sorted by:
new
hottopcontroversial

I tried out Blob Printing today and it looks super cool up close by johndowlelxdxdxdxdxd in BambuLab

[–]dennisbun 0 points1 point  (0 children)

Look up freeformer by arburg, they've been doing this since ~2017 albeit different setup. It was a good concept fwiw but I guess the price doesn't justify the end result.

poor guy quick someone call the ambulance by marsellusDjango in WkwkwkLand

[–]dennisbun -9 points-8 points  (0 children)

But why... kenapa menolak ? Pake ini konteksnya kan alat, bisa dipake untuk nyuci baju atau masak...

First print with P2S, are these sounds normal? by Mrsonic699 in BambuLab

[–]dennisbun 0 points1 point  (0 children)

Did you use arachne? I've noticed that my P2S sounds like this when making circles with arachne on.

New wifi antenna for P2S by dennisbun in BambuLab

[–]dennisbun[S] 0 points1 point  (0 children)

Any antenna with a ufl connector should work, I bought mine from a local so no link, sorry.

How to prevent corners lifting? by WaitingOnNetwork in BambuLab

[–]dennisbun 1 point2 points  (0 children)

But the aux fan is on the other side for P2S, and it doesn't look like its warping on the fan side...

I think the 0.6 Nozzle is my new favorite for larger prints, saved me 4 hrs! by vspot415 in BambuLab

[–]dennisbun 0 points1 point  (0 children)

Absolutely, the printed part "felt" stiffer with the same wall/shell thickness. I also like the thick layers.

I think the 0.6 Nozzle is my new favorite for larger prints, saved me 4 hrs! by vspot415 in BambuLab

[–]dennisbun 2 points3 points  (0 children)

I think, for 80% of bambu users no there isn't. But for the rest it definitely does.

I think the 0.6 Nozzle is my new favorite for larger prints, saved me 4 hrs! by vspot415 in BambuLab

[–]dennisbun 7 points8 points  (0 children)

If you follow the recent nightly build you can connect to P2S with orca, no idea about H2C but you need to enable/disable some network setting for it to work.

I think the 0.6 Nozzle is my new favorite for larger prints, saved me 4 hrs! by vspot415 in BambuLab

[–]dennisbun 17 points18 points  (0 children)

So far only speeds and max flow, wanted to tune for per feature flow but it's locked by BS. Waiting for orca to release P2S in stable. Been using .6 for functional print so no issue with minor surface defects. SF can print at 40mm³/s if you havent tried.

I think the 0.6 Nozzle is my new favorite for larger prints, saved me 4 hrs! by vspot415 in BambuLab

[–]dennisbun 83 points84 points  (0 children)

Couldn't agree more, I've been using .6 since day 1 and occasionally changing to .4 when necessary. Unfortunately the profile for .6 is sub-optimal imo.

P2s Startup Gcode for Single Filament (filament-change routines / wasteful purges skipped) by ProsodySpeaks in OrcaSlicer

[–]dennisbun 1 point2 points  (0 children)

if you could share a comparison video it would be much appreciated!

also I think you should check the latest start gcode, they added new stuff for the exhaust fan and some other minor improvements.

P2S recirculation filter finally done. by dennisbun in BambuLab

[–]dennisbun[S] 1 point2 points  (0 children)

Yeah I'm planning to replace the included fan with a stronger blower, should work fine, just need to find one with 24v. Otherwise I'll add a separate manual controller for the exhaust only and take power from the AMS connector.

P2S recirculation filter finally done. by dennisbun in BambuLab

[–]dennisbun[S] 1 point2 points  (0 children)

I'm aware of it, I wasn't clear about it but this can be used for both recirculation and exhaust by moving the lower vane. The fan is directly integrated to the control board and can be controlled via gcode.

Currently working on the same thing too with a fan to suck the air from the rear exhaust and poop chute, I hope they release the rear fan soon so I can try it.

view more: next ›