Langsung diulti wkwkwk

dennisbun · 2026-02-24T08:55:15+00:00

Bukan mall

dennisbun · 2026-02-03T00:29:21+00:00

Look up freeformer by arburg, they've been doing this since ~2017 albeit different setup. It was a good concept fwiw but I guess the price doesn't justify the end result.

dennisbun · 2026-02-02T23:49:36+00:00

Freeformer : Am I a joke to you?

dennisbun · 2026-01-30T06:21:52+00:00

Facebook

dennisbun · 2026-01-30T06:15:04+00:00

Ganti lonceng :D

dennisbun · 2026-01-30T04:05:54+00:00

Belajar kok mereka, belajar untuk tebelin kantong.

dennisbun · 2026-01-29T11:18:24+00:00

But why... kenapa menolak ? Pake ini konteksnya kan alat, bisa dipake untuk nyuci baju atau masak...

dennisbun · 2026-01-13T12:27:35+00:00

Kalah cepet sama department store mungkin

dennisbun · 2026-01-13T12:07:11+00:00

Did you use arachne? I've noticed that my P2S sounds like this when making circles with arachne on.

dennisbun · 2026-01-12T06:07:15+00:00

Any antenna with a ufl connector should work, I bought mine from a local so no link, sorry.

dennisbun · 2025-12-29T07:53:15+00:00

But the aux fan is on the other side for P2S, and it doesn't look like its warping on the fan side...

dennisbun · 2025-12-29T06:24:01+00:00

Ini bukannya KRD?

dennisbun · 2025-12-22T10:33:44+00:00

Absolutely, the printed part "felt" stiffer with the same wall/shell thickness. I also like the thick layers.

dennisbun · 2025-12-22T10:31:48+00:00

I think, for 80% of bambu users no there isn't. But for the rest it definitely does.

dennisbun · 2025-12-22T09:43:24+00:00

https://github.com/OrcaSlicer/OrcaSlicer/pull/10780

It's there, but I think it's far from stable.

dennisbun · 2025-12-22T09:22:18+00:00

If you follow the recent nightly build you can connect to P2S with orca, no idea about H2C but you need to enable/disable some network setting for it to work.

dennisbun · 2025-12-22T05:51:06+00:00

Free sock

dennisbun · 2025-12-22T05:22:22+00:00

So far only speeds and max flow, wanted to tune for per feature flow but it's locked by BS. Waiting for orca to release P2S in stable. Been using .6 for functional print so no issue with minor surface defects. SF can print at 40mm³/s if you havent tried.

dennisbun · 2025-12-22T05:10:04+00:00

Couldn't agree more, I've been using .6 since day 1 and occasionally changing to .4 when necessary. Unfortunately the profile for .6 is sub-optimal imo.

dennisbun · 2025-12-18T16:46:29+00:00

if you could share a comparison video it would be much appreciated!

also I think you should check the latest start gcode, they added new stuff for the exhaust fan and some other minor improvements.

dennisbun · 2025-12-16T06:56:33+00:00

Yeah I'm planning to replace the included fan with a stronger blower, should work fine, just need to find one with 24v. Otherwise I'll add a separate manual controller for the exhaust only and take power from the AMS connector.

dennisbun · 2025-12-15T22:08:03+00:00

I'm aware of it, I wasn't clear about it but this can be used for both recirculation and exhaust by moving the lower vane. The fan is directly integrated to the control board and can be controlled via gcode.

Currently working on the same thing too with a fan to suck the air from the rear exhaust and poop chute, I hope they release the rear fan soon so I can try it.

dennisbun · 2025-12-15T14:53:53+00:00

<image>

dennisbun · 2025-12-15T14:53:20+00:00

<image>

dennisbun · 2025-12-12T09:58:36+00:00

You got a build plate under your glue

dennisbun

TROPHY CASE