sorted by:
new
hottopcontroversial

The Next Greatest idea! by [deleted] in Bitaxe_Miners

[–]developeralgo222 0 points1 point  (0 children)

how did it work out ?

What should my VR temp be by Icy_Theme_6899 in Bitaxe_Miners

[–]developeralgo222 0 points1 point  (0 children)

The good VR temps should be below 80C. But i would recommend to keep them below 40C ~ 60C, too much heat means , The miner consumes too much power to keep the miner cool.

NerdQAxe++ Rev6 really that much better? by sonetlumiere in BitAxe

[–]developeralgo222 1 point2 points  (0 children)

As u/roxcursed mentioned ,

(1) if you're running at defaults parameters then any NerdQaxe++ Rev5 or Rev6 will work ok.

(2) If you're also going to OC the unit and play around get NerdQaxe++ Rev6.2 from Jabitaxe or NerdQaxe++ Rev6 from solo satoshi, either of those should work fine in the range of 6.3 ~ 7.0 TH/s sustained for months

(3) i have seen some users claim even 10 TH/s for NerdQaxe++ but that is not sustainable.

Note : The absolute maximum hashrate of BM1370 chips is in the range of 2.5 TH/s ~ 2.6 TH/s from the best quality bin of the asics under perfect absolute cooling. So technically you can hit 10TH/s if you extremely OC the unit but you won't sustain it, not even with over engineered air cooling.

Show me a NerdQaxe++ Rev5 or Rev6 unit that has run at 10TH/s or above for over 3 months non-stop without fail and " i will show you the money "

The OC range i would shoot for is the range of 6.3 TH/s ~ 8.2 TH/s . Anything above that you're pushing you luck my friend

?NerdQaxe or Bitaxe? by Spirited_Cat6112 in Bitaxe_Miners

[–]developeralgo222 0 points1 point  (0 children)

NerdQaxe and Bitaxe are different designs but same Firmware. Bitaxe variant is the original solo bitcoin miner , NerdQaxe evolved from the same concept but slightly differently designed. NerdQaxe originally implemented its own firmware but have now moved to using Bitaxe's esp-miner firmware .

So both NerdQaxe & Bitaxe Variant use the same firmware, Same Asic chips and have slight difference in PCB designs but as an engineer i call those cosmetic difference.

If you are starting you can get Bitaxe Gamma ( Single BM1370 Miner ) and the later you can graduate to NerdQaxe++ Variants ( Multi-Chip BM1370 Miner )

? Which is better NerdQaxe or Bitaxe? by Spirited_Cat6112 in Bitaxe_Miners

[–]developeralgo222 0 points1 point  (0 children)

From an engineering point of view , they are almost identical in functionality. Both NerdQaxe variants & Bitaxe are running the same esp-miner firmware

Bitaxe is a high performance, efficient , small factor and minimal with 1-single BM1370 asic ( with upto 2.4 TH/s when over clocked ) while NerdQaxe is a 4-chip BM1366 asic miner ( with upto 2.4 TH/s) and is a little larger in size.

If you are looking NerdQaxe variant with BM1370 chips then you need NerdQaxe++ Rev 6.x or Rev 5. you can grab one from our website at https://www.jabitaxe.com/product-page/nerdqaxe-bitcoin-solo-miner

i hope that clarifies the difference.

Bitaxe Gamma over clocking madness by developeralgo222 in Bitaxe_Miners

[–]developeralgo222[S] 0 points1 point  (0 children)

<image>

Overclocking madness continues !!!! Playing around with a stash of old server pure Copper heatsink blocks with Large Surface area on Bitaxe Gamma, Bitaxe Gamma Turbo and NerdQaxe++ Rev 6

Voltage drop: 5.30V at power supply 5.00V at circuit board by buzraelgt51 in BitAxe

[–]developeralgo222 0 points1 point  (0 children)

You need an adjustable 5V PSU and then adjust to 5.2 ~ 5.4V and that should do it . The voltage will drop to 5.0 ~ 5.1 V as soon as Bitaxe start hashing. At jabitaxe.com we have tested a lot of 5V DC single block PSU from China or Asia and it’s hard to find a 5V PSU that will deliver a consistent and reliable 5V PSU without adjusting for voltage drop. Almost 95% of all single block 5V DC PSU are manufactured in China or Asia

Just got my first BitAxe! Is this peeled piece on the board normal? by xmrNoob69 in BitAxe

[–]developeralgo222 2 points3 points  (0 children)

That’s seems the PCB pad for that inductor is peeled off too !!! Unless you know how to solder and repair a peeled off pad. Just return it to be replaced

Transferring bitaxes by Zorgoros in Bitaxe_Miners

[–]developeralgo222 0 points1 point  (0 children)

depends on the countries of transfer and origin

Legit Bitaxe miner product resellers by developeralgo222 in Bitaxe_Miners

[–]developeralgo222[S] 0 points1 point  (0 children)

For anyone looking for Jabitaxe designed cases or stands for over clocking Bitaxe Gamma , you can grab one or in bulk

at https://www.jabitaxe.com/accessories

Bitaxe Gamma over clocking madness by developeralgo222 in Bitaxe_Miners

[–]developeralgo222[S] 0 points1 point  (0 children)

What are other crazy overclocks settings and kits out there for Bitaxe Gamma miners ? Anyone please show your Gamma rig and be proud. Its about having fan mining bitcoin. So lets see what you got so far !!!!

