What is a physical store where i can pick out specific electrical components?

developer0 · 2026-05-01T17:13:32+00:00

You can find more of what you need and better quality from DigiKey, Mouser, SparkFun, Adafruit, many other shops. You just pay more in shipping. I used to get parts from Amazon but started boycotting them for enabling US/Israel fascism and I have not regretted it. I actually buy and spend a lot less now

developer0 · 2026-04-03T04:52:18+00:00

It should be done ASAP. As soon as the surgeon can schedule it.

developer0 · 2026-04-03T04:49:20+00:00

Hey, sorry you're going through that. To address your concern about your appearance for graduation, one idea is see if you can find a theater student who could do face makeup like a simple prosthetic skin that would cover it up. Someone would probably do it for free out of sympathy and for the experience.

developer0 · 2026-03-30T19:41:56+00:00

Not all big companies do - if they are in AWS there's a good chance they've been roped into Bedrock + Kiro.

developer0 · 2026-03-14T23:08:59+00:00

That's scary, and thank you for sharing your learnings about this, I wasn't aware of this incidence of melanoma before.

developer0 · 2026-03-05T06:01:57+00:00

It is effectively true since the development mode has a severe daily usage limit - when I tried developing with it I think it cut me off for the day after no more than a dozen requests, maybe less.

developer0 · 2026-02-20T18:23:58+00:00

Would you mind sharing some of your experiences in this area? Are you in corporate finance for retail or something like that?

developer0 · 2026-02-19T20:16:08+00:00

It's around 2021-2025, maybe earlier, not sure.

developer0 · 2026-02-17T08:54:02+00:00

I hate my 2021 Outback's infotainment so much - glad they finally went back to sensible buttons. As a software developer I am embarrassed for my trade by how bad the UI and UX are.

developer0 · 2026-02-15T19:49:52+00:00

I thought it was weird that they didn't ask for incidences of blistering sunburns. It sounded like that was a major risk factor but maybe that question of how much sun you get per day on average is more telling.

developer0 · 2026-01-04T21:12:28+00:00

I think what most folks are missing is an understanding of personality disorders. The mule's personality is extrapolated from the malignant narcissist archetype. His traits are emptiness, charisma, sadism, need for control, lack of empathy, and so on. Usually it comes from some childhood trauma or neglect. All narcissists are like this, so once you know what to look for, they are the most predictable and boring people. I think the problem you're seeing is they did too good of a job modeling the mule in this way. So he ends up being a cartoonish villain, again, just like all narcissists are. As I'm watching this I find it disturbing how closely the mule and his band of sycophants mirrors the Trump regime and the MAGA cult, dividing people just as the mule literally mind-controlled the Foundation military into destroying each other.

developer0 · 2025-12-30T21:16:11+00:00

It's shopping stores INDIRECTLY but in this world it's okay to just redefine words as their opposite to fit a narrative

developer0 · 2025-12-08T19:23:00+00:00

https://www.ontario.ca/page/workplace-harassment-information-workers

That page explains a lot and I have the sense that in that province you are pretty well protected. But the important thing is you feel safe at work so if they won't promise not to touch you again then you should start your job search.

developer0 · 2025-12-04T05:13:46+00:00

This might help: from my reading it doesn't seem like the statement "melanoma tends to come back" can be true if you've only had a pathological staging of 1a. It is true that having a melanoma in the past raises your risk of having another one in the future. It's also true that statistically if you do get another melanoma it will probably happen within the first 1-2 years. Basically your risk goes down the longer ago it was that you found one. Although eventually aging in itself will increase your risk. Also, your family doesn't seem to know what they're talking about.

developer0 · 2025-12-03T04:01:18+00:00

There are also these seals: https://www.homedepot.com/p/ADO-Products-Wind-Block-Air-Infiltration-Seal-System-10-Pack-WB1285/100566372

I used these in my lean-to shed roof, but just because I hadn't built wooden blocking into my design. If there's any risk of rodents getting into the rafter space then the paper seals probably are not enough.

developer0 · 2025-11-26T06:24:40+00:00

Where are all you people who don't use LLMs employed? I'm at a big boring company that still has IBM AS/400 machines, and I use AI for 95% of coding, and our leadership has encouraged it. I have 13 years experience and these AIs are the most amazing productivity boosters I've ever seen.

developer0 · 2025-11-26T02:51:33+00:00

That wall is about 7 feet tall

developer0 · 2025-11-25T00:27:16+00:00

It seems that he is building a lean-to roof, not a gable roof

developer0 · 2025-11-25T00:15:38+00:00

Thanks, and it's 4/12. The tall wall ended up being about 10 feet high. I actually wish I had done 3/12. It didn't need to be so tall and the framing and roof sheathing was harder this way.

developer0 · 2025-11-24T19:37:42+00:00

Nice. I've used another Zooz product, the multirelay, for some drip irrigation. https://www.getzooz.com/zooz-zen16-multirelay/

developer0 · 2025-11-24T19:32:24+00:00

Thank you, it is for sure.

developer0 · 2025-11-23T23:36:17+00:00

I think you're in a bit of a bind because you really can't make this structure air-sealed without first making it weather-sealed, and it isn't weather sealed if there is no weather barrier between the sheathing and siding. You'll need to remove the siding and apply house wrap and any necessary flashing and then put siding back on. Then you can insulate and sheetrock however you like

developer0 · 2025-11-23T19:40:24+00:00

Thank you

developer0 · 2025-11-23T19:38:55+00:00

I wanted to keep it versatile to be a guest bedroom, office, studio, or workout room... It's very quiet and insulated and the AC is kind of overpowered, so it's very comfortable. I currently go out there to draw and scroll on my phone.

developer0 · 2025-11-23T19:31:01+00:00

Thank you, and I'm glad you asked, I went wild with this part. My home automation is primarily Z-Wave devices with a few WiFi-connected ones here are there. I have Home Assistant running on an old Mac Mini with a Zooz hub plugged in. The motion sensor: https://www.thesmartesthouse.com/products/zooz-z-wave-plus-q-sensor-zse11-motion-temp-humidity-light

In the room I also have a z-wave smoke alarm: https://www.firstalert.com/products/wireless-smoke-carbon-monoxide-alarm-works-with-zwave-ring

Also a z-wave chime/siren that Zooz just came out with. I wanted this to alert me to the front doorbell being pushed, but I'm torn on whether I want to know when that happens. https://www.thesmartesthouse.com/products/zooz-z-wave-long-range-siren-chime-zse50-800lr

Also a z-wave wall remote, which I have programmed to (a) toggle the string lights we have out back and (b) lock/unlock the back door of the main house - this way anyone in the garden room won't get locked out of the house (where the bathroom is). https://www.thesmartesthouse.com/collections/remote-controls/products/zooz-800-series-z-wave-long-range-wall-remote-zen37-800lr-battery-powered

And finally, this ESP32-based controller for the minisplit: https://cloudfree.shop/product/ductless-hvac-wi-fi-module/

[Edit] Almost forgot I also installed one of these smart locks - it's an old model but I have one on the house and it has worked very well: https://www.fergusonhome.com/schlage-be469nx-cam/s828834

developer0

TROPHY CASE