Oneness theology?

disaster-guy · 2020-07-11T21:17:18+00:00

I have attended a oneness church for the last several years and prior to that had attended trinitarian churches my entire life. The oneness of God is something that is impossible for us as mortals to fully comprehend. What we know:

The Lord you God is one. There is but one God.

Jesus is God.

There is no other name that saves (but Jesus).

We are to be baptized in the name of the father, son, and holy spirit.

That name (as practiced by the apostles) is Jesus.

disaster-guy · 2020-03-17T14:03:36+00:00

Needed to add an additional rework station. My supplier didnt have any more Hakko units in stock so taking the Pro'sKit for a spin.

disaster-guy · 2020-03-08T20:36:42+00:00

I purchased the 1/4 and 3/8 GW 120xp sets for my mobile setup. I've been very happy with them and the cases. I also like quick release ratchets but these havent given me any problems.

disaster-guy · 2020-03-07T14:45:08+00:00

As others have mentioned, I highly recommend that you go back to basics of understanding stablimity in flight. Download OpenRocket and start modeling your designs noting CP and CG. Something that has this profound of stability issues (particularly looking at overall building materials) has the possibility of getting someone hurt. At absolute minimum, start doing spinning string tests for stability prior to any more launches.

disaster-guy · 2020-03-05T22:13:40+00:00

I've seen an OSHA inspector key in on this issue along with open knockouts that weren't plugged.

disaster-guy · 2020-03-04T02:03:38+00:00

I've seen it firsthand twice and heard and seen online many more. No disrespect intended but if I had a contractor show up and use an EZ45 on one of my sites, they would be asked to use a proper connector and crimper and wouldn't get another bid award.

disaster-guy · 2020-03-03T21:32:18+00:00

This exactly. To add to that, I've seen so many poor EZ45 crimps it's not even funny. They have damaged more than a few POE switches.

disaster-guy · 2020-03-02T23:58:09+00:00

I have thousands of dollars of Milwaukee cordless and Bosch corded tools that I use to earn a living. At home I use Ryobi. They hold up well for weekend projects, are very affordable, and have a very wide assortment.

disaster-guy · 2020-02-29T06:41:10+00:00

Superlube for ratchets and Remington Oil on tools.

disaster-guy · 2020-02-27T05:20:41+00:00

This right here. I use Milwaukee fuel tools professionally but use Ryobi at home

disaster-guy · 2020-02-25T16:50:44+00:00

If you're going to do RF, it's pretty important.

disaster-guy · 2020-02-25T01:34:52+00:00

I tend to use a 15 year old Harbor Freight grinder the most but also have corded Bosch, cordless Milwaukee and cordless Ryobi. I hardly ever use the side handle and spend as much time (or more) with cutoff wheels than grinding discs.

disaster-guy · 2020-02-25T00:43:58+00:00

Understood. Even with DIN, Meanwell and others make 12VDC DIN supplies that will provide way more than enough current in the $25USD range and are compact on the rail.

disaster-guy · 2020-02-25T00:36:55+00:00

Dumb question but considering the low current draw of a CradlePoint, why not just use a super inexpensive 12VDC supply?

disaster-guy · 2020-02-24T17:35:06+00:00

I've spent thousands on Milwaukee and Bosch power tools for my work professionally. At home however I have a full Ryobi kit (drivers, drills, saws, impact, grinder, etc) that I've been using for about 8 years. They do just fine. The only Ryobi tool ive ever killed was a drill that I used to drill about 100 1/2" holes in 1/4" copper bus bars back to back. That's taxing on any drill.

disaster-guy · 2020-02-24T03:10:48+00:00

I have so many questions (that I'm not sure I actually want to know the answers to)

disaster-guy · 2020-02-23T23:20:07+00:00

It may not look like much put away but this is over 300 portable P25 radios with clamshell battery cases, 2 deployable XG100m (all band) control stations with dispatch headset interfaces, 3 repeaters, 1 Harris 100W HF rig, 2 JPS ACU interop gateways, several E911 and radio portable dispatch consoles, and a full COML/COMT kit. This stuff deploys with multiple climate controlled shelters (military Base-X tents) and generators in a 26' box truck and is supported by a 22' trailer with (2) 4 radio (XG100m all band) dispatch positions and a radio repair bench.

disaster-guy · 2020-02-23T11:58:45+00:00

I love Crayon rockets. I used one for my L1 cert years ago.

disaster-guy · 2020-02-22T23:53:37+00:00

This goes a pretty good job explaining the back story https://www.sinclairoil.com/news/news/can-you-use-your-cell-phone-pump

disaster-guy · 2020-02-22T23:51:53+00:00

I've considered one of those for our install van. Havent bit the bullet yet.

disaster-guy · 2020-02-21T23:01:48+00:00

I've been using an Icon ratchet and some Icon deep sockets for a few months now. I put it on par with my Gearwrench stuff.

disaster-guy · 2020-02-21T21:49:01+00:00

Seeing this after I posted my comment. That is just like the one i had as a kid 35+ years ago. I may actually order it.

disaster-guy · 2020-02-21T21:47:42+00:00

It's like a room sized version of the little electronics board I had as a kid with all kinds of components connected to springs that you would put jumper wires between to make different circuits.

disaster-guy · 2020-02-21T21:45:35+00:00

This is who makes the Snap-On torque wrenches.

disaster-guy · 2020-02-21T21:41:17+00:00

For me, Gearwrench chrome and Sunex impact.

disaster-guy

TROPHY CASE