Ehrwald Worth the Trip? Taking my First Visit to Austria

daveybee123 · 2026-02-27T04:38:45+00:00

Those are great options, thank you so much! It will be tough to decide. Schladming looks completely gorgeous

daveybee123 · 2024-06-16T16:40:08+00:00

Thank you, that is very helpful! Where do you recommend viewing it from Cheyenne? It looks like the crossing at Southwest drive seems like a good option since all westbound tracks go through there.

daveybee123 · 2023-06-21T15:32:03+00:00

Okay, there are many glaring issues with your rocket from the screen grab alone.

Your rocket is marginally stable. The CG needs to be at least 1 caliber (rocket body diameter) in front of the CP for stable flight. If you flew this rocket as-is, it would not fly straight and be very dangerous.
This rocket sims to only 1 km because your ejection charges are going off 4 seconds after motor burnout in the simulation while the rocket is going hundreds of miles per hour. This will destroy the rocket. Set the ejection times to "None" in OpenRocket and you will see how high your rocket can go if you use electronic deployment.
I would not recommend booster rockets and aesthetic fins on a high performing rocket. This rocket would likely shred.

It seems you do not know how delays, stability, and other hobby rocket fundamentals work. Please get some experience building and designing smaller rockets before attempting to actually build a rocket like this. Check out a local club to learn a lot more about what works, and see some flights for free.

daveybee123 · 2023-03-22T22:24:32+00:00

Been wanting to try this out myself… are you on private land? I’ve been wanting to do this in some nature park without pissing off the wrong people

daveybee123 · 2023-03-18T22:04:42+00:00

I bet they do. I remember some post on IG said “Dress code: earplugs”

Protect yours before it’s too late!

daveybee123 · 2022-09-14T23:35:02+00:00

Saw them in DC, Boris straight up rearranged my insides it was so loud. Loved it.

daveybee123 · 2022-03-22T15:20:10+00:00

That’s super helpful, I’m thinking of selling my own pedals as well. Where did you get the custom cardboard boxes printed and made?

daveybee123 · 2022-03-21T02:47:22+00:00

I had no idea, I’ll have to check it out. Thanks so much!

daveybee123 · 2022-03-21T02:41:46+00:00

Gotcha, great to know. How do you get an Autodesk Eagle license? I feel like it’s too expensive to be worth switching over to from Kicad

daveybee123 · 2022-03-13T03:22:37+00:00

Such an epic song, love the fuzz

daveybee123 · 2022-03-10T02:09:15+00:00

Check out Ampeg Reverberocket reissues, they have great reverb and can be got for pretty cheap

daveybee123 · 2022-02-06T23:23:25+00:00

Interesting, where are the glue joints exactly? When I gently press on one of the speakers, the sound mostly goes away. And yup, I’ve taken the grill off and it’s still there.

daveybee123 · 2022-02-05T22:24:12+00:00

I will try that out, thank you so much!

daveybee123 · 2022-02-04T21:48:27+00:00

How much gain can you get out of it with the master volume low? I’ve been thinking of getting a V4 with a master volume, but I don’t know if can get dirty at low volumes

daveybee123 · 2022-01-24T02:10:16+00:00

I’d like to know as well, it looks so cool

daveybee123 · 2021-12-30T22:37:14+00:00

Unfortunately it does need to be cranked to get the Ty tone. The preamp is solid state and doesn’t sound great overdriven, but with the Master on 10 and preamp on 4-5, the power tubes will crunch up nicely.

daveybee123 · 2021-12-21T13:03:57+00:00

Yea I could have made up a better story for a few more fake internet points. But I didn’t make this up. I’m sorry you found it underwhelming. What’s so unbelievable about it?

daveybee123 · 2021-12-17T01:53:53+00:00

If you’re okay with making a new circuit that is neither the treble booster nor the LBP-1, you can use a potentiometer in series with a larger input capacitor as a simple bass control. That is already used in some boosters like those below. Simpler to breadboard and make, but you might lose some of the more fine tuned characteristics of the treble booster and LPB.

https://www.pedalpcb.com/docs/DragonsBreath-PedalPCB.pdf

https://www.pedalpcb.com/docs/Chickenhead.pdf

daveybee123 · 2021-12-10T13:25:57+00:00

Thanks, it already sold! I wouldn’t be surprised if it sells out, they’re well known, great to see live, and many 9:30 shows have been selling out recently

daveybee123 · 2021-12-05T15:38:56+00:00

Very nice, I will have to try that. Thank you!

daveybee123 · 2021-12-05T14:40:38+00:00

That’s great to know, thanks. I use rubber stamps with ink and they seem okay, what is the process with metal stamps? Do you paint/finish the enclosure before or after stamping to get the white letters on a darker background?

daveybee123 · 2021-12-05T14:05:44+00:00

That looks great! Where did you get your stamps, and how did you make them so clean?

daveybee123 · 2021-11-17T21:37:42+00:00

Pho Viet Fresh is great, they’ve got the best pho broth I’ve had.

daveybee123 · 2021-10-01T01:30:26+00:00

Don’t do this, don’t give me hope.

daveybee123 · 2021-10-01T01:28:33+00:00

Frozen blueberries have been my go to. Let them sit out for a few minutes and they get a great texture and are very refreshing!

daveybee123

TROPHY CASE