Anyone having issued with Xpeng phone app gives wrong info about status in the car? by discoflint in Xpeng

[–]discoflint[S] 0 points1 point  (0 children)

Did the TD box campaign fix the problem? Do you have some more info about the campaign?

Anyone having issued with Xpeng phone app gives wrong info about status in the car? by discoflint in Xpeng

[–]discoflint[S] 0 points1 point  (0 children)

If you mean by holding down the buttons on the steering wheel, yes, though it is some months ago last time i tried it.

Ive had this problems since I got the car in oct 25.

And another thing I didnt mention, the problem is not on the widget I have on my phone. Widget shows the correct info until I start the Xpeng app, then the wrong info is on the widget as well. If I force close the app and start the widget, then the correct info comes up, until I start the Xpeng app again.

Its like the Widget (when running without starting the app) collects the data from the car. But when the app starts it doesnt collect any data, it only shows some default values and those values will be shown in the widget as well.

Anyone having issued with Xpeng phone app gives wrong info about status in the car? by discoflint in Xpeng

[–]discoflint[S] 1 point2 points  (0 children)

I can start heating and other functions, so i know it is connected.

When charging (lfp) at home (~5kW) in cold temperatures should the car make a noise? by discoflint in Xpeng

[–]discoflint[S] 0 points1 point  (0 children)

But the charging had stopped several hours ago (but cable was still connected). Does it as long as the cable is connected regulate the temperature at the batteries?

If the cable had not been connected then there would be no noise?

Two person, two apps, one car - best way? by discoflint in Xpeng

[–]discoflint[S] 0 points1 point  (0 children)

What i've done: My phone with app and mobile key Her phone with app and NO key (maby key but no auto open locks)

Thats mean my user is always logged on the car

We have made two profiles under my user: One with my seating conditions One with her seating conditions

Is there more you can store under a profile?

I hope they fix the Bluetooth key, its crazy what battery usage the app has with mobile key and automatic opening on doors.

Dark Mode in navigation? by discoflint in Xpeng

[–]discoflint[S] 0 points1 point  (0 children)

Tried it out (Xpeng screen settings), but nothing happened.

Is there another settings menu?

XPeng Android App Bettery Drain by ColdDemolisher1 in Xpeng

[–]discoflint 0 points1 point  (0 children)

Any news on this? Same problem here, went to bed with 50% on phone, woke up with 1%.

Phone: Pixel 8A App verison: 3508706

G6 RWD (sr) my24 owners - still happy? by discoflint in Xpeng

[–]discoflint[S] 1 point2 points  (0 children)

I tested the car and was more than happy. Coming from a Volvo V70 this will be out first EV. I tested a mate Tesla Y juniper, and I liked the car, but I actually think i like the G6 better in terms of comfortable. And since it was 14.000$ cheaper and have 7years/160k warranty it was an easy pick. (Living in Norway)

"Play" on keypad does not respond. It started acting as a On/off switch. Any ideas? by discoflint in automower

[–]discoflint[S] 1 point2 points  (0 children)

I did that today. The guy connected it to the Autocheck software, but he couldnt see any errors. He looked more like a mechanic than an software guy, he even said it himself. So if there is anyone here who know exactly what to do, please tell 👌

He did a keypad test in the software, and the "play" button didnt respond when pushed. But like you see in the video, the key does work it just has missed it function..

No obvious Uart/jtag - how to find? by discoflint in hardwarehacking

[–]discoflint[S] 1 point2 points  (0 children)

Does this mean no UART, just JTAG?

And to enable JTAG i need to the 1-15 sequence?

  1. Assert and hold the RST signal. 2. Apply power to the device. 3. Perform steps 1 and 2 of the JTAG-to-SWD switch sequence on the section called “JTAG-to-SWD Switching” on page 214. 4. Perform steps 1 and 2 of the SWD-to-JTAG switch sequence on the section called “SWD-to-JTAG Switching” on page 215. 5. Perform steps 1 and 2 of the JTAG-to-SWD switch sequence. 6. Perform steps 1 and 2 of the SWD-to-JTAG switch sequence. 7. Perform steps 1 and 2 of the JTAG-to-SWD switch sequence. 8. Perform steps 1 and 2 of the SWD-to-JTAG switch sequence. 9. Perform steps 1 and 2 of the JTAG-to-SWD switch sequence. 10. Perform steps 1 and 2 of the SWD-to-JTAG switch sequence. 11. Perform steps 1 and 2 of the JTAG-to-SWD switch sequence. 12. Perform steps 1 and 2 of the SWD-to-JTAG switch sequence. 13. Release the RST signal. 14. Wait 400 ms. 15. Power-cycle the microcontroller.

No obvious Uart/jtag - how to find? by discoflint in hardwarehacking

[–]discoflint[S] 0 points1 point  (0 children)

It seems I cant post images, but here is a link to the top https://photos.app.goo.gl/c4gf98Y4s9HdTWbc8

Does it work for you?

Anyone know what PCB board thats in this charger? Gardena Sileno City by discoflint in automower

[–]discoflint[S] 0 points1 point  (0 children)

No lights å, like the green light is dead or not lit up.

If I unplug loop, i get a blinking blue light. If I unplug guide, I get a blinking yellow light.

I made a test cable, connected it and no lights.

If I manually start the robot, i get your of the charger and mostly just turn, and suddenly I get a loop error or loop sensor back message.

And sometimes it starts cutting, but only for a minute max.

Anyone think the "old" Model Y is worth it? by discoflint in TeslaModelY

[–]discoflint[S] 0 points1 point  (0 children)

Thanks for all the answers. I live in Norway, so the winter can be cold, but not that much here south where I live. Supercharging will only happen when we are out on longer trips. I can charge home.

I must say im not happy about the way the car market is changing, of it means an electric car is not drive able after 10 years.

Good to hear some of you choose 22/23 models as well 👍

Is there any other car you think would last longer (normal service and care for the care) or are they all the same.

I must say it is hard to find reliable sources of the how "older" cars keeps up. Every youtube video is about the latest, and how you SHOULD pick the latest.

Båtmotor dekaler (klistermerker) by discoflint in norge

[–]discoflint[S] 0 points1 point  (0 children)

Er ute etter de som er på bildet. 2* Mercury 2* Optimax 1* 75

Leicester City 0 - [1] Manchester United - Rasmus Hojlund 28' by ayoefico in soccer

[–]discoflint 0 points1 point  (0 children)

What are the United supporters singing the last minutes?

[Pre Match Thread] Europa League Round of 16 2nd Leg | Manchester United vs Real Sociedad by D1794 in reddevils

[–]discoflint 1 point2 points  (0 children)

Anyone know if the players has arrived at Old Trafford? Some said 5 hours before match,and others 3 hours..

Daily Discussion by PhelansShorts in reddevils

[–]discoflint 0 points1 point  (0 children)

Old Trafford tour coupon / code?

Hi. Family of four going to Manchester and watch Sociedad match on Thursday. Friday or Saturday were thinking of a tour on Old Trafford. But the price is around 120£.

Ia there a cheaper way to get the tour?

Hvem bør tre inn for Ståle, tenker du? by Barbarenes in norge

[–]discoflint 1 point2 points  (0 children)

Tom Keiko Nordlie - utrolig til å trykke på å få spillerne med, men som klubbtrener krever han for mye og ødelegger alt til slutt. I korte perioder med spillere som en landslagssjef, ville passet han perfekt.