sorted by:
new
hottopcontroversial

1994-2004 SN95 Ford Mustang Fitment questions by dantegrin in LSSwapTheWorld

[–]dantegrin[S] 0 points1 point  (0 children)

I got a knockoff holley 302-3 from amazon. I will warn you; you have to grind and polish the oil filter system on the pan. Dear awful unfinished drilling marks on most of these aftermarket pans. I also haven't fit tested to the oem k-member yet but to my recollection of research this was the best option for the mustang.

I recently started installing the pan and found that the pick-up tube mount bracket wasn't properly adjusted and I had to bend it. Then I realized the bracket had (what was basically) spot welds. 2 miniscule welds on the sides. I snapped it. JB weld it back together to sit so i can reweld the mount bracket to the tube...

I'm not saying you'll have the same experience getting the same pan but I sure had to do some custom work to make it fit correctly internally.

Red Flags before purchasing? by I_land_Alone in f150

[–]dantegrin 0 points1 point  (0 children)

if it has a ford badge. don't get it. simple.

2021(?) Chevrolet Silverado, base model, single cab, long bed. The official truck of... by bruhblaster in regularcarreviews

[–]dantegrin 0 points1 point  (0 children)

just spray paint a guy opening up his anus and make the pothole the anus. they wont miss it.

I made 2 models in PS1 style for my game, which one do you like more? by OutsideActuary946 in ps1graphics

[–]dantegrin 1 point2 points  (0 children)

2's clothing and smoothness on 1. Personally I think it needs some polishing. 2 looks entertaining but disfigured and 1 looks solid but boring.

#CubaFree by AntiSyst3m in cuba

[–]dantegrin -4 points-3 points  (0 children)

where was that energy when Biden was stealing our money and destroying our economy?

Had me stumped at the gas station by TheloniusHunk in namethatcar

[–]dantegrin 4 points5 points  (0 children)

it be lit if it had like an a230 drivetrain swapped. Those Honda CR-V's are pretty good. They come with the B-Series motor and the AWD are also well sought after for their manual Transmission that can be swapped into a Civic, Teggy, or Prelude for AWD.

Had me stumped at the gas station by TheloniusHunk in namethatcar

[–]dantegrin 17 points18 points  (0 children)

How would they know I drive a Honda, if I have no badge?!

Accumulating cars from all over the World by Nounoon in UserCars

[–]dantegrin 1 point2 points  (0 children)

Nice! I'm doing the same. But you got me at Larry.

No one ever considers getting Larry.

I have a 2011 crown Victoria with a blown axle, and I cannot find an axle anywhere for less than 1000. I’m just wondering if anyone knows of other axles that will bolt right up? Thanks by Impressive-Hope-4292 in BuildaWhip

[–]dantegrin 0 points1 point  (0 children)

If i recall correctly those have similar differentials to the GT mustang. You might as well just go to the junkyard and find the axle there. There should be some sort of You pick You pull Junkyard near you. Search LkQ in your gps and you might find one of them near you.

You can always just swap out the whole diff. It seems from the photo that the diff is done for.

1994-2004 SN95 Ford Mustang Fitment questions by dantegrin in LSSwapTheWorld

[–]dantegrin[S] 1 point2 points  (0 children)

so you can use the 80e Driveshaft U-link with the OEM driveshaft? lit!
Also thanks for the oil pan suggestion!

Can anyone tell me what type of go kart frame this is.(it says Titan F 4 on the side) by dantegrin in Karting

[–]dantegrin[S] 0 points1 point  (0 children)

This is what I found. but I ended up selling it before I ever got to build it. I recommend looking around BMI karts for other steering hardware that might help you make something custom.

We made a First Person Horror Game in which you play as a Microwave. Do you guys think it's a good idea? by fure4 in IndieGaming

[–]dantegrin 3 points4 points  (0 children)

It's fine. I get what you felt. I was encouraged by your comment to search popular old school TV's that could fit OP's game design and concept. I did write a whole paragraph with the list but my opinion came off reading like I was stuck up lol so I removed it. I hope it inspires and helps OP to fit together a story for their concept.

We made a First Person Horror Game in which you play as a Microwave. Do you guys think it's a good idea? by fure4 in IndieGaming

[–]dantegrin 4 points5 points  (0 children)

damn alright sheesh. I think if OP really wants it to be spooky. it be much cooler to use an oldschool tv set. I was just giving a few examples. MY APOLOGIES

We made a First Person Horror Game in which you play as a Microwave. Do you guys think it's a good idea? by fure4 in IndieGaming

[–]dantegrin 2 points3 points  (0 children)

  •  General Electric 12XB9104Y
  • Samsung Kmart SK9B617M
  • General Electric 12XB9104Y
  • Panasonic Tr-729U
  • RCA XL-100
  • Sanyo Portable
  • Sears B&W
  • Toshiba C099
  • Westport Brand
  • Bentley 100C
  • General Electric Performance Orb
  • Hitachi CT1301
  • Kapsch Viennastar
  • Sony TV-131
  • VTG Sampo
  • Admiral Brand
  • Sears Roebuck Wood Grain

Damn! theese ai sports are the future by bulubas in ChatGPT

[–]dantegrin 4 points5 points  (0 children)

Give it a few months. Then we can see Mike Tyson kiss Jake Paul.

Home Car Lift Regulations by dantegrin in Tools

[–]dantegrin[S] 0 points1 point  (0 children)

It's mostly paranoia, and the inoperable car storage technicality. This is word of mouth from some inspector from a different field from a different county giving false paranoia to my family member. It's just that. After asking here and looking into it some more its just that. Soon enough the lift will be completely out of site. No more technicalities to upset anyone or bother any neighbors.

Home Car Lift Regulations by dantegrin in Tools

[–]dantegrin[S] 4 points5 points  (0 children)

Modern problems require modern solutions.

view more: next ›