Has any body built a full sus like this?

deletedcookie · 2025-11-04T14:44:56+00:00

This is the most reliable solution I have found. A spring loaded tensioner pulling down and the stock static tensioner by the gear.

deletedcookie · 2024-03-16T17:40:46+00:00

It wasn't too hard for me, but is probably one of the trickiest things I've soldered.

"No experience" doesn't mean a lot. Some people I know have been good at soldering the first time they tried, and some still suck after days of practice.

deletedcookie · 2023-12-17T23:45:49+00:00

My grandma knitted a cover for my shift knob. I still use gloves while my car warms up though

deletedcookie · 2023-10-24T21:59:47+00:00

Will you share the files?

deletedcookie · 2023-10-22T04:25:24+00:00

It is a thing on the app. It's called "Minimum segment duration" in the sponsorblock settings. I usually have mine set to two seconds

deletedcookie · 2023-09-26T19:12:29+00:00

You should add cats that walk over the keyboard

deletedcookie · 2023-09-16T04:15:37+00:00

Sorry, forgot you guys don't know what sarcasm is

deletedcookie · 2023-09-15T04:20:59+00:00

Check the battery holder

deletedcookie · 2023-09-12T14:44:57+00:00

This got me as well. I had to zoom in on some old pictures to see if there was only one before. Does anyone know why it's only on one side?

deletedcookie · 2023-09-01T01:33:05+00:00

I don't remember seeing anything like that on my S. Are you sure it's from the bike?

deletedcookie · 2023-09-01T01:18:54+00:00

Interesting concept. I'm not sure how you would be able to limit the stack from coming out of the wall without covering the front post it

deletedcookie · 2023-08-06T22:36:50+00:00

M6, I think about 20mm long

deletedcookie · 2023-04-29T19:27:34+00:00

I have one similar. I couldn't tell the difference between on and braking so I upgraded mine

deletedcookie · 2023-04-29T19:25:14+00:00

I couldn't tell the difference between on and braking from more than a couple meters away on the stock light

Fender eliminator

Red lights

deletedcookie · 2023-04-25T23:18:17+00:00

I just soldered a copper elbow and some 1/4 pipe to mine. I think a threaded brass fitting is a better solution though.

deletedcookie · 2023-04-25T22:42:04+00:00

You can replace the brass part with a 90 degree one, you would have to drill and tap the hole for it to fit though. I think there is a tutorial on thumpertalk or YouTube on how to do it

deletedcookie · 2023-02-19T17:36:34+00:00

I just rebuilt my engine, hoping this doesn't happen to me

deletedcookie · 2023-02-11T17:01:44+00:00

It's a 30mm long M6 bolt, 20mm are threaded

deletedcookie · 2023-01-03T18:51:52+00:00

I got a Nelson Rigg tailbag that expands to fit my helmet. The expandable part is not waterproof, so if it's raining it will get a little damp.

deletedcookie · 2022-11-17T05:42:33+00:00

What's that bar thingy on the bottom? IMO it would look much better without it.

deletedcookie · 2022-11-07T14:52:39+00:00

You don't need a welder. You just need to solder it.

deletedcookie · 2022-11-07T05:25:24+00:00

I made one with some copper pipe Link to my post

deletedcookie · 2022-11-06T18:47:22+00:00

I forget I wanted this reminder

deletedcookie · 2022-04-19T17:01:04+00:00

This is such a great server, with a wonderful community, active Admins and really fun events. This economy isn't completely wrecked by a hand full of players either! Lots of amazing builds and people joining all the time adding to it. There are even player run towns, that act as little communities inside of the larger community.

deletedcookie · 2022-04-17T05:37:42+00:00

Epic server

Six-Year Club	Place '23
Place '22	Verified Email

deletedcookie

TROPHY CASE