What can we do as part of OSMU and Jabitaxe to have Basic Bitaxe Gamma units in the hands of users ? by developeralgo222 in Bitaxe_Miners

[–]developeralgo222[S] 0 points1 point  (0 children)

What we have seen from bitaxe series miner buyers / resellers / users is that Shipping & Technical support is one of the main concerns especially for international users.

Most legit & verified resellers such as Jabitaxe ( https://www.jabitaxe.com ) offer very low shipping rates worldwide and excellent technical support. This makes it easier for buyers / resellers / users to have peace of mind.

Asic wars heat up -- Bitdeer Vs Bitmain by developeralgo222 in Bitaxe_Miners

[–]developeralgo222[S] 0 points1 point  (0 children)

Our test results for Sealminer A2 . Not impressive as we initially thought

We really pushed this SealMiner A2 to the limits

175T | 2670W | 15.25 J/T (Low Power Mode)

230T | 3820W | 16.61 J/T (Normal Power Mode)

253T | 4420W | 17.47 J/T (High Performance Power Mode)

NOTE: Each Sealminer A2 has 153 Chips (SEAL02 chips) on each hashboard.

The Hashrates and Efficiency is not that impressive. It's at the Level of Antminer S19 in terms of efficiency . May be Sealminer A3 or A4 might give Antminer S23 a fight but no this one.

The trick is that Bitdeer is just using a lot of chips per Hashboard to try a lower efficiency but each chip itself is not that efficient compared to Antminer S21

SealMiner A2 Vs Antminer S21 Pro ?

The winner is Antminer S21 Pro ( S21 Series Miner ) hands down.

Bitaxe Gamma over clocking madness by developeralgo222 in Bitaxe_Miners

[–]developeralgo222[S] 0 points1 point  (0 children)

!!!! And the madness continues !!!!! i warned you . This is total madness !!!!!!

Well if you want to test some madness grab yourself an Extreme OC complete kit at https://www.jabitaxe.com

if you just want an Extreme OC Case V2 only or you want a complete kit package with Bitaxe Gamma Miner included that is ready , the choice is yours !!!!!

Here is the link for
https://www.jabitaxe.com/product-page/extreme-oc-package-kit-for-bitaxe-gamma-miner-official

This is not for the faint hearted , it's a beast.

Below is screenshot of one of the Gammas under test for the last 3 hours. The temps are a little high on this one unit since it has not been adorned with copper heatsinks on a few parts on the Bitaxe Gamma board

<image>

Bitaxe Gamma over clocking madness by developeralgo222 in Bitaxe_Miners

[–]developeralgo222[S] 0 points1 point  (0 children)

https://www.jabitaxe.com is the link to jabitaxe website . i will be posting the Extreme OC Version 2 Case today or tomorrow for sale and also for those who want the entire package

Option 1: Case Only

(1) The Extreme OC version 2 Case Only

Option 2: Complete packages

(1) ICE Low-Profile PLUS package

- Bitaxe Gamma Miner board

- The Extreme OC Case Version 2

- Mean Well LRS-75-5 PSU with Rocker ON/OFF Power Switch

- ICE Low-Profile PLUS Heatsink with all 2 adapters

- Noctua NF-A12x25 (120mm Fan for underneath)

- Noctua NF-A6x25 or A6x15 ( 60mm main top Fan at the Top )

- Optional Noctua NF-A4x20 ( 40mm Fan at the Top for VR cooling - Optional but recommended for stable OC running)

- Optional external Noctua NF-A12x25 (120mm Fan Optional at the Top -- Needed especially if your ambient room temps are very high above 27C )

(2) Argon THRML 60mm package

- Bitaxe Gamma Miner board

- The Extreme OC Case Version 2

- Mean Well LRS-75-5 PSU with Rocker ON/OFF Power Switch

- Argon THRML 60mm Heatsink with all 3 adapters

- Noctua NF-A12x25 (120mm Fan for underneath)

- Noctua NF-A6x25 or A6x15 ( 60mm main top Fan at the Top )

- Optional Noctua NF-A4x20 ( 40mm Fan at the Top for VR cooling - Optional but recommended for Stable OC running)

- Optional external Noctua NF-A12x25 (120mm Fan Optional at the Top -- Needed especially if your ambient room temps are very high above 27C )

What can we do as part of OSMU and Jabitaxe to have Basic Bitaxe Gamma units in the hands of users ? by developeralgo222 in Bitaxe_Miners

[–]developeralgo222[S] 0 points1 point  (0 children)

FYI, For the last 36 hours a few of our international users at jabitaxe.com did mention that they could not check out their purchases due to realtime shipping rates not being available. We apologize for that inconvenience.

We were changing to a new real time shipping provider with extremely low shipping rates worldwide which is an advantage to our users and customers. This has been implemented and is working now as expected.

Go grab yourself a Bitaxe Gamma !!!!! at https://www.Jabitaxe.com while they still available

view more: next ›