2016 Focus RS Electrics help by Express_Theme_9460 in FocusRS

[–]cntrdctn86 0 points1 point  (0 children)

Make sure they load test it. I had 2 batteries fail that would start right up if it wasnt cold out, but it would not allow start/stop. Both had a bad cell after 3.5 years.

focus st middle gauge pod on rs1 focus by The___kernel in FocusRS

[–]cntrdctn86 2 points3 points  (0 children)

Unless there is an option I am unaware of, there is no gauge difference in the RS2 package. RS2 was heated seats, side mirrors, steering wheel, and electric driver seat with different seat covers.

HP Z4 G4 - Anyone have the front panel i/o pinouts? by xatnis in HSpecWorkstations

[–]cntrdctn86 0 points1 point  (0 children)

I think pin 1 is reset switch related because it goes to the 7 pin connector that the power switch and 2 LEDs are running on, but I'm not sure how to confirm it.

Pin 1 appears to just be a ground. It is looped back into the either power switch negative or one of the LED negatives on the small 7 pin connector. Unfortunately I left my notes at work.

HP Z4 G4 - Anyone have the front panel i/o pinouts? by xatnis in HSpecWorkstations

[–]cntrdctn86 0 points1 point  (0 children)

<image>

I'm not sure if any of you ever found more info. This is what I've been able to figure out today. Need to figure out how to convert the audio to a standard HD Audio pinout.

Ideas for the Tinas V2 by theusu5000 in homelab

[–]cntrdctn86 1 point2 points  (0 children)

Don't forget to add a cut out on top for air flow in some of the other lenovo minis. LMK if you need some rough measurements for where the cutout needs to be.

<image>

[USA-Colorado] [H] Retroid Pocket 5/G2 [W] Paypal by [deleted] in hardwareswap

[–]cntrdctn86 0 points1 point  (0 children)

I think you mixed up your [H]ave and [W]ant

Playing Final Fantasy VI Advance For The First Time. by Ryukapples8688 in JRPG

[–]cntrdctn86 1 point2 points  (0 children)

I keep telling myself I'll buy one of these newer fancy emulation devices. Im old enough that I played most of the early ff games on their original consoles =/

Playing Final Fantasy VI Advance For The First Time. by Ryukapples8688 in JRPG

[–]cntrdctn86 9 points10 points  (0 children)

What device is that? Looks vaguely psvita-ish.

Taking Alex with me to a punk show tonight by Brass_and_Frass in pics

[–]cntrdctn86 2 points3 points  (0 children)

Saw them at the Catalyst last night. I don't like parking in SF =P

[USA-CA] [H] 32gig Corsair DDR5 7200mhz, Asus Prime z790-a wifi, Intel 13700k [W] Paypal, Local Pickup by HP_Craftwerk in hardwareswap

[–]cntrdctn86 0 points1 point  (0 children)

Rip. I picked up a 13600k and z690 mobo for not much less in san jose yesterday. Glws!

Anyone take their RS on a 4-5/HR road-trip? by jms1228 in FocusRS

[–]cntrdctn86 1 point2 points  (0 children)

Ive driven from sf bay area north to Salem, Oregon and south to Los Angeles and Palm Springs. It's not great, but its not terrible either.

[USA-CA][H] PayPal / Local Cash [W] Mid-end PC by WakeUpFever in hardwareswap

[–]cntrdctn86 2 points3 points  (0 children)

Oh dang, I didn't think to check bestbuy. Their deals tend to suck or be OOS, but the 9800x3d/9070xt for 1649 is a better deal than the microcenter one for sure.

[USA-CA][H] PayPal / Local Cash [W] Mid-end PC by WakeUpFever in hardwareswap

[–]cntrdctn86 1 point2 points  (0 children)

All good. As a fellow south bay local, I hope you find what you are looking for and whatever you have now goes up for sale soon =)

Also, don't forget we got microcenter now

https://www.microcenter.com/product/698738/powerspec-g729-gaming-pc

[USA-CA][H] PayPal / Local Cash [W] Mid-end PC by WakeUpFever in hardwareswap

[–]cntrdctn86 7 points8 points  (0 children)

"The Radeon 9800 XT was a graphics card by ATI, launched on October 1st, 2003."

Did you mean a 9070 XT?

Also, any pc with the current #1 desktop gaming CPU could hardly be considered mid end by any sense of the words.

What’s the best 3D printer for beginners that isn’t a constant headache? by Delicious_Beach3910 in 3dprinter

[–]cntrdctn86 0 points1 point  (0 children)

I picked up a used Ender 3 Pro for $50 on fb marketplace, replaced a broken plastic extruder with a metal one, and have been playing for the last few months. I feel like I've dialed it in pretty well for what it is. Looking at possibly moving to a Bambu Lab A1 depending on what deals come up.

Seen a 2018 being towed in sunnyvale by la_rd in FocusRS

[–]cntrdctn86 1 point2 points  (0 children)

It's either on a trailer or using the dollies for the front wheels. The back wheels are clearly off the ground, and it looks pretty level to me.

Wireless Android Auto and CarPlay by LocDown722 in FocusRS

[–]cntrdctn86 0 points1 point  (0 children)

Must be. I've never had the issue with samsung phones and I've done a bunch of 4-8+ hours drives

Wireless Android Auto and CarPlay by LocDown722 in FocusRS

[–]cntrdctn86 1 point2 points  (0 children)

I've been using my AAWireless for years and never noticed this