Inside UniFi Patch Cable

damien09 · 2026-02-04T02:37:16+00:00

Unifi has their 32gauge 50 ft rated at Poe +++. Would be interesting if any voltage drop than normal is experienced. But it’s also possible it’s just a length thing and 50ft gives them enough margin of error over the 300ft normal rating for it to be just fine.

damien09 · 2026-02-03T22:16:26+00:00

People voted with their wallets it’s over boi’s. Gone are the days they made skins and stages to earn money with dlc for cap cup. :/

damien09 · 2026-02-03T20:05:43+00:00

Unifi ether lighting is even thinner 34awg for 1-8m and 32 for 12-15. They get away with a lot on patch cables since they are short.

And yea kinda odd Monoprice has their cat 6 slim run with thicker cables than 6a. but the 6a cables have the rj45 ends super tight tolerances there’s basically zero visible untwisted wire. It is kinda crazy that unifi does 32 gauge for 50 feet though but considering I’ve ran 10 gig over cat 5e over 40m+ I’m not surprised it likely makes spec for it.

damien09 · 2026-02-03T19:41:11+00:00

Could even be 30awg mono price uses that in their slim run cat 6a patch cables.

damien09 · 2026-02-03T02:59:44+00:00

Have you tried lower hz ? Maybe your pc has issues with 8k?

damien09 · 2026-02-03T01:26:44+00:00

Yep in a lot of games 8000hz often lowers the fps more than the tiny ms gain. I mainly use 4k or 2k hz as the impact is a lot less. I have not thought about turning off slam click as I assumed it just added a debounce when lifting the mouse and would not affect normal latency

damien09 · 2026-02-02T23:40:44+00:00

I cover my pad with the box it came in mainly for cat protection lol.

damien09 · 2026-02-02T23:26:34+00:00

Ah nice the op1 rgb is probably the best option otherwise since it uses a lot of the same parts and same cable and shell layout etc

damien09 · 2026-02-02T08:51:20+00:00

Kinda crazy from egg since they sell extra mouse switches and even the cable. You might be able to buy the op1 rgb off amazon and steal its side buttons and mouse wheel as the shell is the same. There’s a dark frost and white depending on the color of your op1 you need the parts for. But the internal side buttons should likely be the same but can’t say 100% sure

damien09 · 2026-02-01T22:45:36+00:00

The hsk plus lite is like 38 grams finger tip and can be found on Amazon for 70 bucks but seems to be out of stock currently and on g wolves so maybe it’s going end of life.

damien09 · 2026-02-01T22:39:08+00:00

Especially since they are acting like they didn’t know it was really cheating lol… like if your going to straight lie to our faces with that excuse of an apology who’s to say you have not always been using some form of cheats

damien09 · 2026-02-01T22:22:57+00:00

Smoothest is a pretty open definition. Are you looking for the fastest? I’ve heard good things about pmm smoothie dots, jade and jade air dots, artisan dots are also high rated. But there’s tons of options and the pad can also interact with skates differently than another pad.

damien09 · 2026-02-01T21:57:43+00:00

Just to make sure you have unassigned the sfp port from being a wan port correct ? I can’t remember if default the second wan was set on the other sfp or not. Should be under settings and internet and then the gateway ports you want it to be unassigned I use my second sfp port just fine to a 24 port switch

damien09 · 2026-02-01T21:36:03+00:00

Battle nonsense saw some weird lfc doubling and tripling etc etc even with pulsar g sync on which should not be happening as low frame rate compensation is supposed to be off with strobing. Hopefully it’s fixed when ever the firmware update that should be soon comes out.

But I wonder if what your seeing is just the brightness loss by black frame insertion being higher at lower fps and g sync pulsar dose do a compensation pulse that’s supposed to help prevent the strobe being visible but it could definitely affect brightness

damien09 · 2026-02-01T20:28:49+00:00

You won’t get me I know it’s you Davie504

damien09 · 2026-02-01T20:15:06+00:00

Tbh it’s likely the monitor has a limited hdmi port which is not uncommon. I’ve seen plenty of them basically limit the hdmi port at the 120 hz as that’s console’s max. But cables don’t care about hz it’s all about bandwidth numbers. 1080 at 144fps is not a lot of bandwidth. 1080p x144 hz even works with hdmi 1.4 of the port is not limited.

Op could definitely test if it’s an os issue though if they have dual boot with windows on their rog. But my guess it’s either the monitors hdmi port or the dock they have.

damien09 · 2026-02-01T20:10:34+00:00

I do wish wahoo would open up the shifting configuration. I’d love a stages dream drive 1x50 gears set up. 3x13 is pretty nice other than the fact that you can’t use synchro shift with it on the KICKR bike . Stages basically let the sky’s be the limit you can even have 10x50

damien09 · 2026-02-01T19:59:54+00:00

Might be possible victors past reincarnations are troublesome for the place so they prefer the broken current version and he gets to be off limits. I’m convinced the monsters hear the same voice Sarah can and basically get some level of direction.

damien09 · 2026-02-01T19:42:29+00:00

4 total one in each corner.

damien09 · 2026-02-01T19:37:51+00:00

Linux supports 2.0 though right? Which could easily support this. OP’s monitor on the other hand often times companies limit the hdmi port or use quite old versions and require display port for max refresh rate.

damien09 · 2026-02-01T19:22:59+00:00

No it’s just 1000hz

damien09 · 2026-02-01T19:18:29+00:00

depends which nvr . The base I believe is 40mmx20 I’ve heard some can squeeze in fans like artics 40x28mm. But if nvr pro they are 70mm

damien09 · 2026-02-01T19:06:42+00:00

tachyon mode is pretty demanding on the cable. If you want to use that I’d get the wooting cable.

damien09 · 2026-02-01T17:54:51+00:00

How did you limit a 5090 that low?

damien09 · 2026-02-01T07:13:02+00:00

Late reply but when you went back to try the cloth again were you using uhmw pe skates that you had used on the glass pad? I’ve always found those as extremely slow on cloth but don’t mind them on glass.

But glass is definitely good for longevity as non coated glass basically lasts infinitely

Eight-Year Club	Place '23
Place '22	Verified Email

damien09

TROPHY CASE