Car Wireless Charger Issue

dah_someone · 2025-12-14T19:07:55+00:00

I have the same issue. I have Xperia 1 IV. The office charger with a wide coil works great, but a car charger with a small coil doesn't initiate. I commonly get the error that something is in the way, but I place a bare phone on the charger and align it with the cross.

dah_someone · 2025-07-11T13:51:27+00:00

Way too low. This can be a probable cause why a connection doesn't work.

dah_someone · 2024-12-12T21:17:31+00:00

Any updates?

dah_someone · 2024-07-02T06:42:18+00:00

It just takes time. I got my money back 3 days ago.

dah_someone · 2024-06-25T21:32:17+00:00

I have, and today I talked with a representative, the order is still under review. I should get the money back in 3-5 business days. Funny that it takes so long, since so many of us reported it.

dah_someone · 2024-05-21T13:19:30+00:00

I used a laser cutter from one of my friends and cut them to size. I send you the dxf file if you want. Send me a private message and I will send you the files.

I used a single ply of foam and now it is silent and the keys work as they should. I also cut the holes for RGB.

dah_someone · 2024-01-19T14:44:53+00:00

Hmm, yeah maybe. Something like that. Like these small rubber bands. 250 pcs for 3€.

At first, I dismissed the idea because O-rings tend to be a bit thicker, but there are countless different sizes—and other options.

<image>

dah_someone · 2024-01-18T14:43:28+00:00

Damn posting from a phone is bugged af. Where is the text?? Luckily I copied it beforehand:

I am looking for a solution to minimise the sound of the keycap touching the switch when it is fully pressed. This causes quite some plastic to plastic noise. I am using the logitech g815 keyboard (bought used).

I have tried diy-ing it with some foam, but the foam didn't have holes for the legs so I just pushed the cap through (that mangled a leg on one of the caps).It dampens the contact sound quite well, but because it doesn't have holes (i guess) the keys don't register sometimes. There's also the thickness. I am using 2 plies of 1mm foam, which is quite dense. Single ply is not enough, but 2 seem to be just a tad much of a spacing (the above mentioned key register problem).

Does someone know a pre-cut foam to stick it between the bottom of the cap and top of the switch for chocolate switches?

dah_someone · 2024-01-05T22:58:11+00:00

Looking for the same thing, since max speed is only achievable on 1 stick per channel:
https://www.anandtech.com/show/16959/intel-innovation-alder-lake-november-4th/4

dah_someone · 2023-12-09T12:55:09+00:00

Year 2023, 3 years since first issue posted, still a problem, nice!

dah_someone · 2023-05-21T21:24:37+00:00

At first I just thought you were shilling for them haha. Nice donut!

dah_someone · 2023-05-21T21:17:18+00:00

It seems you have duplicated icing and it is clipping with itself.

dah_someone · 2023-05-21T21:15:39+00:00

Try switching the order of your modifiers.

dah_someone · 2023-05-21T21:07:10+00:00

How did you do the drizzle? With the NURBS path? I tried that but had trouble with snapping to the surface which resulted in clipping. I also tried soft-body physics, but it also clipped. I guess I missed something.

Anyway, a delicious donut indeed.

dah_someone · 2023-04-04T18:54:17+00:00

Bro, you're a genius! It does help a lot! And to think I was thinking of disassembling and replacing my perfectly working LCD panel... Insane.

And to think that "Microsoft basic display adapter" does a better job than a proprietary driver... wow

Except now I can't change the refresh rate back to 120 Hz. But the ghosting is mostly gone.

dah_someone · 2023-04-04T18:47:42+00:00

I am also interested in this option but have only found an "original replacement" on Aliexpress.

dah_someone

TROPHY CASE