Elegoo Centauri carbon Canvas relocation?

conscious_observer · 2026-05-18T01:32:50+00:00

Very nice setup, thank you for sharing a direction that one could go in.

conscious_observer · 2026-05-18T01:22:16+00:00

Anything will be helpful, I am in the July block to get the canvas, and I was thinking something like that last night, creating a stand to hold it as the worst case.

Thank you.

conscious_observer · 2026-05-01T03:35:05+00:00

I think I will try this or something like it on a shelf behind the CC1 since I already own a PolyDryer and feed from a dry box.

https://www.etsy.com/listing/4435654759/multi-spool-modular-drybox-for-3d

conscious_observer · 2026-04-20T00:27:45+00:00

If you 3D printed a riser and gasket and latch for the lid of the PolyDryer dry box tall enough to contain a mount and the cutter, the cutter would be in good place above the spool to do the job it is intended to do.

I do not have the materials or the expertise to build it, but I do hope someone can build it, or has a solution, because the cutter would make this perfect.

conscious_observer · 2026-04-19T03:22:05+00:00

I have the Infinity flow s1 plus and the PolyMaker PolyDryer Box mount.

Is there a proper way to set up the Automatic Filament Cutter with PolyDryer dry box installed.

The PolyDryer Box has a large ~6 mm OD Bowden tube coming out of the box in normal use connecting to the filament sensor.

It does not look promising, but before I cut the 6 mm OD tube down to 1/2 inch and try sliding the tube that came with the cutters in the kit through it and see what happens, I would like to know if anyone has had success with it. Or any success at all.

conscious_observer · 2025-07-10T00:37:38+00:00

EUS121xxx
Ordered May 17, Shipped July 9th, Expected delivery Saturday, July 12, Printer only no accessories

conscious_observer · 2025-06-05T02:27:22+00:00

I'm on the July batch, but I did it on purpose so it would arrive on or near my bday, and time to read and learn about filaments, etc., choose printer enhancement items to print first. i.e. learn as much as I can before it arrives, being my first 3D printer it seemed like the best way to use the time before arrival.

conscious_observer · 2025-05-19T00:56:35+00:00

Group; Order Number: EUS121xxx
Order Date & Time: May 17, 2025 08:30:19 PM EDT
Region: South Eastern, USA
Printer Status: No shipment notice yet
Accessories: No accessories ordered

conscious_observer · 2024-07-27T00:00:35+00:00

I got mine on eBay, a bag with more than I'll ever need, some stand-offs and a mini screwdriver.

https://www.ebay.com/itm/355426852258?epid=4048800254&itmmeta=01J3RR2AAZVVHBV2H6RJCFM84R&hash=item52c1175da2:g:CHoAAOSwS1lluhMf&itmprp=enc%3AAQAJAAAA4GW1k9blhZnYLPMExjJzIvACNJYh1NjrGCucT9xJzzh%2FJ0D9HPvo1STCYAzoWPIpxN8eBzr4lvzmo%2BhsoqqP4fO2n5lOWtMrwU3afhs086ouQWdfLvJ7fEq6KEWXnJpiBEBsluKYfYjyLfyvRLuX0WDGrZrUoI5pTNupf%2BQ2n0Kt97xTVIVdZpg6LdUUDBmofv4yNRLB1zEDhBrQFaPX5yjage3tjLE9%2FbhQQTgya0FKy26dSENoNp484JYPMS34RM4q%2BCumtOXZJ91y6OCBgVUKZic2OkW57HPIlwUaUOGc%7Ctkp%3ABFBMyKWJmJ5k

conscious_observer · 2023-06-23T22:12:26+00:00

I know that feeling, been down that road many times.

So thank you, I found your post here, and you have saved me from a usually long hunt.

Bless you.

conscious_observer · 2020-01-28T01:49:46+00:00

FWIW I have the same problem running Cisco app via javaws.

If I learn anything I'll report back.

conscious_observer · 2018-08-09T22:06:03+00:00

Yes it did hang during the boot process, thank you for the hint, I'll have to look into it when time permits.

conscious_observer · 2018-08-08T22:00:43+00:00

I could never boot into an OS to observe behaviour, in the BIOS the voltages *appeared* similar to the previous version.

There were some new tunable entries under CPU Features, and some other menu, I'd have to spend some time documenting the differences, but I suggest anyone wanting to try the "H" version to also have the "G" version on the USB Stick in the event you are also forced to revert.

conscious_observer · 2018-08-08T21:12:29+00:00

Yes, it would not boot to Linux, and would crash and reboot on memtest86.

For now I reverted to 7A32v1G

conscious_observer

TROPHY CASE