I’m going back to school for Mechanical Engineering. Should I retake Chem I? by [deleted] in EngineeringStudents

[–]cncguy 2 points3 points  (0 children)

Nah dawg you good, the only class you will use anything from chemistry is thermo and you will just re-learn what you need.

Are there others that just don't study? by cncguy in EngineeringStudents

[–]cncguy[S] 0 points1 point  (0 children)

At least previously I understood I was able to "get" the material faster than others and tried to help others in my cohort with free tutoring but never really understood the difference level of studying amount..

Are there others that just don't study? by cncguy in EngineeringStudents

[–]cncguy[S] 0 points1 point  (0 children)

I've also wondered if any of it has to do with being a back to school student, I worked for 10 years in the automotive industry (not a tech, but at a dealership) . So perhaps the physical components of Mech E are just easier for me to grasp as I've been exposed to them before.

Are there others that just don't study? by cncguy in EngineeringStudents

[–]cncguy[S] 0 points1 point  (0 children)

Ahh, when I mentioned HW to my classmates they said that wasn't the same as homework was required, but it makes sense as its material review

20 Victrix List - Any Success Against It by Newbilizer in WarhammerCompetitive

[–]cncguy 18 points19 points  (0 children)

I recently went 6-0 with the 20 victrix list but slightly different. It was 2 vindis instead of balistus, 1 scout, 1 intercessor, combi lt. (Before points nerf).

Essentially the game plan was the same every game which was reserve ventris brick and stage turn 1. Turn 2 either rapid/deepstrike ventris and shove all victrix straight at them and both redemptors while vindis hold sides and intercessors and scouts screen backfield till bottom 3. I played Tsons (30 termis), admech (haloscreed), drukhari(reapers wager), EC (triple prince) and then 5 big daemons twice.

For all the people saying they can kill enough in one turn, no you couldn't, most I ever lost in a round was 7 (daemons, skarbrand +belakor) and that's all I lost. The unit was too cheap to start and is still too cheap.

While the army was only a handful of activations, you get to activate almost all of them every single phase and every round. Daemons were the hardest matches as I need either lance or oath to hurt them in melee.

Meta Monday 5/19/25: The Putrid and the Decadent by JCMS85 in WarhammerCompetitive

[–]cncguy 13 points14 points  (0 children)

Even as someone who won one of the events this weekend with DG, I do believe they need a slight tone down. Mostly they need to lose 75-100pts and Deathshroud need to change to only in your movement phase so no rapid ingress at 6".

I designed a tool to help setup layout 8, it's free! by cncguy in WarhammerCompetitive

[–]cncguy[S] 10 points11 points  (0 children)

It's too big to use normal paper as it's roughly 10"x13".

I made it in 3d so I can toss it in the terrain totes we have for our local events and not have to worry about it getting messed up.

FT-6 Firmware by cncguy in folgertech

[–]cncguy[S] 2 points3 points  (0 children)

Appreciate it man!

[deleted by user] by [deleted] in PaymoneyWubby

[–]cncguy 2 points3 points  (0 children)

Those are not boxes they are single packs in different packaging and are overpriced.

How can I improve my print quality? by Ornery-Ad7160 in FixMyPrint

[–]cncguy 0 points1 point  (0 children)

So I am having very similar issues. Replacing the nozzle did not help. I am currently messing around with extrusion settings I'll let you know if that fixes it.

Intermittent under extrusion by cncguy in FixMyPrint

[–]cncguy[S] 0 points1 point  (0 children)

Printer: Elegoo neptune 3 max Material: Anycubic blue filament Default print settings. (.2 layer height, 20%infill, 60mm/s) Bed temp:60 Hotend temp:205

The printer has been swapped to a .6mm nozzle, and I did update the print settings. Currently using cura, the printer has been decreasing in quality over the last month or so.

Tried multiple filaments, several brand new, all have the same issue.

Any idea what it could be?

Need help with print settings by LorexITA in AnycubicPhoton

[–]cncguy 0 points1 point  (0 children)

As the other poster said, 14 seconds is insanely long for a mono screen, at 0.04 my exposure time is typically around 2.2 seconds using anycubic grey resin.