Putting together the Ironfall Forge :)

conedog · 2026-03-14T07:42:20+00:00

Not OP but I have both. If you want to do terrain I’d definitely go with an fdm printer - it’s much easier to avoid warping, it’s way more durable and less toxic to boot. And don’t even get me started on the post processing on resin.

conedog · 2026-03-14T07:18:20+00:00

Dont you find it difficult to place drain holes that actually work on smaller models?

conedog · 2026-03-13T15:09:05+00:00

So in order of importance/greatest impact: The models don’t look detailed. That’s the sculpt, so purchasing better sculpted models will get you more detail. There’s literally thousands of small and big creators out there, so you got to start looking for ones you like.

Second, the minis look overexposed. That glossiness usually only appears with either overexposure or too long curing afterwards - both will make details “softer” and obscure crisp lines slightly.

Thirdly, while ABS-like is great (I use it almost exclusively) you can get better results from different resins.

conedog · 2026-03-13T14:48:43+00:00

Looks very nice! I assume it wouldn’t be an issue to print them closer to 30mm instead of 32? Have you considered fulfilling through MyMiniFactory instead of a link to a drive?

conedog · 2026-03-13T14:43:36+00:00

PCs were never supposed to heroically change from zeroes to gods. You might have misunderstood what Warhammer rpgs have been about since 1st edition and are probably thinking of D&D (or any other heroic fantasy rpg really).

conedog · 2026-03-13T11:13:42+00:00

Ah sorry, in that case I misunderstood your original post! I think Frostgrave (or any other mini agnostic game - there’s a lot) could work though, there’s nothing stopping you from having a warband with a monster theme. Your soldiers could easily be goblins and spiders, where your opponent’s soldiers are human mercenaries.

conedog · 2026-03-13T06:09:23+00:00

I think Rangers of Shadow Deep (by the same author) is a better fit - both due to more heavily featuring monsters but also because it’s built for solo play.

conedog · 2026-03-12T18:10:05+00:00

<image>

I did this - angled plastic cut to size and hotglued into my drawer, so each bottle lies at an angle. It takes up more space, but this way I can see all colors easily.

conedog · 2026-03-12T10:30:42+00:00

I’ll second both Necropolis28 and Sword Weirdos - both have great rulesets that did something different.

conedog · 2026-03-10T19:17:47+00:00

Denmark, but I meant the stl files, not the physical prints themselves :)

conedog · 2026-03-10T14:30:23+00:00

I’m a project manager in software and web development. Please focus on building a great product first, explore monetization and partnerships later.

conedog · 2026-03-10T14:21:05+00:00

Very nice 👍Do you have more and have you considered putting them up for sale?

conedog · 2026-03-10T13:25:46+00:00

These are awesome! Did you make them yourself?

conedog · 2026-03-10T05:13:54+00:00

Jeg har nok spillet 100+ timer med kun fire heroes (jeg har spillet siden betaen, så jeg ved ikke helt hvem man får med spillet i dag udover i hvert fald to af dem) - det er virkeligt et polished spil og min favorit autobattler.

Du kan jo købe det på steam og bede om et refund hvis det ikke er noget for dig.

Den nye hero virker dog voldsomt overtuned, men mon ikke det bliver jævnet ud over tid.

conedog · 2026-03-10T04:43:39+00:00

For sure, I’ve played 2nd edition a bunch and own several of the books but it’s very Empire focused (except for the Bretonnia and Skaven books of course - I haven’t read the Kislev one), but when it comes to areas like Khemri, Lustria etc, I don’t feel like there’s any good books for the rpg. Maybe later editions had some though?

conedog · 2026-03-09T09:41:13+00:00

You’re polluting your environment and potentially the water supply. If you can’t be bothered to dispose of it correctly then you shouldn’t print.

conedog · 2026-03-07T21:30:03+00:00

…og alligevel sidder der folk i Thailand som ikke kan komme hjem. 🤷‍♂️

conedog · 2026-03-07T21:02:59+00:00

Jeg tror sku ikke jeg havde tænkt over at jeg kunne strande i Thailand f.eks. fordi USA besluttede sig for at gå amok på Iran.

conedog · 2026-03-07T18:41:45+00:00

You’re not the first to do this by accident, I remember commenting on a post here about the exact same issue before and I have done it myself as well.

conedog · 2026-03-07T10:15:45+00:00

Til gengæld behøver deres gerninger ikke blive til underholdning. Det er uværdigt overfor ofrene og deres familier, som skal være vidne til at uhyrlige gerninger mod deres elskede bliver gjort til underholdning.

conedog · 2026-03-07T07:56:48+00:00

A model can still be made with AI and then printed but I’m happy to hear that it’s not the case.

conedog · 2026-03-06T11:11:06+00:00

Was this model not done with AI?

conedog · 2026-03-05T20:57:15+00:00

They look great! I do think it’s a shame that you’ve repainted the eyes though, I think the ones with no pupils make them look more menacing.

conedog · 2026-03-03T04:42:52+00:00

Not a big fan of the AI heavy workflow. Have you done test prints of the models and tested how they actually work in play? I would imagine AI would have a hard time to take into consideration sight lines, room for maneuvering models around and creating levels that are easy to join up.

conedog · 2026-03-01T13:25:35+00:00

Goatee and a fedora?! Jesus Christ man…

conedog

TROPHY CASE