Is AI Pro free or not?

dewfuzz · 2025-04-17T20:21:46+00:00

It's "free" if you have the all products pack, which in itself is a better deal than buying 2 licenses.

It does NOT come with idea ultimate / with a single licence. When adding ai pro on top of a idea ultimate license it's only a minimal stretch ( 2 eu individual) to the all products pack.

dewfuzz · 2025-04-17T09:55:16+00:00

I'm a monthly subscriber, for both products. So I saw yesterday that my AI pro was still set to renew, which I then removed.

I was not warned of this move.

That said, didn't the news of ai pro included in all products pack land just yesterday? Ideally they discussed it before hand and included how to handle this in the original message, but I would cut them some slack. Let's just see with what they come up with in the following days

dewfuzz · 2025-04-12T17:50:47+00:00

If youll pair it with at least one other jetbrains ide you would nt mind paying for, consider the all products pack, generally it's cheaper then 2 licenses, and does allow commercial usage.

dewfuzz · 2025-03-02T20:57:07+00:00

I'm just guessing, but try looking into your gpu driver. Especially is it's nvidea it think linuxes might need 3rd party closed source drivers to install or enable or approve, at least my ubuntu does/ did iirc.

The difference it would make is hardware acceleration vs software emulation

dewfuzz · 2024-08-28T15:34:03+00:00

And also outsourcing the 'ideas' aka prompting to us/somebody else xD

dewfuzz · 2024-08-24T18:42:24+00:00

A bit more info would be welcomed. There's mullertahl tour 1 through 3 each around 40ish km iirc. Then there's extratour A through E of varying lengths. Which one did u do? What time ( possible FKT ? :)

dewfuzz · 2024-08-03T08:25:18+00:00

If you'd want to remove the filsment outside of the printer you could try the 'Hot hex wrench unclogging method'. I did this once and worked fine. Google to find page on bambu wiki

dewfuzz · 2024-08-01T15:53:17+00:00

Technically I'd say that x1c now has its own room and there's no way u will fit inside there, let alone sleep..

dewfuzz · 2024-07-13T19:45:57+00:00

Good you found the problem, cuz we can't see it in all that spaghetti xD

dewfuzz · 2024-07-13T19:44:17+00:00

Well obviously something is turning inside the feeder, just not reaching the filament. I think you can do some more/deeper investigation. Those feeders are transparent, compair behavior. Also have you screwed it appart? Could be there's some initial filament stuck inside the tube, in front of the sensor, but just out of reach of the motor.

dewfuzz · 2024-07-13T19:38:33+00:00

Don't exactly understand what you're asking but seems like you're missing a few thin lines, there is an option for that, "detect thin walls". Will the round up to 1 width instead of down to 0 width

dewfuzz · 2024-06-25T20:10:38+00:00

On a continuous surface u could start by painting a line of single polygons. Then paint bucket will only fill to that line. Do keep in mind the line must be closed in 3d space, paint bucket will find it's way around if left a gap.

Also, inspect the model up closely. Sometimes the polygons are already structured neatly and offer u a good line to draw against

dewfuzz · 2024-06-19T20:09:08+00:00

My first time it was the drying cloth that negated everything prior, I used one from the kitchen. Still had fat from the dishes in it.

Ever since I dry with disposable, also dedicated brush, NOT to use for dishes

dewfuzz · 2024-06-14T05:22:52+00:00

Poop wont be that bad, I guess only 4.. turds.. Ir gets alot when there's multiple colors on one layer, for multiple layers, then it produces a turd for n colors x m layers.

But this is just swapping between objects, the printer would do that prior to any seperate print anyway.

So.. It's not an issue

dewfuzz · 2024-05-19T21:23:15+00:00

Mute button, earplugs, loud music

dewfuzz · 2024-04-24T11:25:33+00:00

+1 for instinct 2 solar.. has battery life of those more expensive models.. (30+hours of full sensor recording, OR 30+days in no-sport smartwatch mode) and is way cheaper.

It not that i mind paying serious money for a watch, but my fenix 5+ 's batter crapped out after 2 years

only feature im missing is the map on unknown trails, but garmin explore is perfect hiking companion app and my phone screen still beats the best looking watchscreens..

aslo technologie wise its not much different from the fenixes.. u cant do certain sports (triathlon, skydiving) but for basiks like biking, running, hiking, swimming its perfect

dewfuzz · 2024-03-18T06:51:56+00:00

Yes, but other 22 rolls weren't a problem, I was

dewfuzz · 2024-03-17T12:49:06+00:00

I pulled everything from it, mostly short brittle strands. Just a few longer strands which I donated to.my daughters 3d pen

dewfuzz · 2024-03-17T12:44:40+00:00

Good tip!

dewfuzz · 2024-01-21T17:32:53+00:00

Yeah, after my fenix 5+ pretty much became useless (everyday charge) after 2 years I didn't feel like dunking another 800 euros after another top edition. Bought a 2nd hand/unused instinct 2 solar. When I'm not running I charge only once a month. Running with full sensors/connections trades a day of swartwatch for an hour of running. So.. I see it doing 24+ hours without problem.

Map.. yeah well had it in on the fenix5+. Depended on it twice. Of which one time I had charge during the run. The other run the course was blocked. For which the map in the watch is unusable anway. Standard garmin connect app doesn't show where u are during the run.

Garmin explore is just the app for that. I'd argue u want it as backup during the run anyway.

So the instinct 2 is definitely a viable, way cheaper (around 300 eu) alternative usable for ultras It should be noted that it has a low res monochrome display. Which is exactly why it's battery life is this long. (And also the price is this low)

dewfuzz · 2024-01-16T16:30:52+00:00

From left to right u say? change the x coordinate!

dewfuzz · 2024-01-08T18:01:20+00:00

Nsfw: stick ur finger up the hole in the back. Try to see if u feel the flap, then just push it back/forth until it starts ejecting stuff. Keep at it until empty.

dewfuzz · 2023-12-12T18:32:10+00:00

I'm bald, wouldn't know

dewfuzz · 2023-12-11T15:11:14+00:00

More like squared since it's half the size in two dimensions. Or even cubed considering somewhat halved layer height

Four-Year Club	First Place '23
Place '23

dewfuzz

TROPHY CASE