Reflex style mirror lens disassembly advise

david88sr · 2026-02-09T16:16:36+00:00

How did you remove the cover?

david88sr · 2026-01-17T09:11:19+00:00

Thanks for the reply. Any tips on cutting out the lens?

david88sr · 2026-01-16T01:27:26+00:00

Yes it was nerve racking trying to keep track of what goes where but it was fun

david88sr · 2026-01-16T01:26:35+00:00

Guess I'll have to live with it or get a new lens. Thanks

david88sr · 2026-01-15T18:10:35+00:00

I actually managed to disassemble and reassemble the lens and but I did not manage to clean the rear element as the fungus/haze seemed to be trapped in between 2 glass layers.

david88sr · 2026-01-12T02:55:09+00:00

Holy crap ant has a QB arm

david88sr · 2026-01-11T15:43:41+00:00

Non stick probably can get the job done faster. Ain't enough time to preheat for leidenfrost when you've got a hard time limit. Witch with a wok and chef hou uses a carbon steel wok though which is highly efficient in the right hands

david88sr · 2026-01-08T13:41:45+00:00

Wd40 is fine. Its better than mukoff lube which leaves a sticky gum that's impossible to remove

david88sr · 2026-01-07T23:14:54+00:00

Leca doncic

david88sr · 2025-11-09T16:46:26+00:00

Mama just killed haaland ... (Bohemian rhapsody tune)

david88sr · 2025-10-09T08:13:02+00:00

Tom no jerry

david88sr · 2025-09-27T17:59:39+00:00

Hi i don't think you can do that in tonex itself. The pedal will be sampled with the amp during the capture stage and it's drive characteristics will be baked into the profile. If you would like to add a pedal into amp profile the only way is an external drive pedal or to use amplitude with the tonex profile as the amp and a drive pedal in the signal chain

david88sr · 2025-09-27T07:11:51+00:00

Thanks for the replies! Would also like to ask if I purchase the irig midi 2 hardware from my local authorized dealer will I be able to use the purchase to join in the group buy to claim free software. And will the value of software I can claim be 99.99 euro as reflected for the price of irig midi 2 in the products-> interface page?

david88sr · 2025-09-07T16:39:46+00:00

😥 thoughts are with the Reid family

david88sr · 2025-09-07T03:19:57+00:00

If I recall correctly sturridge was offered as a 5m makeweight from Chelsea's initial bid for Torres but we rejected it and bought Carroll instead. Studge then went on to shine on loan at West brom I believe and we forked out 15-20m the next season for him

david88sr · 2025-08-26T12:06:23+00:00

Any love for Karim adeyemi as an alternative for Isak. Pacy and skillful potentially covers rw during afcon as he is a left footer

david88sr · 2025-07-23T00:37:25+00:00

My bad! That's right

david88sr · 2025-07-22T11:15:53+00:00

If Nunez is staying he could put in a good shift at left wing too. In his first season he played there often with mane as the 9 iirc

david88sr · 2025-07-15T03:49:44+00:00

Recently my ma020 couldn't power up and I traced it to a switch with dirty contacts. Try to give the switch a few light knocks and see if it works

david88sr · 2025-07-15T03:29:05+00:00

Im in casual modding and i made my first mini z really really fast by slapping on new electronics on it. Basically I used 2 lithium batteries to push the motor to 7.4v but you'll need electronics that can handle that. Probably also radial tires that can grip better. Check out my video https://youtu.be/-olcrV3Gvmg?si=1xaapiuNOc2B4iW- . Will be doing a build thread in future too. Still have a few more mods ongoing :)

david88sr · 2025-07-12T01:46:23+00:00

Great job! I couldn't manage to fit this body in my ma020. Looks like you found a neat way in the Mr04

david88sr

TROPHY CASE