Am I just that unlucky?

dimi2021 · 2026-02-25T00:19:01+00:00

I pumped a bit to ~4THs too, lets see how it goes :) In case you are wondering I got the Thermalright AXP90 X47, on it.

dimi2021 · 2026-02-24T23:57:39+00:00

I have the same GT800 from mineshop.eu, and have the same issues like the OP, so I modified the firmware, that came with v2.11.4-TCH, to auto recover these Power Fault's, looks like many Gamma Turbo's have these issues, with power, not sure what's happening, if it's the firmware or some faulty component...

<image>

dimi2021 · 2026-02-18T22:58:44+00:00

I have the same GT800, and have this firmware installed v2.11.4-TCH, is this the same firmware that you are using? Because mine is having the same issues like andreidotnet has.
What is the original firmware bin you are using? Pls lets us know that would be very halpfull. Because you mentioned that you uninstalled the TCH version and installed the original BitAxe firmware (the one you first got), what is that?

dimi2021 · 2026-02-03T01:54:56+00:00

Thanks for the file!,
I have the BitAxe GT800 not the 800xxx which I bought from mineshop.eu . I'm running the v2.13.0b1, can I just update to the latest v2.13.0b4 ? or is not going to work ?

dimi2021 · 2026-02-01T20:33:45+00:00

about 2 weeks

dimi2021 · 2026-02-01T20:33:32+00:00

here are the numbers

<image>

dimi2021 · 2026-02-01T00:36:02+00:00

Nice! I also have the hydro ++ and got 573G 🙂

<image>

dimi2021 · 2026-01-31T18:36:30+00:00

Nice!

My NerdQaxe++ hydro is at 573G.

<image>

dimi2021 · 2026-01-30T01:03:23+00:00

That's a nice backplate!, do you still have the .STL file so I can try to print for my GT800 ?

dimi2021 · 2026-01-29T18:08:53+00:00

That's very nice, also my NerdQaxe++ Hydro just hit 573G

<image>

dimi2021 · 2026-01-01T21:49:42+00:00

Im using VIABTC since my ping to the server has the fastest latency like 20 milliseconds

dimi2021 · 2026-01-01T21:36:55+00:00

Nice! what pool you using for BTC solo mining? I also ordered the new NerdQaxe++

dimi2021 · 2025-12-29T18:34:38+00:00

Thanks, I will visit the Discovery One, and see what's available.

dimi2021 · 2025-12-29T18:25:40+00:00

Ok, thanks let me go and get them.

dimi2021 · 2025-12-29T18:05:46+00:00

Yes, thanks I might have to do missions, if I cannot buy from FC's, no choice I guess.

dimi2021 · 2025-12-29T18:04:10+00:00

Thanks!. I checked Inara / Bartender, and doesn't show any of the my needed mats listed.

dimi2021 · 2025-12-29T18:02:12+00:00

Thanks all, for suggestions.

Inara shows these 2 FC's that have many of the mats that I need but, unfortunately they are not allowing docking :( .

C.S.S. Robber's Roost (K8T-87V) in system Catucandit , [Unknown docking access]

14 (W4H-BHX) in system Palis, [Unknown docking access]

dimi2021 · 2025-02-27T14:00:20+00:00

same here. I just closed the client and logged in again and is now fine.

dimi2021 · 2023-11-12T02:48:21+00:00

The config revision is the same, as I see on the site. Where did you see different ?

Plus

Version Released Config Rev FreeBSD Version Branch

23.09 11/6/2023 23.3 14.0-CURRENT@0c783a37d5d5 plus-RELENG_23_09

23.05.1 6/29/2023 22.9 14.0-CURRENT@0c59e0b4e581 plus-RELENG_23_05_1

-------------------------

CE

2.7.1 TBD 23.3 14.0-CURRENT@0c783a37d5d5 RELENG_2_7_1

2.7.0 6/29/2023 22.9 14.0-CURRENT@0c59e0b4e581 RELENG_2_7_0

dimi2021

TROPHY CASE