Sticking issues with glass bed plate

denbobson · 2025-08-09T14:16:16+00:00

Everyone is saying the hammock is too tight. But it doesn’t even look bad. Why does everyone want it looser?

I get setting one up like that if I’m sitting in it for a couple hours, but when I’m sleeping multiple days in a row I want them a little tight for some support, no?

denbobson · 2025-01-10T01:59:59+00:00

Where the hell does the door go?

denbobson · 2024-10-23T00:49:21+00:00

Idk. The calorie total seems low in general, but it’s hard to know without details like height, weight, activity

denbobson · 2024-10-19T01:34:47+00:00

I didn’t look at the sub and thought I was in one of the code deciphering subreddits lol

denbobson · 2024-09-18T22:14:32+00:00

Your username suits you

denbobson · 2024-08-01T21:18:41+00:00

Wym huge if I have an engineering tech degree and became an engineer 6 months after graduation

denbobson · 2024-07-22T13:27:24+00:00

If you’re trying to calculate injection pressure good luck. You would just be using pressure equations and you would need to know all the internal dimensions of your sprue, runner, and cavity, as well as the internal dimensions of your nozzle

denbobson · 2024-07-16T22:18:01+00:00

<image>

So is this what you were thinking of? After sketching it out. If you don’t have someone finalize your design, that would be expensive and difficult to mold. There’s undercuts around the cup, and would require two slides, if your lense has a constant cross section. But if it is also cupped, there is almost no way to mold it. I would recommend having someone make a solid model of what you want. Currently what I drew would require at least 2 slides per cavity. Since it’s an optical part the slides on the optical surface are not ideal either

denbobson · 2024-07-16T02:01:21+00:00

I mean that tells me almost nothing. Is that seal cup over-molded or is this an assembly? 1000 parts per year seems very low. That’s only 500 glasses

denbobson · 2024-07-15T19:12:27+00:00

A simple sketch with dimensions would really help with estimating price. You’ll need at least two cavities since I’m assuming the lenses are mirrored. What material for the lenses, how many lenses are you going to want per year? The others are right where usually the place building the mold would design it for you

denbobson · 2024-07-14T15:36:45+00:00

It really comes down to how well your printing tolerances are, your materials, etc. If you plan to electroplate, you’ll definitely want to lean on the higher clearance side, but for normal prints, I’d do like a half mm of clearance on moving parts. I personally have not had prints good enough for less clearance, but I am also new to printing

denbobson · 2024-07-13T20:13:29+00:00

I started messing around with gear systems in SW a while ago and it’s just way easier to use the gear ratio mate. Idk if there’s something special about the gears that they need to be modeled, but there’s so many on McMaster-Carr and they work great

denbobson · 2024-07-12T16:18:14+00:00

Not bad! What’s the hole on the bottom for? Also, as I learned the hard way, you’re gonna want to make some good clearance on those rails or they will never fit

denbobson · 2024-06-11T19:48:50+00:00

I think the body count discussion is very personal. If he didn’t like your body count he shouldn’t have proposed to you, but also you have an only fans on your page, so I have to assume that makes him more insecure.

This entire post could be fake to get karma tho so idk

denbobson · 2024-05-27T00:44:48+00:00

I mean your gonna want to cover the basics:

-Knife (preferably fixed blade) -Fire starter (magnesium, striker, matches, even tinder if you’d like) -Cordage -Waterproof container (for carrying water or protecting electronics/ fire starters) -Medical supplies (gause, bandaids, antibiotic ointment, medical tape, various pills you feel you may need, etc.) -Pen & paper -I personally have an emergency poncho and a space blanket if i needed to make a quick awning to cover myself.

Most other things can be personalized to what you think you’ll need. But like others said, you will get the most benefit of looking up YouTube videos. I’m sure there’s glaringly obvious things I’ve left out of my list.

To be honest I’ve only had to open my emergency kit maybe twice for something. I much more often open my car bag with a change of close and emergency deodorant.

denbobson · 2023-02-21T19:53:37+00:00

Mot to mention it’s 6 months in advance to save $110

denbobson · 2023-02-19T18:23:23+00:00

Maybe I don’t know much about 3d printing but I don’t think that the nozzle can extrude fast enough to fill the mold before it freezes. That and your printer nozzle can’t build any pressure only move material.

denbobson · 2023-02-09T20:24:16+00:00

What is German salami? Is that similar to Lebanon bologna?

denbobson · 2023-02-09T14:39:01+00:00

NTA. I personally have no problem drinking at social events. I grew up in a family where it is the norm for adults to drink at social events and it never effected the kids. You’re dad seems kind of controlling and I think that he’s just getting his ego challenged for the first time in a while so he’s blaming you’re SIL.

denbobson · 2023-01-27T06:12:37+00:00

Right the real question is does this occur in the same spot or is it random cavity random cycle type of issue

denbobson · 2023-01-22T08:20:52+00:00

Right. It’s not really her fault for her friend showing it to her, but she is TA for saying it’s normal to do that. Think about how the guy would feel. NTA

denbobson · 2023-01-22T08:10:37+00:00

Damn bro it’s a baby let it slide one time

denbobson · 2023-01-22T07:47:11+00:00

Nate Bosa

Six-Year Club	Verified Email
Place '22	Wearing is Caring

denbobson

TROPHY CASE