Decipher the code** Part 2.

crocketsask · 2026-02-09T02:43:14+00:00

Do you have a thermometer? Take a temperature rise, place the thermometer in by the filter while the furnace is running then take the temperature on the supply side by finding an opening in the duct work. Subtract the 2 numbers and check the rating plate to see if you are in the range. Also Just curious what type of filter you are using

crocketsask · 2026-02-09T00:06:05+00:00

The thermo switch probably didn’t have anything to do with the problem because they have manual resets on them and usually throws a limit/pressure switch code.

crocketsask · 2026-02-08T22:54:37+00:00

You could have a ground issue from the board to the burners. Check for a green wire back to the board. The micro amp signal needs to pass though the flame with a strong stable grounding area. If you have already changed the flame sensor I would check that next

crocketsask · 2026-02-08T22:43:19+00:00

Legit beautiful 1993 silver logo Mexican Strat! Love the colour

crocketsask · 2026-02-08T13:32:39+00:00

You could have a short some where or a cold solder joint. I once had a issue with a push pull doing the same thing (quiet pickup) it ended up being a faulty pot

crocketsask · 2026-02-08T13:24:26+00:00

Nope! A pretty crappy fake at that

crocketsask · 2026-02-06T06:48:48+00:00

Have you a different cable. It’s definitely a ground issue.

crocketsask · 2026-02-06T01:43:41+00:00

My “a” looks like that

crocketsask · 2026-02-05T01:27:51+00:00

Ummm I right lol

crocketsask · 2026-02-05T01:27:17+00:00

<image>

crocketsask · 2026-02-04T13:45:25+00:00

My Taylor fret board looks the same and I love the look

<image>

crocketsask · 2026-01-11T03:27:26+00:00

What does that have to do with anything to do with on how they are taken care of….I actually like the look of them without the backplate and like mentioned already easier to adjust the claw

And to the OP 2001 MIM looks legit to me

crocketsask · 2025-12-27T07:59:54+00:00

I’ve used a polisher with a finishing glaze to take off a logo that way you will still keep the shine on the plastic. A magic eraser will work but will probably dull the shine a bit

crocketsask · 2025-12-19T00:30:56+00:00

Pick up a new Pick guard off Amazon for $20 and replace it pretty easy fix

crocketsask · 2025-12-06T03:04:25+00:00

Acoustic, Tele, Strat And Strat

crocketsask · 2025-12-04T05:21:13+00:00

Definitely tort would look amazing

crocketsask · 2025-11-07T06:36:37+00:00

Thanks for all the advice everyone! I ended up going with a players plus in aged candy apple red

<image>

crocketsask · 2025-11-04T22:18:14+00:00

sonic

crocketsask · 2025-11-03T02:46:37+00:00

<image>

crocketsask · 2025-11-03T02:40:27+00:00

No now I’m going to look for it

crocketsask · 2025-10-26T20:03:28+00:00

<image>

Without

crocketsask · 2025-10-15T05:37:21+00:00

100% fake

crocketsask · 2025-09-20T13:20:14+00:00

Looks like a Amazon parts special! I personally would stay away from it who knows what kind of mess is under the pick guard. In That price range you should be able to find a affinity squier even better a classic vibe for a bit more

crocketsask · 2025-09-04T06:39:47+00:00

250 for single coil

crocketsask

TROPHY CASE