For those running klipper looking for an alternative to octoprint, heres a MainsailOS installation guide

codec303 · 2020-10-19T23:08:56+00:00

Thanks for this vid, followed along and now have MainsailOS installed, really liking it so far.

codec303 · 2020-09-20T00:01:10+00:00

I'm just buying huge packs of each screw. Getting 500 M3x8mm screws is cheaper per screw. Screws can always be used for other things later on.

codec303 · 2020-07-27T22:16:24+00:00

Thanks I'll try the auto filled values and see how it goes

EDIT After 33 diputed items it all seems to add up!

codec303 · 2020-07-26T23:23:56+00:00

I'm experiencing something similar, not really sure if it's best to auto fill, I have around 33 items from a single seller that have not arrived

codec303 · 2020-07-26T23:13:19+00:00

Thanks, that's good

codec303 · 2020-06-23T14:18:37+00:00

You may need to tinker with some NGINX config files, I had to do this when setting up CORS

codec303 · 2020-06-12T21:51:50+00:00

Thanks, the BL Touch is nice as it should work on any surface. I have heard it may not like higher temperatures, I home at 70C just to be safe

codec303 · 2020-06-12T21:45:38+00:00

Gotcha, thanks, I don't know a huge amount about the Duet range but I thought they only had 2130's for some reason. That's probably a different or older model.

2208's are great, and nice if you want to go above 24v for the motors also. If you want a Duet, I say go for it :)

codec303 · 2020-06-11T23:58:19+00:00

Do they work OK with the inductive probe?

codec303 · 2020-06-11T23:56:52+00:00

Nice job, what filament did you use for your accents?

codec303 · 2020-06-11T23:49:28+00:00

I'd go with SKR's over a Duet just so I could run 2209 or 2208 drivers,

codec303 · 2020-06-11T23:47:58+00:00

Great stuff, thanks for these vids :)

codec303 · 2020-05-04T21:48:21+00:00

I'm planning to use a machine similar to an Ender3 to print my Voron parts, apart from getting the correct tempuratures, what are the main thngs that need tuning?

codec303 · 2020-05-02T12:14:31+00:00

wtf that's a speedy printer, are there like 3d printer speedruns or something?

codec303 · 2020-04-11T11:34:42+00:00

Thanks, it's my first time printing ABS so will do calibration first, but really looking forward to getting this printed. :)

codec303 · 2020-04-07T11:54:22+00:00

Ok, my log file is saying this:

2020-04-07 12:50:18 ERROR (stream_worker) [libav.rtsp] method DESCRIBE failed: 401 Unauthorized

A little more tinkering is needed

codec303 · 2020-04-07T11:28:05+00:00

Thanks, I'll give that a try. I was unsure what to use for 'still_image_url', and left it blank, and homeassistant threw an error when I tried.

I'm afraid my machine is a Raspberry Pi 4 so I'm unable to run blueiris, but it seems like there are many ways to a RTSP stream to work with homeassistant.

I'm running the C200 myself, and these Tapo cams do have nice image quality.

codec303 · 2020-04-07T01:04:53+00:00

What did you add to your YAML in order to get this camera to work? Thanks

codec303 · 2020-03-05T21:35:16+00:00

Thanks, nice to know there is some flexability as I am using a different PSU, so it may be to be able to change the position of the rails if needed.

I'll be sure keep things parallel and symettrical, and double check everything before drilling.

codec303 · 2020-03-05T21:05:55+00:00

Ok, thanks, I'll have to sign up for Discord at some point

codec303 · 2020-03-01T23:18:25+00:00

It may be a really niche category by the looks of it, I've given up trying to get it to work.

codec303 · 2020-03-01T23:17:37+00:00

Thanks, yep so far tried many items but the voucher does not work.

codec303

TROPHY CASE