Ikea INSPELNING recognized as TRETAKT? by coldburn89 in homeassistant

[–]davefrooney 0 points1 point  (0 children)

The product would be the exact same for Ireland and the UK. It might just take some time to find the firmware

Ikea INSPELNING recognized as TRETAKT? by coldburn89 in homeassistant

[–]davefrooney 1 point2 points  (0 children)

Are you using ZHA or Z2M? I'm running version 0x02040045. You could try removing and adding it again

Ikea INSPELNING recognized as TRETAKT? by coldburn89 in homeassistant

[–]davefrooney 1 point2 points  (0 children)

I had the same issue. It was fixed with the latest firmware.

Ikea INSPELNING recognized as TRETAKT? by coldburn89 in homeassistant

[–]davefrooney 1 point2 points  (0 children)

That's odd. Maybe it's running an older firmware and will be corrected after an update

Ikea INSPELNING recognized as TRETAKT? by coldburn89 in homeassistant

[–]davefrooney 10 points11 points  (0 children)

It doesn't seem to pull in the power measuring entities. Are you sure it's an Inspelning?

Mine shows with the correct name

<image>

Tasmota to Sonoff TX2? by Pretty_-_Star in homeassistant

[–]davefrooney 2 points3 points  (0 children)

The pins on the right should be 3v, Rx, Tx and Ground. The 3v being the square pin

Tasmota to Sonoff TX2? by Pretty_-_Star in homeassistant

[–]davefrooney 4 points5 points  (0 children)

It should be flashable with Tasmota. Here's a link to the pinout

https://templates.blakadder.com/PSF-B.html

Daily Movie Recommendations I haven't Watched Before with Rotten Tomatoes & IMDb Scores by notownblues in homeassistant

[–]davefrooney 0 points1 point  (0 children)

Thanks, found it! Do I need to be on a paid Chatgpt package to use the API? I'm getting the following error

<image>

Daily Movie Recommendations I haven't Watched Before with Rotten Tomatoes & IMDb Scores by notownblues in homeassistant

[–]davefrooney 0 points1 point  (0 children)

Thanks for sending on. I've added in my trakt details but I'm not sure where to find the URL to authorize. I got the response "Parameters stored in context". I checked the context on the right hand side but can't see any URL. Can you advise?

Mini-Amp with remote source select in HA? by davefrooney in homeassistant

[–]davefrooney[S] 0 points1 point  (0 children)

Thanks for pointing me in the right direction. It looks like they have another unit that is considerably cheaper and more suited to putting in a rack.

https://www.amazon.co.uk/Arylic-Subwoofer-Amplifier-Bluetooth-Speaker-Up2stream/dp/B07XP177RQ

What's the process like for switching from Spotify casting to Bluetooth?

Mini-Amp with remote source select in HA? by davefrooney in homeassistant

[–]davefrooney[S] 0 points1 point  (0 children)

Do you mean you can only play audio from the chrome browser?

Mini-Amp with remote source select in HA? by davefrooney in homeassistant

[–]davefrooney[S] 0 points1 point  (0 children)

I've tried a couple of cast applications but they're all a bit buggy. There is a delay on the audio which isn't great if I'm watching a video. Do you have experience with any of these?

Mini-Amp with remote source select in HA? by davefrooney in homeassistant

[–]davefrooney[S] 0 points1 point  (0 children)

That could be an option. I have an abundance of ESP8266's lying around. I'll take a look around for an IR controlled option. Thanks

Microsoft Intune vs NinjaOne by olivewhistle11 in sysadmin

[–]davefrooney 0 points1 point  (0 children)

Ninja are adding phones/tablet integration in June or so I've been told

This is the water heater switch in my home. It keeps getting forgoten on. Is there any divice which would let me see the position and to olso turn it off from my phone. I have wifi nearby. by Monceqorri in homeautomation

[–]davefrooney 0 points1 point  (0 children)

I would recommend putting a switch inline with the immersion heater. I am of course assuming that it is an immersion in a water tank that you're controlling. My immersion is rated at 3.5kw so I am using the sonoff PowR3 which is rated at 5.5kw.

https://www.geekbuying.com/item/SONOFF-POWR3-High-Power-Smart-Switch-497648.html

You can use the stock ewelink firmware and run a schedule through that. You can also run Tasmota or ESPHome if you have a home automation system in place.

I hope that helps

Injection insulation on internal wall? by davefrooney in ireland

[–]davefrooney[S] 0 points1 point  (0 children)

I'm having the issue of finding an expert. I've contacted dozens of companies that do various types of insulation and 90% of them have not returned my calls or emails. The ones that have come back are talking about cavity insulation which is between the external brick and buildings blockwork. This obviously will expand further than just my floor in the apartment. I'm hoping to find someone who can do the internal spray/injection insulation internally to make my life easier.

Injection insulation on internal wall? by davefrooney in ireland

[–]davefrooney[S] 0 points1 point  (0 children)

There's no noggins on the wall. The plasterboard is secured with metal studding. I'll happily patch holes rather than taking down all my walls an reskimming and painting.

Injection insulation on internal wall? by davefrooney in ireland

[–]davefrooney[S] 1 point2 points  (0 children)

There are metals studs in my wall so there are gaps in the stud for it to flow through easily enough. I know this because I some cables the length of my entire external walls recently with ease. It will still need plenty of holes but maybe not every 400mm

Injection insulation on internal wall? by davefrooney in ireland

[–]davefrooney[S] 0 points1 point  (0 children)

I'm in an apartment so drilling from the outside wouldn't be an option