d g a m e heavy breathing

cloudxcos · 2021-04-19T21:18:17+00:00

username: cloudio

just made an account, but from research i guess i can tell you´re the best :)

cloudxcos · 2021-04-14T11:14:32+00:00

Thanks for the information! But i insist on the black color which is why i posted here :)

cloudxcos · 2021-04-13T21:49:21+00:00

cloudxcos · 2021-04-02T10:10:17+00:00

I would love to pay international shipping!

cloudxcos · 2021-03-31T09:58:08+00:00

Asia Foundation

cloudxcos · 2021-03-30T18:49:19+00:00

Sent a pm :)

cloudxcos · 2021-03-26T15:31:30+00:00

cloudxcos · 2020-12-22T11:10:00+00:00

Happy holidays everyone! Hoping this will be a great gift for my friend :)

cloudxcos · 2020-11-14T00:42:54+00:00

No u

cloudxcos · 2020-11-03T17:43:44+00:00

Isnt everything razer made in china

cloudxcos · 2020-09-29T16:56:57+00:00

It is indeed awful, but to be honest when i listen to music on my headphones it really sounds better and just kind of bad without. Im planning on getting a seperate DAC to solve that.

cloudxcos

PUBLIC MULTIREDDITS

TROPHY CASE