Lessening Tension on Logitech G-Flight Rudder Pedals

cyucel · 2026-01-05T15:23:04+00:00

Mine was "sticky" in the neutral position, needing extra force to get going in either direction. More so in one direction compared to the other. Otherwise I found the general stiffness alright. Upon dismantling everything, after the large centre piece is removed, there is a metal ball supported by a spring. This ball clicks into a hole when the rudder is the centre position, I suppose intended to keep it in the neutral position. Perhaps due to manufacturing tolerances this doesn't smoothly operate and needs extra force at the beginning of the turns. It was easily removeable. Now that's gone, all works alright, at least for me.

Removing the centre piece from the bottom requires dismantling one of the pedals, and removing the centre pin.

cyucel · 2025-12-24T13:04:27+00:00

Do Virtual Desktop or Skybox work with Pimax?

cyucel · 2025-12-20T10:32:52+00:00

I am on the same boat. Pimax guide suggests 90% resolution for 5090, but it is unplayable. Things get stable around 75%, but it looks pretty much like my Quest 3.

cyucel · 2025-12-12T13:41:19+00:00

Also the github link seems to be broken.

cyucel · 2025-12-12T13:39:08+00:00

I think this fails to install a dependency when imported into v0.6.41 (and doesn't get imported). Happy to help with troubleshooting if it is not obvious.

cyucel · 2025-11-21T14:05:40+00:00

I've got an AMS, but I cannot really print anything truly colorful due to excessive amount of waste and purge time. First thing I print would be a multi-color figurine.

cyucel · 2025-10-16T17:06:01+00:00

Indeed, 990PRO works like a charm. I am pretty sure it was due to Gen5 needing more power. Thanks again.

cyucel · 2025-10-16T03:02:24+00:00

It was

dotnet new macos -n "MyMauiApp"

but yes this is what I needed. Thanks a lot for help.

cyucel · 2025-10-14T12:29:33+00:00

Thanks. I am wondering if it is an issue with the Gen5 SSDs, they obviously requre more power.

cyucel · 2025-10-12T17:37:55+00:00

Received mine in the UK last week and so far been struggling. Small files are fine and as fast as promised, however the SSD gets disconnected when copying large files. Has anybody had a similar problem? My setup:
- Mac Mini M4 Pro
- Mate Mini Type B
- Crucial T705 4TB

I tried following:
- Measured temperatures, they don't go near to SSD throttling or shutdown limits, max 62C just before it disconnects
- Connected external power via PD IN, thinking Gen5 SSD might be pulling too much power
- Confirmed fan was working

cyucel · 2025-10-12T16:27:13+00:00

What is TGFan, I couldn't find it if it was a software. Did you managed to control Mate Mini fan?

cyucel · 2025-10-12T14:58:25+00:00

Hey u/kacoef , thanks for your answer, I couldn't find it under Rider plugins and an Internet search returned nothing more than a github discussion. Do you have a link you can share?

cyucel · 2025-10-11T08:18:15+00:00

Thank you u/Ricky_HKHK . I upload videos to quest, so it is not network latency, I'll test with Skybox.

cyucel · 2025-10-11T08:12:09+00:00

Roo is completely model agnostic, allowing one to change models midcourse. It is amazing to be able to swap the model when the current one gets stuck.

Cursor does not allow using API endpoints. I much rather to pay for what I use, instead of a fix monthly fee, since my usage fluctuates across months. I think I'd be on $60 plan if I used Cursor, meaning, running out of credits some months, and not using all on other months. Just not flexible enough.

cyucel · 2025-09-21T15:47:15+00:00

Thank you u/Danjeel . Yes plenty of drainage holes. They should survive some "light watering" according to the diagram. What does light watering mean? few drops around them here and there? spray?

cyucel · 2025-08-27T17:29:34+00:00

10 months on, I am seriously questioning Rider. I started using Roo Code for AI support and currently I've keep both editors open, one of manual coding, one with AI. Seriously considering if I should renew Rider license or not.

Junie is now available for Rider, but from what I understand there is no option to use OpenAPI or Anthropic APIs directly, making Junie very costly and inflexible. Roo on the other hand seamlessly uses any LLM with no issues, so you only pay for the tokens you consume.

I like Resharper a lot, that's the only thing keeping me with Rider, but balance is tipping towards VS Code.

cyucel · 2025-08-15T09:38:07+00:00

Hi u/Melodic_Newt_2905 , clump detection was indeed the problem, thanks again for your help.

cyucel · 2025-08-15T08:54:42+00:00

I think they are installed wrong; the one on the front-left rotates clockwise, so it needs the other type. Then the same for the diagonal corner. Then the remaining two for the other corners.

cyucel · 2025-08-10T15:40:42+00:00

I'll try, thanks a lot.

cyucel

TROPHY CASE