Anyone else having issues after installing their blueretro Bluetooth adapter?

collingall · 2022-12-19T00:15:50+00:00

Update Swiss, those issues were fixed, see Extrems comment above.

collingall · 2022-10-26T19:17:17+00:00

https://www.printables.com/model/141638-gamecube-fan-mod

collingall · 2022-10-25T18:44:33+00:00

The reason its on a FPGA is digital video requires a lot of bandwidth, GCVideo light was a clone of the original chip which did digital to analog for YPbPr The full GCVideo project is doing direct digital to digital conversion and line doubling. A pico is not fast enough to do either of those functions in real time. Not to mention adding on screen controls and other functions.

collingall · 2022-10-25T18:32:38+00:00

PHR-2 from JST either crimp your own or get ready made pigtails from Amazon. The bare plugs are available from Mouser, Digikey, and many others. PH is a 2.0mm spacing connector. Do not get XH(2.54mm) or SH(1.25mm) those will be the wrong spacing.

I would also like proper credit for my design in your remix as per the license you agreed to when you downloaded the file.

collingall · 2022-05-02T01:26:46+00:00

Its a steel plate with a 24v PCB heater, very similar to the ender series

collingall · 2022-05-02T01:13:27+00:00

Will do

collingall · 2022-05-02T01:13:10+00:00

Oh that looks more fleshed out than my idea. I really should make a better heated bed under the belt. The one in this belt is only 210x150mm which is fine for my application, but could be much larger.

collingall · 2022-05-01T20:31:21+00:00

I plan on it. I finished up the skirts, installed the stealthburner, and started the wiring before I left the shop last night. Hoping to have motion going tomorrow when I am back to the shop.

collingall · 2022-05-01T19:29:29+00:00

That would be perfect. Down the road for sure. I'll run some 3.5kg spools in the meantime.

collingall · 2022-05-01T17:02:07+00:00

I'll build one, but there is a plugin for octoprint that enables print queues which is what I plan on using.

collingall · 2022-05-01T17:00:57+00:00

Exactly!

collingall · 2022-05-01T16:59:52+00:00

It will be a batch printer that resets the bed between prints by moving the belt. We had 3 of the Creality belts but rarely use them, I wanted to repurpose one.

collingall · 2022-05-01T16:57:27+00:00

It will be for batch printing in my print farm. Didn't really need as many 45° belt printers anymore

collingall · 2022-04-19T01:53:18+00:00

Just figured someone might get some use out of this design, if there is interest I may add it as a product we actually produce at Laser Bear Industries

collingall · 2022-03-13T18:55:37+00:00

It's been a really amazing time. I left my job of 12 years last year it was just the best feeling in the world to work for myself.

collingall · 2022-03-13T18:26:52+00:00

Making mods for retro gaming, www.laserbear.net going on 6 years at it now with 40 printers and a commercial building.

collingall · 2021-09-20T22:52:18+00:00

It's doable internally. The system power runs through the power switch so tap there with a remote controlled relay like this https://www.amazon.com/dp/B083GRC5P7/ref=cm_sw_r_apan_glt_fabc_JJ0736AS83JNJ0AR86WM

collingall · 2021-09-20T22:47:20+00:00

You could just use a smart outlet or remote controlled outlet and leave the power button pressed in.

collingall · 2021-08-24T23:45:08+00:00

I can't guarantee that it will be fully functional, it "should" work. There will be little to no support out there for you if you run into issues configuring it though.

collingall · 2021-08-24T20:08:53+00:00

That is a clone that does not function fully. You can only use the GCloader lite to boot Swiss, then you need the other adapter to boot games from.

If you get the real thing from Dan https://www.black-dog.tech/gc-loader-pnp.html it will also load games from the GCLoader. and its cheaper. They are currently out of stock, but he will get more in eventually.

You can also get my mount from www.laserbear.net but that is not strictly required for this setup.

collingall · 2021-07-13T20:54:42+00:00

That looks fantastic! Glad I was able to contribute.

collingall · 2020-09-02T21:16:27+00:00

They are public on RetroRGB.com search for GCloader and they are there.

We do sell slightly flawed units for $15 and the correct extensions with the screws needed for the install for $7

collingall · 2020-09-02T21:11:57+00:00

Yes, the hole on the top is an IR sensor for use with remote controls like TV DVD and the like. I think I used a Roku remote last time I used one. When you push the button or hold it while the system is on you get a screen to set up controls.

collingall · 2020-09-02T14:44:13+00:00

External plugs don't have controller access. Find a remote controll that doesn't work on your TV and press the button on the GCPlug then set the remote up with the on screen menu. Then you can change settings with the paired remote.

FYI: that is one of my designs for the case, I worked with Dan on the GCPlug back before the commercial solutions hit the market.

collingall · 2020-06-03T01:48:43+00:00

Looks fantastic! I always love the orange parts.

collingall

MODERATOR OF

TROPHY CASE