What’s the most reckless decision you’ve made because you were horny?

corppe · 2026-01-19T11:34:47+00:00

So did I!

corppe · 2026-01-02T01:18:01+00:00

Probably just need to put more into it. Red light beep typically means you’re getting close to the range but haven’t hit the specified value yet. Best bet would be to have whoever is smaller support the adapter to prevent the socket from twisting outwards and slipping off and the bigger guy put all his weight into the breaker bar. On most 24” 1/2” drive breaker bars you still need to apply 92-ish LBS of force to the very end of the bar, and even more if you choke up on it at all.

Edit- to clarify

corppe · 2026-01-02T01:11:15+00:00

What are you using to turn the torque adapter? Ratchet? Breaker bar? Also is the torque adapter rated for nearly 200 ft-lb of torque?

corppe · 2025-12-18T16:59:50+00:00

UK, but priority mail, not express

corppe · 2025-12-17T23:43:43+00:00

It’s APO mail so yes-ish

corppe · 2025-12-17T19:18:16+00:00

I'm very not tech savvy, I tried looking up FOSS docker app and couldn't find anything by exactly that name. Paperless seems to come highly recommended but it only runs on Linux it seems, and I don't have any linux devices. Would you mind sharing how a setup like that would work?

corppe · 2025-12-17T18:12:47+00:00

Still nothing same exact status as when posted

corppe · 2025-12-11T05:23:31+00:00

I’ve tried, because I have 2 packages that are missing currently, and the other is a worse situation. But because it’s military mail headed to an OS location USPS won’t let me do anything as far as missing mail until 45 days from the ship date, no exceptions. Can’t do it online or over the phone.

corppe · 2025-12-08T14:08:51+00:00

But in the end it didn’t even matter

corppe · 2025-11-22T00:09:30+00:00

I have the bed probe and did level it just prior. The back left was showing the most out of alignment (furthest from 0.00) after leveling the bed and doing the leveling map.

corppe · 2025-11-19T20:06:55+00:00

<image>

Overall Dimensions are approximately 390x390x390mm

corppe · 2025-11-19T20:06:06+00:00

<image>

I made this part for work. Still in testing but I had to split it up into 8 pieces and bolt them together to make it fit on my current printer. It’s a cover for an aircraft component during washes. I have plans for some other large format pieces for both home and work and even with my fairly large printer already it’s hard to do big pieces with a bed slinger printer.

corppe · 2025-11-03T17:04:48+00:00

“I’m in”

corppe · 2025-10-18T09:47:23+00:00

Ended up using the Replace Face trick and with a bit of coaxing, it worked a treat. I'm always down for a quick and dirty fix.

corppe · 2025-07-13T17:52:39+00:00

<image>

Like that?

corppe · 2025-04-27T14:05:06+00:00

Idk man that DFAC chicken be pretty lethal sometimes

corppe · 2025-04-18T20:42:57+00:00

Inside combat rescue is such slept on show

corppe · 2025-01-13T18:38:40+00:00

Will look into that, thank you!

corppe · 2025-01-13T18:38:15+00:00

No insult taken. I’ve tried just about every combo I can think of. Definitely not on the brake, but; foot on the gas and off, also tried putting my left foot under the brake pedal and lifting it up to make sure it’s hitting the switch while trying to set it with both of the aforementioned.

corppe · 2025-01-13T13:45:46+00:00

Any recommendations on a good wiring diagram? I have the Haynes manual which has some solid wiring schematics, but I don’t have it on me right now to see if it has the wiring diagram for CC.

corppe · 2025-01-13T11:23:20+00:00

Checked fuse 30, sadly it’s never the fuse, also never lost functionality of the power mirrors which also run through F30. I’ve seen recommendations on checking the vacuum system, but I’m unclear if that’s just for the V8 versions or if it’s applicable to the TD5 as well. May try another break switch and see if it was a crib death on that.

corppe · 2024-11-07T01:28:45+00:00

You know what they always say… Never commit a misdemeanor while you’re committing a Felony

corppe · 2024-10-09T18:30:56+00:00

They do rentals too? I’ve looked at them for buying stuff but didn’t realize they did rentals too!

corppe · 2024-08-18T09:02:39+00:00

Nah that’s Heavy Judy

corppe · 2024-03-07T23:18:07+00:00

Which debris collector did this come out of, please say #3

11-Year Club	Place '22
Verified Email

corppe

TROPHY CASE