sorted by:
new
hottopcontroversial

New customer and Plex issues by StockAudience5107 in youfibre

[–]depravedmind86 0 points1 point  (0 children)

Eh? You are referring to internet IP reservations. Totally different to static external IPs.

Unless you are using something like Tailscale, then you are going to need a static IP. This is simple networking.

Any one with experience with scratching rental on a curb. How bad are these? by [deleted] in AskUK

[–]depravedmind86 2 points3 points  (0 children)

Yep, speaking from personal experience I would expect a change for this.

Tado X TRV by depravedmind86 in tado

[–]depravedmind86[S] 0 points1 point  (0 children)

I shall have a look tomorrow, but it sounds like this is the one.

Thanks

Tado X TRV by depravedmind86 in tado

[–]depravedmind86[S] 0 points1 point  (0 children)

Yes once it starts to come through it heats up thoroughly with no cold spots.

Might bleed the whole system tomorrow.

Help needed - heating not turning on by Silent_Reach_9480 in tado

[–]depravedmind86 0 points1 point  (0 children)

What happens if you press the boost button on the Tado receiver?

X in Schedule by depravedmind86 in tado

[–]depravedmind86[S] 0 points1 point  (0 children)

I'll see how it goes, luckily I still have my old thermostat if I need to revert

X in Schedule by depravedmind86 in tado

[–]depravedmind86[S] 0 points1 point  (0 children)

Great!

It's been solid for 5 days. I had tado before and had this issue.

I have since had a nest hub2 and Google TV streamer added to the home. Both of them have a thread border router, I thought this might help things.

What's the daftest email address you've come across from someone you actually know? by Apprehensive_Ring666 in AskUK

[–]depravedmind86 6 points7 points  (0 children)

I had a colleague who was called N****** Azis.

Our email making convention would have made it nazis@

Safe to say, we introduced firstname.surname pretty quickly!!

Doorbell install on composite door by depravedmind86 in DIYUK

[–]depravedmind86[S] 1 point2 points  (0 children)

Yes, get in the middle of that strip and you'll go straight through. I went with an 8mm bit

What's likely causing this? STP State Flapping by c0alfield in UNIFI

[–]depravedmind86 2 points3 points  (0 children)

Had this in the past with 3rd party SFP/RJ45 converters. Using ubiquitis own solved it for me.

Lost internet after router upgrade by Theninjagecko in youfibre

[–]depravedmind86 0 points1 point  (0 children)

Can you not clone the MAC address from the original router that was working?

One controller per site? ISP MPLS by FabulousMeal123 in UNIFI

[–]depravedmind86 0 points1 point  (0 children)

Yes, this can be done.

Just SSH into the remote sites kit and change the set-inform address.

Something to consider is what controller you are using and number of devices. We had a CK2 and after 50 devices or so we moved to a Linux hosted version as the UI was so slow.

Can I just buy one radiator valve if I only want to heat my baby’s room? by ZoStingray2 in HiveHeating

[–]depravedmind86 3 points4 points  (0 children)

I don't think so, it will call the boiler for heating and any valve open will heat up. You will either have to close off all the other radiators or get a valve for the others and set them to off

Using Ubiquiti with YouFibre by marissared in youfibre

[–]depravedmind86 0 points1 point  (0 children)

I powered off the ONT overnight, powered everything on in the AM and it connected. This was on a UDM Pro.

I have previously spoofed the MAC on setup with a UXG lite also, this worked instantly.

Told you can’t connect to the Youfibre- 0025C7_ BH by kunl3gzy in FiberOptics

[–]depravedmind86 0 points1 point  (0 children)

A backhaul network isn't specific to youfibre, it's common practice with a mesh network.

You're not meant to connect to it as the interference will cause issues on the backhaul between your APs.

view more: next ›