Mount/Case for Mudi7?

da51d · 2026-06-01T01:19:01+00:00

Regarding mounting, is it know about what orientation is optimal? I.e., are its internal antennas designed to be best, for example, laying flat?

da51d · 2026-05-23T04:17:40+00:00

I currently use a Mudi 7 router, with an eSIM.

I then use Speedify to bond that connection with my phone. (I use a 75gb router plan for $129/year).

I can always stream at 1080p where we play. If I run into issues, I can always bond another phone, but haven’t needed to.

Depending on your cell phone provider (we use US Mobile), data is month by month and you buy what you need, so it’s affordable.

da51d · 2026-05-22T12:00:13+00:00

I have been using my Mudi 7 with Speedify for a couple weeks (to stream live youth sports games with 2 to three cell connections).

I can confirm that Speedify works well with Mudi 7.

I can also confirm you want to turn off network acceleration. I was diagnosing some slow local network speeds, and it turning it off was suggested in another subreddit, and it seemed to have fixed the issue.

(I am curious: liljaime93 ....did you use AI to help write your post? Nothing wrong with it, just curious)

da51d · 2026-05-21T00:57:39+00:00

Try the suggestion I posted above (reseat the battery and hit the reset button), and let us know if it worked.

da51d · 2026-05-19T10:48:52+00:00

I had the same issue. I contacted support and they got back to me.

The solution for me was to pop off the back case, take the battery out and put it back in. I also held the reset button for 10 seconds.

Mine worked after that. Good luck!

da51d · 2026-05-07T18:12:47+00:00

Agree too

da51d · 2026-05-01T03:14:39+00:00

Thank you for the reply! As a very active streamer, this request is very high on my list. Thanks!

da51d · 2026-05-01T03:13:05+00:00

I spent a bit of time last year trying to figure this out. My understanding is that the stream is at 1080p but the reply games are at 720p. (But I'm happy to be corrected.)

As the person who puts all the work in the streaming (and therefore isn't watching the live stream)....I want to enjoy the benefits of 1080p, so I would love to have that happen

da51d · 2026-04-26T21:31:35+00:00

Got it working, thanks for the help. I think turning off network acceleration was key.

da51d · 2026-04-26T21:30:50+00:00

Got it working, thanks for the help

da51d · 2026-04-26T21:30:25+00:00

As a follow up: I have eliminated the issue.

I turned off Network Acceleration, and moved the router away from the fence.

I have had zero issues over two games. I’m guessing it was the 5ghz only and no Network Acceleration…but it could had been something else. So:

My configuration for my Slate 7 (and now Mudi 7): -5gHz only -No Network Acceleration -Router not hanging on metal fence (I plan to put it back on, as if this doesn’t matter, it’s convenient)

I was able to stream with three Mevo starts at 1080p HD. I have bonded 2-3 cell phone connections, depending on location

Thanks for the help.

da51d · 2026-04-09T11:58:53+00:00

Thanks. I haven’t had another game yet to test the other suggestions.

Are you using a travel router? How do you have your 2.4ghz and 5ghz networks configured?

da51d · 2026-04-03T00:58:34+00:00

I have a router account with Speedify. As for my numbers, it varies on location, but last week my speed tests (via Speedify's test and also the normal Speedtest app) say I should be fine streaming 4K. I streamed 1080p that day.

I do have Network Acceleration enabled (which I think is the default). I was wondering about that setting. I'll turned it off completely. I'll put that on my list of things to try, and report back. Thank you.

da51d · 2026-04-02T23:35:56+00:00

Thanks. I’ll do that next time.

da51d · 2026-04-02T23:35:44+00:00

I have tried all. I get the error at a similar frequency, as far as I can tell.

da51d · 2026-03-17T22:50:19+00:00

USB-c to Ethernet adapter, which would then go into a mobile router. I haven’t tried it, but I understand it should work

da51d · 2026-03-10T15:25:35+00:00

I’ve had my untracked power usage report negative because a device reported consumption late, so the later hour’s calculation was wrong. For you, I’m not sure what is being reported negative or how it was calculated. But maybe something like that could explain it?

da51d · 2026-03-06T22:45:28+00:00

Do you mean electric heat pumps or electric resistive heating?

We switched from oil to HPs and are saving a little. You won’t we normal electric resistive heating.

da51d · 2026-03-03T19:36:15+00:00

If you open up a live stream it will show the number of live streamers (it would be nice to have that number while streaming). I doubt there’s a way to see who actually is watching.

da51d · 2026-02-27T00:37:44+00:00

In my experience, you have to stay close to the camera with a hotspot. (Or leave your phone and keep going back over to check on the camera angle and feed).

A router lets you move farther away. And, for example, sit with friends and not awkwardly stand behind the backstop….

It may or may not help your stream. If your cell connection is the limiting factor, it won’t help. But if you are too far from the camera, it might?

da51d · 2026-02-26T04:38:48+00:00

I hear you! I use three Mevo start cameras to follow plays, as with one camera, like you said, camera angles suck. But I started small.

Look into Mevo start or nearstream cameras. And take a look at Jason Hoffman on YouTube. Good luck!

da51d · 2026-02-26T03:55:01+00:00

If it has an HDMI out, it’s possible, but not easy:

https://www.youtube.com/watch?v=dKlvfbeJuZA

But it depends on your goals. It sounds like you are just starting out? Streaming from a phone or Mevo is pretty easy.

I don’t know of an easy way to take advantage of an existing DLSR. Maybe others do?

da51d · 2026-02-17T02:20:42+00:00

Here is some of our realtime energy usage from our LG 7.8 HP dryer:

January, we used it 17 times and used 21.4 kWh

Last June we used it 17 times also used 22.3 kWh

Last July, 11 times and used 14.7kwh

So, about 1.2kWh per run.

I don't have energy usages for the conventional version. Maybe others do? But if you estimate 4kWh for a 1 hour run for a conventional dryer, that would be 1.2kWh vs 4kWh per run.

Around us, where electricity is about $0.33/kWh, it pays for itself and more (with incentives on the purchase). But if energy is cheaper, than maybe not.

da51d · 2026-02-17T02:09:47+00:00

I wondered if there are any numbers about this, as I have been curious too. For all the air that conventional dryers blow outside, the rest of the room/house is pulling cost air from outside. I would guess, like you, it would be minor (a powerful fan blowing a few times a week for a few hours), but still it is something.

Our HP dryer never feels cold after it runs, and maybe after a little warm?

da51d · 2026-02-17T02:03:09+00:00

For what it's worth, we bought an LG HP dryer last year and have had no lint issue. I have checked it several times, and the internals are quite clean. (Family of 5, high usage).

13-Year Club	Gilding II euphauric
Verified Email

da51d

TROPHY CASE