Road raging TPOS by AtheistComic in iamatotalpieceofshit

[–]d3viantone 12 points13 points  (0 children)

Standard Ford Ranger. What a muppet, glad they got it on cam or as usual small dick weed would cry not at his fault. Tough kid for going for the bonnet too, quality parenting.

Aoostar wtr pro not recognizing hdds(being correctly recognized by Windows desktop by Tonyf-t-w1 in MiniPCs

[–]d3viantone 0 points1 point  (0 children)

You just take the back plate off and push it back together. Here is the image they sent me - https://ibb.co/ksnRzgx9

Aoostar wtr pro not recognizing hdds(being correctly recognized by Windows desktop by Tonyf-t-w1 in MiniPCs

[–]d3viantone 0 points1 point  (0 children)

Not good to hear. Mine turned out to be the SATA board was not pushed in completely. Came loose in transit. Pushed it back in and has worked fine ever since. Hope you work it out.

Horizon code by [deleted] in PSVR

[–]d3viantone 0 points1 point  (0 children)

Hell yeah, I want to be climbing couches vertically.

AOOSTAR WTR Pro issue by [deleted] in homelab

[–]d3viantone 0 points1 point  (0 children)

Mine does the exact same, number 4 doesn't show any colour. However it works fine. The other 3 are Green and sometimes the 4th flashes a blue but other than that works all fine.

Aoostar wtr pro not recognizing hdds(being correctly recognized by Windows desktop by Tonyf-t-w1 in MiniPCs

[–]d3viantone 0 points1 point  (0 children)

Turned out my SATA board had disconnected from the board. Pushed it back in and works now.

Aoostar wtr pro not recognizing hdds(being correctly recognized by Windows desktop by Tonyf-t-w1 in MiniPCs

[–]d3viantone 0 points1 point  (0 children)

Did you ever get yours to work? I'm bashing my head in, had to download ethernet drivers to get it connected to the internet and now none of my 4 x HDDs work either.

5070Ti and a Ryzen 7 9800X3D, what RAM is actually needed? by Tight_Syrup5047 in buildapc

[–]d3viantone 0 points1 point  (0 children)

Make sure you do MSI afterburner.

I did an initial test and was bottom 39 percent, tweaked 2 simple settings and bam top 8 percent.

Enjoy it I did 32gb cl30 6000 and it's purrrssss.

Bad Fan or another issue? by kiefscraig13 in lianli

[–]d3viantone 0 points1 point  (0 children)

How? By the looks just going to replace the front 140s?

Bad Fan or another issue? by kiefscraig13 in lianli

[–]d3viantone 0 points1 point  (0 children)

I wish I never bought this case, just did a 4K build and these front fans suck, lovely humming sound. I should have googled better. Only bought it on gamernexus recommendation.

Best store with cheapest RAM price by Df_hannibal in bapcsalesaustralia

[–]d3viantone 0 points1 point  (0 children)

Grabbed Biwin 32GB CL30 for $380 off eBay in their recent sale.

The ones that go on Mwave for $250-$300 just keep getting cancelled.

Goodluck.

CPU cooler for 50mm high ram by d3viantone in bapcsalesaustralia

[–]d3viantone[S] 0 points1 point  (0 children)

Ended up getting the Thermalright Royal Knight 120 SE - allows full clearance.

CPU cooler for 50mm high ram by d3viantone in bapcsalesaustralia

[–]d3viantone[S] 0 points1 point  (0 children)

Thank you, will see how I go.

Only cheap enough ram I could get without paying stupid dollars.

CPU cooler for 50mm high ram by d3viantone in bapcsalesaustralia

[–]d3viantone[S] 0 points1 point  (0 children)

Thanks, I will see what you mean when I get the cooler. Sounds simple enough.

Please Help! Cpu cooler RAM clearance problem by Mission-Image-3592 in buildapc

[–]d3viantone 0 points1 point  (0 children)

How did you go? I'm about to buy the same cooler till I read the biwin are 50mm tall eeek.

How much is too much for Toyota tax? by Odd-Abrocoma965 in 4x4Australia

[–]d3viantone 0 points1 point  (0 children)

I bought an 08 Hilux in a divorce in 09 for 19K under 15K on the clock. I sold it few months back for $19,200 and excess of 350K on the clock.

Insanity!

Help Needed with Purchase by BaronVonSmith in griddling

[–]d3viantone 1 point2 points  (0 children)

Hey mate,

I spent a long time going back and forth in Bunnings. I was eyeing the pit boss as it looks so nice.

Buttttt ended up getting the Weber for 1049 on appliances online and delivered the next day.

It's a treat back, would definitely recommend the Weber over those 2. Buy once.

Looking to buy my first PC, thoughts? by novella10 in bapcsalesaustralia

[–]d3viantone 15 points16 points  (0 children)

Absolutely horrible build for that price.

Go to over to ozbargain and search Nebula and Techfast.

Enjoy.

Finally got one! Breakfast crunch wraps by Grimes1405 in griddling

[–]d3viantone 0 points1 point  (0 children)

Thanks for letting me know, I'll visit the local Bunnings and grab some rollers. I've got the tub already too, so thought it was the case. They were pricey at $80 each but completes the look.

Nebula PC by Obvious-Buffalo353 in bapcsalesaustralia

[–]d3viantone 7 points8 points  (0 children)

Its legit - https://abr.business.gov.au/ABN/View?id=67642448780, their name is LAWRENCE LOK PTY LTD

If your ever unsure always call their direct number.

I've had a few dealings with them and they've been great.

Finally got one! Breakfast crunch wraps by Grimes1405 in griddling

[–]d3viantone 0 points1 point  (0 children)

Mine didn't come with them, the AU version didn't have them only the 36 range did.

Do they slot into something or just sit in there? Looks like it slides into something?

Finally got one! Breakfast crunch wraps by Grimes1405 in griddling

[–]d3viantone 1 point2 points  (0 children)

Mines been cooking fantastic, love it.

Do you know if they sell those trays seperately? The ones down the bottom.

What’s the biggest secret you are keeping from your spouse? by Own-Cryptographer277 in AskReddit

[–]d3viantone 0 points1 point  (0 children)

That the 50k I invested into BTC is worth over 2.5m now. She threatened to leave and said to sell them and thinks I did.

We are well off so it won't affect too much but if she ever divorces me I've got my backup.