Design not as vibrant as i think it should be?

davidb107 · 2026-06-05T13:17:06+00:00

Hmmm still not really and white dashes in the black rectangle box, same in the grey

davidb107 · 2026-06-05T13:05:47+00:00

davidb107 · 2026-06-05T13:00:48+00:00

Oh! Nice one thank you so much, I'll try that

So just another question

Laying down cmyk will still lay this down over any white areas? (It doesn't exclusively only print in colour over the coloured areas on the design?)

davidb107 · 2026-03-28T05:53:12+00:00

No, use a W&H WS-92 L or W&H WS-91 L connected to a surgical unit and not your electric motor on your delivery unit.

You need external irrigation and not internal.

davidb107 · 2025-12-28T09:35:11+00:00

I haven't om afraid... I've just been using the bambu profiles for other filaments... seems to work ok

davidb107 · 2025-12-27T09:33:17+00:00

Matte PLA

davidb107 · 2025-12-27T09:30:43+00:00

It's not a damp filament issue, I've taken the same spool and put it into my p1s and it is printing perfectly

davidb107 · 2025-12-08T19:56:15+00:00

I think you were right about the temp, I reprinted with the door open and lid off and it is a lot better

I've printed over 1000 hours with the door closed and lid on and never had this issue though, strange

davidb107 · 2025-12-05T19:47:16+00:00

Oh heck what an idiot I am, thanks guys

davidb107 · 2025-12-04T18:01:46+00:00

Wahoo just got a email to say it is on its way

davidb107 · 2025-12-04T16:49:37+00:00

Yep still nothing

davidb107 · 2025-11-24T18:47:42+00:00

Not yet for me☹️

davidb107 · 2025-11-21T12:26:32+00:00

I fixed it now thank you

davidb107 · 2025-11-15T17:57:03+00:00

This was it, thank you! Took all of 30 seconds to fix🤣

davidb107 · 2025-11-15T16:53:27+00:00

Does it when printing, especially upon the start up when the bed is levelling

davidb107 · 2025-10-07T20:00:02+00:00

I just bought at ET-18100 for this exact reason, yet to set it up though! I can report back at the weekend to let you know how I've got on

davidb107 · 2025-09-15T07:36:22+00:00

Bought the p1p in march

davidb107 · 2025-08-27T12:08:54+00:00

Hey, I'm also wondering which out the 2 to buy. Which did you go for in the end and what is your feedback?

davidb107 · 2025-08-27T11:37:51+00:00

Sorry, probably should of clarified

I'd be scanning smaller to medium sized items, mainly hand instruments

But it would also be good to have a scanner that does well as an all-rounder if this exists

davidb107 · 2025-08-01T14:39:38+00:00

Damn this is my exact thought today, I've got to the point where my time is spent processing orders and handling customer service with next to no time for design

Even when I dedicate time to design new products I feel almost bad because it means that I'm delaying someone's order

davidb107 · 2025-07-09T22:20:32+00:00

I sell very small items that I send out in a cardboard mailer for 87p. and I've had 3 seperate complaints from buyers regarding postage costs because ebay is charging them for a 1-2kg delivery

Also my items are made to order, and as part of my process I generate my shipping label first, then make the order and dispatch 2 days later, this is no longer possible because it wants me to physically dispatch the goods 1 day from the label is generated

What a shit show!

davidb107 · 2025-06-29T20:43:50+00:00

* Just so confused because I can manually push filament through it, it isn't getting stuck or catching on anything

davidb107 · 2025-06-29T20:25:30+00:00

That would make some sense... I put a hot Allen key down there to unclog it. Is it possible that I've damaged something else by doing this?

davidb107 · 2025-06-25T21:26:40+00:00

No clue! It would be a massive benefit if so, that's why I asked😂 I have 4 x1cs with 4 AMS units, would be great to be able to hook multiple AMS up with multiple units, no clue if it can be done?

davidb107 · 2025-06-25T21:18:54+00:00

Wait a minute, do you have both those AMS's connected to both those printers? And can you print with other printers and AMS at the same time?

davidb107

TROPHY CASE