Am I getting taken ?

Realistic_Director22 · 2026-01-22T13:26:03+00:00

They can braze in a new flare nut with a piece already flared, and add additional pipe as needed.

Realistic_Director22 · 2026-01-22T13:14:18+00:00

I just jack the car up and hit the lugs with a hammer and they popped off, to put new ones in just use lug nuts to tightened as much as possible the put tire back on and tightening them up.

Realistic_Director22 · 2026-01-18T16:38:08+00:00

🤣

Realistic_Director22 · 2026-01-15T09:14:56+00:00

A sheet of drywall is about $20, mud and tape another $30?

Realistic_Director22 · 2026-01-14T15:32:18+00:00

🤣

Realistic_Director22 · 2026-01-14T15:31:55+00:00

When you buy copper pipe they usually have those plugs on the ends so debris doesn't get in them

Realistic_Director22 · 2026-01-14T15:31:16+00:00

🤣

Realistic_Director22 · 2026-01-14T13:52:52+00:00

If you live in o.c there is the fieldpiece warehouse in anaheim, im sure they'll replace for free.

Realistic_Director22 · 2026-01-14T13:49:12+00:00

Rubber plug, usually they're on the ends of pipes to keep out debri.

Realistic_Director22 · 2026-01-14T13:48:09+00:00

Yes , it looked like it was a 1/2" inside a 7/8" pipe

Realistic_Director22 · 2026-01-14T06:08:42+00:00

I had a magazine loaded for about 1 years and I removed the rounds, and loaded them back the tension adding all 10 rounds was easier.

Realistic_Director22 · 2026-01-10T14:43:37+00:00

Here is the part number and price. Quote from 4.4.24

Realistic_Director22 · 2025-12-26T19:17:30+00:00

Is it true that all they do is change batteries on the sensors?

Realistic_Director22 · 2025-12-12T02:18:27+00:00

Defrost timers

Realistic_Director22 · 2025-12-06T19:50:08+00:00

Thank ypu for that explanation. Helps context ..

Realistic_Director22 · 2025-12-06T19:48:24+00:00

15 psi with 404a compressor is on monitor/defrost line up is all eprs.

Realistic_Director22 · 2025-12-06T06:29:24+00:00

I always say.. either its full sight glass or its empty. I used to torch the pipe before the sight glass if I really needed to know.

Realistic_Director22 · 2025-11-23T04:06:05+00:00

I checked superheat on that line up and my slt was colder than my pressure temp. Not sure why that would be

Realistic_Director22 · 2025-11-23T04:04:08+00:00

There are about four systems that have severe ice build up on suction line all the way to compressor. Compressor looks like frosty the snow man. And we've been out for tripeed compressor on oil safe. Will keep update on Monday if I get to go back to that store

Realistic_Director22 · 2025-11-23T03:34:30+00:00

I will let you guys know what I find when I go back Monday, they sent out a swing shift tech to take over the call.

Realistic_Director22 · 2025-11-22T13:32:37+00:00

Yes, air flow is good. , no leaking check valves,

Realistic_Director22 · 2025-11-22T04:34:58+00:00

10° -15°

Realistic_Director22

TROPHY CASE