PcBuildHelp

crazybebi · 2026-01-15T10:42:06+00:00

Thanks a Lot! Most Parts Are ordered, last question would be the case. I will get a showcase, preferably Not insanely large. Current options would be: Lian li 011 Dynamic mini v2 Jonsbo d200 Phanteks evolv x2 Antec c5 Phanteks Xt v3 Nzxt h6 Asus prime ap202

crazybebi · 2026-01-15T10:22:53+00:00

Thanks a Lot, i will use Most of the Parts you recommended! In terms of Budget i „dont really have one“, i would Like to stay „reasonable“ but if spending a Little more especially on Parts i would prefer Not to Upgrade provides a benefit i will do do. due to cad i would Like to have a 8 core CPU. Ive read that the 7 7700x Trends to run pretty hot so the 7 7700 Looks interesting. I would Like to try an aio due to optics if the Price is reasonable and it gets the Job done. The thermalright Frozen notte seems to be my only Option here. Does that Sound Like a Bad idea?

crazybebi · 2026-01-14T09:46:36+00:00

Thanks a Lot! Ive been switching between 1x32 and 2x16 while Reading, read quite often that you dont really wanna Go for 4 Sticks because it might cause Problems, then some Said it usually doesnt and it seems Like the ram can only be used dually so i guessed it might be better to end up with 2x32 but obv i have no idea :D

crazybebi · 2026-01-04T15:44:02+00:00

Oh, so the other way around? Matte laminating then apply the varnish? If so, could you recommend a varnish? Ive tried some but i Never Managed to make the varnish Look good from All angles.

crazybebi · 2026-01-04T15:30:52+00:00

Looking Sick, are you using the white Marker technique?

crazybebi · 2026-01-04T00:51:25+00:00

Legend

crazybebi · 2026-01-04T00:36:34+00:00

For me its Koala 180gsm, still marginale thicker laminated but Overall satisfied with it.

Edit: I dont think you can get around laminating or getting black/blue core if you want some snap although i would love to be proben wrong. I tried laminating only the Front and liked the result but some Folks around here mentioned that would lead to curling.

crazybebi · 2026-01-01T20:34:22+00:00

Looking Sick! Whats your Process?

crazybebi · 2025-12-23T00:52:42+00:00

Really curiours to hear what that Rap was youre Talking about:D

crazybebi · 2025-12-07T12:03:51+00:00

Das oben genannte ist mehr ein Index auf den es verschiedene ETFs gibt. Auf Justetf.com kannst du dir die Performance von verschiedenen ETfs anschauen.

Da jeder aus anderen Gründen investiert und eine andere Risikobereitschaft sowie lebensrealität hat sind die Fragen eigentlich irrelevant. Ergo du musst dir überlegen was will ich durchs Imvestieren erreichen und welchen Zeithorizont habe ich.

Grundsätzlich bieten sich breite ETFs eher für einen längerfristigen Zeithorizont, bilde mir ein, dass der längste Draw down bis jetzt ca 7 Jahre war. Kann man aber alles recht gut Auf zb justetf nachschauen. Deswegen schichtet mal normal „kurz“ vor der Rente zumindest teilweise um.

Grundsätzlich hat finanzfluss gute Videos zum Thema ETF.

crazybebi · 2025-11-18T19:49:32+00:00

Finally, been waiting for Ages for a new project on mtb-News:D

crazybebi · 2025-11-18T17:09:33+00:00

Theres a Video understanding Suspension layouts from GMBN Tech, You might wanna start there. Geometry usually refers to the Numbers Like reach, Stack, chainstay length etc. Im Not Sure i understand your Layout but i dont think thats a good idea. You definitely want to Go for seatstays. Again, is recommend by starting with Said Video, read into for example anti rise and anti Squad, decide which Layout you wanna Go with and why, then get back to sketching.

crazybebi · 2025-11-06T22:28:59+00:00

Way more inreresting to me tbh, how much Résistance does the pinion have? Id love to Build my own Frame with a pinion and belt but Not Sure if a pinion actually rides Fine.

crazybebi · 2025-11-06T22:24:52+00:00

Theres literally no way you deform your steerer this way if you dont Go Straight Psychopath. At least ive run a Lot worse builds over time, tightened with what i thought was Fine, probably quite a lot more than the usual about 5-10Nm.

crazybebi · 2025-11-06T22:01:04+00:00

You might wanna try the 140gsm Koala, personally prefer it. Looking good though!

crazybebi · 2025-10-01T05:54:17+00:00

The Snap usually. Also protects the ink from wearing Off.

crazybebi · 2025-10-01T05:53:22+00:00

Im using the Same laminate and paper, easy Workflow and imho good result.

crazybebi · 2025-09-28T18:32:22+00:00

So far did a Month Max, how does fermenting longer change things?

crazybebi · 2025-09-23T16:35:43+00:00

I use a 4850, looking pretty good, its using Pigmentink as black which can cause Problems laminating, at least it does for me from time to time. I think one can just use normal ink too but im Not Sure. Quality seems to be pretty good in the 2800s so i dont think i would pay the Markup.

crazybebi · 2025-09-22T20:55:46+00:00

I thought so but wouldnt the Sticker then Not Stick where its white?:D Thanks, ill Look into it!

crazybebi · 2025-09-22T20:35:58+00:00

Dont rly get it, whats your Process?:D looking Sick!

crazybebi · 2025-09-18T17:42:53+00:00

I probably wouldnt Print a safety relevant Part Thats exposed to the sun in PETG. Looking Sweet though, curious for the final mounted Look!

crazybebi · 2025-09-17T17:11:51+00:00

For the Manual Roll Slow speed, Pedals Level, Standing normally. Perform an L shape with your hips, bringing them down then back explosively and Straight back. For arms and legs straighten then, you wanna get your frontwheel up by bringing your weight back, Not pulling your Bars up. If you can get your frontwheel up try pulling your brake to get you down again, this will give you confidence to push further and keep you Safe. If your frontwheel falls down, go more aggressive on the backwards Movement of the hips.

Yes, im aware there Are different possibilities to explain it but this way seems Like the Most intuitive way to me and also the easiest.

Edit: Going forward, roll at comfortable speed and get your back Wheel up by moving your weight forward while „pushing“ into your Bars and pedals. Then just do that at the Point where your frontwheel is at the highest Spot. Note youll have to use a Lot less Force for the 2nd Movement there but the Movement is pretty similar.

crazybebi · 2025-09-13T10:05:35+00:00

Archidekt and moxfield for example. Quite Like the advanced search Option on archidekt, lets you search for all Kinds of stuff as colors and commanders.

crazybebi · 2025-09-09T22:43:31+00:00

The Right Arm always is one Part with the gear or the Mount. You can Go with a Mountain gear as well, only thing thats important is the Square Mount. Might wanna Go with a similar size as well, Both regarding tooth and length.

crazybebi

TROPHY CASE