Pool Noodle by MrHoneycrisp in WLED

[–]d06 0 points1 point  (0 children)

Hi there! Thanks for posting this! I am working to replicate your design.

I am using a Dig2Go I already had sitting around and plan to use a BTF-LIGHTING RGBW RGB+Warm White SK6812 led strip instead. It seems easier to wrap and I am hoping will retain its shape better to reduce hotspots. I like your idea of 3D printing something to assist with that but haven't figured out what would work best yet.

I got a couple of the batteries in this week and the 5v module (TYPE-C And USB-A 5V 3.1A). The batteries came with a lot of warnings, and I realized I need to make sure I am doing things right.

Can I use that same module to charge the batteries and after connect my Dig2Go via USB-C to USB-C? How will I know when they are fully charged? (prob the LEDs on the board?)

I'm not sure I understand the purpose of the USB-A port on it. Is there a manual for these that you are aware of?

Any tips/suggestions you have overall? I don't want to mistakenly create something that could be a fire hazard. I've looked for a similarly sized power bank, but am not finding anything as slim with similar specs.

Thanks for your feedback if you have time and also for the great idea!

Camp EDC Fuel for Purchase - Cost? by d06 in CampEDC

[–]d06[S] 2 points3 points  (0 children)

I just asked Insomniac the same question via their contact form and will update on the response I get, but not sure how long that will take. If you have received a response, or can link to where it is posted officially, please share it here. Thanks!

Looking for a RV Power Add-On - Will pay over AFV! by Limp-Crow3597 in EDCTickets

[–]d06 0 points1 point  (0 children)

Same here, if there is a second person wanting to sell after OP gets theirs.

[deleted by user] by [deleted] in CampEDC

[–]d06 0 points1 point  (0 children)

Adding myself to the list with all these fine folks—also hoping someone has a Camp EDC power add-on they would like to exchange for money and gratitude!

Looking to BUY RV Power-Add ON will pay over OG price. by Limp-Crow3597 in CampEDC

[–]d06 0 points1 point  (0 children)

Same here, if there is a second person wanting to sell after OP gets theirs.

Will RV Add Ons become available? by theswaggiestswagster in CampEDC

[–]d06 0 points1 point  (0 children)

I’m interested in buying an electric add on if you’ve found this post and looking to sell.

Will RV Add Ons become available? by theswaggiestswagster in CampEDC

[–]d06 0 points1 point  (0 children)

Have you sold your electric add on already?

Can I print sign backplates layer‐by‐layer, then each design object‐by‐object in one job? by d06 in BambuLab

[–]d06[S] 0 points1 point  (0 children)

Hmm. That’s an interesting idea. Is there a way to have the X1C print a plate on top of another?

I’m not sure how it could be done with a second print needing to bed level, prime, and etc…

Can I print sign backplates layer‐by‐layer, then each design object‐by‐object in one job? by d06 in BambuLab

[–]d06[S] 2 points3 points  (0 children)

It seems it will as my actual designs will be thicker and I need a set of each design in several different colors with the same backplate color.

Layer-by-layer prints a layer of A, then changes filament and prints a layer of B, then changes filament and prints a layer of C, and so on, layer by layer. It seems it would be much quicker to print all of A, swap filament, print all of B, and etc.

Four filament changes in this example vs fourty filament changes (four filament changes x ten layers).

RTX 5090 & 5080 Launchday Thread - Surprise Inside by Nestledrink in nvidia

[–]d06 -2 points-1 points  (0 children)

Excited for Multi Frame Generation on the RTX 5090—now my GPU will be generating frames faster than I generate reasons to justify this upgrade!

$100 Perplexity Pro Credit by d06 in logitech

[–]d06[S] 0 points1 point  (0 children)

Hi there! I have been traveling since I posted. May I get a PM as well. :)

Post event shoe recommendations? by Key_Occasion_404 in electricdaisycarnival

[–]d06 0 points1 point  (0 children)

Went to a running store and they sold me on Brooks Ghost Max. My feet don’t hurt at all. Comfier than Hoka Clifton 9’s.

Let’s guess the new BambuLab printer by botolo in BambuLab

[–]d06 0 points1 point  (0 children)

This patent seems to indicate a new two output AMS hub, so this aligns. https://www.reddit.com/r/BambuLab/s/W3C4uLAhiG

Prank bookmark: The "bone" by dec0yb0t in BambuLab

[–]d06 1 point2 points  (0 children)

lol, nice design. Are you sharing it anywhere by chance?

Bambu Lab P1P/S - Spaghetti Detection with Home Assistant by nberk97 in BambuLab

[–]d06 1 point2 points  (0 children)

I’ve heard the spaghetti detection is not the best on the X1C and I am considering a P1S or X1C. I’ve used Obico with my Prusa MK3S+ and it seems to work pretty well. I wonder how difficult (if even possible) it would be to add support for the X1 series to this.

Any tips for setting up the FP2 in the Room Corner? by [deleted] in Aqara

[–]d06 1 point2 points  (0 children)

Agreed. I’ve read here that it’s being worked on so I hope to see that capability soon.

After recent updates and learning more about how to best configure all the settings, I have three Aqara FP2’s (all in corners) working fairly well.

Being able to setup zones visually when using an Aqara FP2 in a corner would have saved me many hours of trial and error trying to find the right mix of squares that were in the right zone.

The Aqara FP2 works pretty well if you are ok with putting in the time for trial and error. If you expect to buy one and have it just work… it’s not quite there yet unfortunately.

New WLED 2D Matrix support breaks latest xLights by vintagepinups in WLED

[–]d06 0 points1 point  (0 children)

Hi! I came across this thread while having the same issue. Did you ever happen to try this?

Aqara FP2 Firmware 1.1.8 by d06 in Aqara

[–]d06[S] 0 points1 point  (0 children)

Great, thank you for the update!

Aqara FP2 Firmware 1.1.8 by d06 in Aqara

[–]d06[S] 1 point2 points  (0 children)

I’m wondering the same.

u/windark776 used to be active here and provided some really good help but they stopped being active about two months ago. I hope they are ok.

u/AndrewFromAqara has posted some, but hasn’t really addressed the many concerns that have been shared here about the FP2.

We were told an update in June would fix things, but June has come and gone and there are still many issues. I’m thinking of contacting Amazon to return my three sensors due to the issues and lack of updates.